Panasonic Kx-tda600 - hybrid ip pbx control unit max. 1008... User manual

Model No.

KX-TDA600

Hybrid IP-PBX

Installation Manual

Thank you for purchasing a Panasonic Hybrid IP-PBX.

Please read this manual carefully before using this product and save this manual for future use.

KX-TDA600: PLMPR Software File Version 3.1000 or later SD Logo is

a trademark.

Document Version: 2006-07

2 Installation Manual

System Components

System Components Table

Category Model No. Description

Basic Shelf KX-TDA600 Basic Shelf

Main Processing Card Main Processing Card (EMPR)

EMPR Optional Card KX-TDA6105 Memory Expansion Card (EMEC)

KX-TDA0196 Remote Card (RMT)

Optional Shelf Expansion

Cards

KX-TDA6110 Bus Master Card (BUS-M)

KX-TDA6111 Bus Master Expansion Card (BUS-ME)

Expansion Shelf KX-TDA620 Expansion Shelf

Built-in Shelf

Expansion Card

Bus Slave Card (BUS-S)

Mounting Kit KX-TDA6201 Mounting Kit for expanding to a 3- or 4- shelf System

CO Line Cards KX-TDA0187 T-1 Trunk Card (T1)

KX-TDA0193 8-Port Caller ID Card (CID8)

KX-TDA0290 PRI Card (PRI23)

KX-TDA0484 4-Channel VoIP Gateway Card (IP-GW4E)

KX-TDA0490 16-Channel VoIP Gateway Card (IP-GW16)

KX-TDA6181 16-Port Analog Trunk Card (ELCOT16)

Extension Cards KX-TDA0143 4 Cell Station Interface Card (CSIF4)

KX-TDA0144 8 Cell Station Interface Card (CSIF8)

KX-TDA0170 8-Port Digital Hybrid Extension Card (DHLC8)

KX-TDA0171 8-Port Digital Extension Card (DLC8)

KX-TDA0172 16-Port Digital Extension Card (DLC16)

KX-TDA0173 8-Port Single Line Telephone Extension Card (SLC8)

KX-TDA0470 16-Channel VoIP Extension Card (IP-EXT16)

KX-TDA6174 16-Port Single Line Telephone Extension Card (ESLC16)

KX-TDA6175 16-Port Single Line Telephone Extension with Message

Lamp Card (EMSLC16)

Installation Manual 3

Other Cards KX-TDA0161 4-Port Doorphone Card (DPH4)

KX-TDA0164 4-Port External Input/Output Card (EIO4)

KX-TDA0168 Extension Caller ID Card (EXT-CID)

KX-TDA0190 Optional 3-Slot Base Card (OPB3)

KX-TDA0191 4-Channel Message Card (MSG4)

KX-TDA0410 CTI Link Card (CTI-LINK)

KX-TDA6166 16-Channel Echo Canceller Card (EECHO16)

Optional SD Memory Card KX-TDA6920 SD Memory Card for Software Upgrade to Enhanced

Version

Power Supply Units

(PSUs)

KX-TDA0103 L-Type Power Supply Unit (PSU-L)

KX-TDA0104 M-Type Power Supply Unit (PSU-M)

Cell Stations (CSs) KX-T0141 2-Channel Cell Station Unit Using a DHLC/DLC Card (PT-

interface CS) for 2.4 GHz Portable Station

KX-TDA0142 3-Channel Cell Station Unit Using a CSIF Card for 2.4 GHz

Portable Station

Proprietary Equipment KX-A258 Blank Slot Cover

KX-T30865 Doorphone

System Components Table

Category Model No. Description

4 Installation Manual

Unsupported Optional Equipment

Most optional equipment supported by the KX-TDA100/KX-TDA200 can also be used with the KX-TDA600.

However, the items listed below are not supported by the KX-TDA600.

Available Proprietary Telephones

The Hybrid IP-PBX supports Panasonic KX-T7000, KX-TD7000, and KX-NT series telephones:

• Digital/Analog/IP proprietary telephones (e.g., KX-T7625, KX-T7630, KX-T7633, KX-T7636, KX-

NT136)

• Portable stations (e.g., KX-TD7690)

• DSS consoles (e.g., KX-T7640)

Note

The Hybrid IP-PBX does not support the following telephones:

• KX-T30800 series Proprietary Telephones and DSS consoles

• KX-T61600 series Proprietary Telephones and DSS consoles

• KX-T123200 series Proprietary Telephones and DSS consoles

For the equipment (e.g., Add-on Key Module, USB Module, Headset*1) that can be connected to a particular

telephone, refer to the telephone's manual.

For other equipment that can be connected to the Hybrid IP-PBX, refer to "1.2.3 System Connection

Diagram".

Category Model No. Description

MPR Optional Card KX-TDA0105 Memory Expansion Card (MEC)

CO Line Cards KX-TDA0180 8-Port Analog Trunk Card (LCOT8)

KX-TDA0181 16-Port Analog Trunk Card (LCOT16)

KX-TDA0183 4-Port Analog Trunk Card (LCOT4)

Extension Cards KX-TDA0174 16-Port Single Line Telephone Extension Card

(SLC16)

KX-TDA0175 16-Port Single Line Telephone Extension with

Message Lamp Card (MSLC16)

Other Card KX-TDA0166 16-Channel Echo Canceller Card (ECHO16)

Optional SD Memory

Cards

KX-TDA0920 SD Memory Card for Software Upgrade to Enhanced

Version

PSU KX-TDA0108 S-Type Power Supply Unit (PSU-S)

*1 The KX-T7090 headset can be connected to the KX-T7000, KX-T7200, KX-T7300, and KX-T7400 series telephones.

Installation Manual 5

Abbreviations in this manual

Proprietary telephone: PT

Digital proprietary telephone: DPT

Analog proprietary telephone: APT

IP proprietary telephone: IP-PT

Portable station: PS

Single line telephone: SLT

Important Notice

Prior to connection of this product, please verify that the intended operating environment is supported.

Satisfactory performance cannot be guaranteed for the following:

– interoperability and compatibility with all devices and systems connected to this product

– proper operation and compatibility with services provided by telecommunications companies over

connected networks

6 Installation Manual

Important Safety Instructions

SAFETY REQUIREMENTS

When using your telephone equipment, basic safety precautions should always be followed to reduce the

risk of fire, electric shock and injury to persons, including the following:

1. Read and understand all instructions.

2. Follow all warnings and instructions marked on the product.

3. Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.

Clean with a damp cloth.

4. Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink, or laundry

tub, in a wet basement, or near a swimming pool.

5. Do not place the product on an unstable surface, as a fall may cause serious internal damage.

6. Slots and openings in the front, back and bottom of the cabinet are provided for ventilation; to protect

it from overheating, these openings must not be blocked or covered. The openings should never be

blocked by placing the product on a bed, sofa, rug, or other similar surface while in use. The product

should never be placed near or over a radiator or other heat source. This product should not be placed

in a sealed environment unless proper ventilation is provided.

7. The product should only be connected to the type of electrical power supply specified on the product

label. If you are not sure of the type of power supply to your home, consult your dealer or local power

company.

8. For safety purposes this unit is equipped with a grounded plug. If you do not have a grounded outlet,

please have one installed. Do not bypass this safety feature by tampering with the plug.

9. Do not allow anything to rest on the power cord. Do not locate this product where the power cord may

be stepped on or tripped on.

10. To reduce the risk of fire or electric shock, do not overload wall outlets and extension cords.

11. Do not insert objects of any kind into this product through its slots and openings, as they may touch

dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill

liquid of any kind on or in the product.

12. To reduce the risk of electric shock, do not disassemble this product. Only qualified personnel should

service this product. Opening or removing covers may expose you to dangerous voltages or other risks.

Incorrect reassembly can cause electric shock.

13. Unplug this product from the wall outlet and have it serviced by qualified service personnel in the

following cases:

a) When the power supply cord or plug is damaged or frayed.

b) If liquid has been spilled into the product.

c) If the product has been exposed to rain or water.

d) If the product does not operate according to the operating instructions. Adjust only the controls that

are explained in the operating instructions. Improper adjustment of other controls may result in

damage and may require service by a qualified technician to restore the product to normal

operation.

e) If the product has been dropped or the cabinet has been damaged.

f) If product performance deteriorates.

14. Avoid using wired telephones during an electrical storm. There is a remote risk of electric shock from

lightning.

15. Do not use a telephone in the vicinity of a gas leak to report the leak.

Installation Manual 7

SAVE THESE INSTRUCTIONS

8 Installation Manual

Precaution

WARNING

DO NOT REMOVE

SD MEMORY CARD

WHILE POWER IS

SUPPLIED TO THE

HYBRID.IP-PBX

Doing so may cause the Hybrid IP-PBX

to fail to start when you try to restart

the system.

Installation Manual 9

• Keep the unit away from heating appliances and devices that generate electrical noise such as

fluorescent lamps, motors and televisions. These noise sources can interfere with the performance of

the Hybrid IP-PBX.

• This unit should be kept free of dust, moisture, high temperature (more than 40 °C [104 °F]) and

vibration, and should not be exposed to direct sunlight.

• If you are having problems making calls to outside destinations, follow this procedure to test the CO

lines:

1. Disconnect the Hybrid IP-PBX from all CO lines.

2. Connect known working SLTs to those CO lines.

3. Make a call to an external destination using those SLTs.

If a call cannot be carried out correctly, there may be a problem with the CO line that the SLT is

connected to. Contact your telephone company.

If all SLTs operate properly, there may be a problem with your Hybrid IP-PBX. Do not reconnect the

Hybrid IP-PBX to the CO lines until it has been serviced by an authorized Panasonic Factory Service

Center.

• Wipe the unit with a soft cloth. Do not clean with abrasive powders or with chemical agents such as

benzene or thinner.

WARNING

• THIS UNIT MAY ONLY BE INSTALLED AND SERVICED BY QUALIFIED SERVICE

PERSONNEL.

• IF DAMAGE TO THE UNIT EXPOSES ANY INTERNAL PARTS, DISCONNECT THE

POWER SUPPLY CORD IMMEDIATELY AND RETURN THE UNIT TO YOUR DEALER.

• UNPLUG ALL INSTALLED SHELVES OF THE SYSTEM FROM THE AC OUTLET IF IT

EMITS SMOKE, AN ABNORMAL SMELL OR MAKES UNUSUAL NOISE. THESE

CONDITIONS CAN CAUSE FIRE OR ELECTRIC SHOCK. CONFIRM THAT SMOKE

HAS STOPPED AND CONTACT AN AUTHORIZED PANASONIC FACTORY SERVICE

CENTER.

• WHEN RELOCATING THE EQUIPMENT, FIRST DISCONNECT THE TELECOM

CONNECTION BEFORE DISCONNECTING THE POWER CONNECTION. WHEN THE

UNIT IS INSTALLED IN THE NEW LOCATION, RECONNECT THE POWER FIRST,

AND THEN RECONNECT THE TELECOM CONNECTION.

• THIS UNIT IS EQUIPPED WITH A GROUNDING CONTACT PLUG. FOR SAFETY

REASONS, THIS PLUG MUST ONLY BE CONNECTED TO A GROUNDING CONTACT

SOCKET WHICH HAS BEEN INSTALLED ACCORDING TO REGULATIONS.

• TO PREVENT POSSIBLE FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

PRODUCT TO RAIN OR MOISTURE.

• THE POWER SUPPLY CORD IS USED AS THE MAIN DISCONNECT DEVICE.

ENSURE THAT THE AC OUTLET IS LOCATED NEAR THE EQUIPMENT AND IS

EASILY ACCESSIBLE.

CAUTION

• DANGER OF EXPLOSION EXISTS IF A BATTERY IS INCORRECTLY REPLACED. REPLACE

ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE BATTERY

MANUFACTURER. DISPOSE OF USED BATTERIES ACCORDING TO THE

MANUFACTURER'S INSTRUCTIONS.

10 Installation Manual

• THE SD MEMORY CARD POSES A CHOKING HAZARD. KEEP THE SD MEMORY CARD OUT

OF REACH OF CHILDREN.

Password Security

Warning to the Administrator or Installer regarding the system password

1. Please provide all system passwords to the customer.

2. To avoid unauthorized access and possible abuse of the PBX, keep the passwords secret, and

inform the customer of the importance of the passwords, and the possible dangers if they become

known to others.

3. The PBX has default passwords preset. For security, change these passwords the first time that

you program the PBX.

4. Change the passwords periodically.

5. It is strongly recommended that passwords of 10 numbers or characters be used for maximum

protection against unauthorized access. For a list of numbers and characters that can be used in

system passwords, refer to "1.1.2 Entering Characters" in the PC Programming Manual.

6. If a system password is forgotten, it can be found by loading a backup of the system data into a

PC, and checking the password using the KX-TDA600 Maintenance Console software. If you do

not have a backup of the system data, you must reset the PBX to its factory defaults and reprogram

it. Therefore, we strongly recommend maintaining a backup of the system data. For more

information on how to back up the system data, refer to "2.4.1 Tool—SD memory backup" in the

PC Programming Manual.

However, as system passwords can be extracted from backup copies of the system data file, do

not allow unauthorized access to these files.

Installation Manual 11

When you ship the product

Carefully pack and send it prepaid, adequately insured and preferably in the original carton. Attach a

postage-paid letter, detailing the symptom, to the outside of the carton. DO NOT send the product to the

Executive or Regional Sales offices. They are NOT equipped to make repairs.

Product Service

Panasonic Factory Servicenters for this product are listed in the servicenter directory. Consult your certified

Panasonic dealer for detailed instructions.

For Future Reference

Please print, record, and retain the following information for future reference.

Note

The serial number of this product can be found on the label affixed to the unit. You should record the

model number and the serial number of this unit as a permanent record of your purchase to aid in

identification in the event of theft.

MODEL NO.

SERIAL NO.

DATE OF PURCHASE

NAME OF DEALER

DEALER'S ADDRESS

DEALER'S TEL. NO.

12 Installation Manual

Introduction

This Installation Manual is designed to serve as an overall technical reference for the Panasonic Hybrid IP-

PBX, KX-TDA600. It provides instructions for installing the hardware, and programming the Hybrid IP-PBX

using the KX-TDA600 Maintenance Console.

The Structure of this Manual

This manual contains the following sections:

Section 1 System Outline

Provides general information on the Hybrid IP-PBX, including the system capacity and specifications.

Section 2 Installation

Describes the procedures to install the Hybrid IP-PBX. Detailed instructions for planning the installation

site, installing the shelves and optional service cards, and cabling of peripheral equipment are provided.

Further information on system expansion and peripheral equipment installation is included.

Section 3 Guide for the KX-TDA600 Maintenance Console

Explains the installation procedure, structure, and basic information of the KX-TDA600 Maintenance

Console.

Section 4 Troubleshooting

Provides information on the Hybrid IP-PBX and telephone troubleshooting.

About the Other Manuals

Along with this Installation Manual, the following manuals are available:

Feature Manual

Describes all basic, optional and programmable features of the Hybrid IP-PBX.

PC Programming Manual

Provides step-by-step instructions for performing system programming using a PC.

PT Programming Manual

Provides step-by-step instructions for performing system programming using a PT.

Operating Manual

Provides operating instructions for end users using a PT, SLT, PS, or DSS Console.

About the software version of your Hybrid IP-PBX

The contents of this manual apply to Hybrid IP-PBXs with a certain software version, as indicated on the

cover of this manual. To confirm the software version of your Hybrid IP-PBX, see "How do I confirm the

software version of the PBX or installed cards?" in the FAQ of the PC Programming Manual, or "[190] Main

Processing (MPR) Software Version Reference" in the PT Programming Manual.

Trademarks

• Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in

the United States and/or other countries.

• Intel and Celeron are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the United States and other countries.

• All other trademarks identified herein are the property of their respective owners.

• Screen shots reprinted with permission from Microsoft Corporation.

Installation Manual 13

F.C.C. REQUIREMENTS AND RELEVANT

INFORMATION

1. Notification to the Telephone Company

This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On

the side of this equipment is a label that contains, among other information, a product identifier in the

following format:

• US:AAAEQ##TXXXX

If requested, this number must be provided to the telephone company.

Installation must be performed by a qualified professional installer. If required, provide the telephone

company with the following technical information:

• Telephone numbers to which the system will be connected

• Make: Panasonic

• Model: KX-TDA600

• Certification No.: found on the side of the unit

• Ringer Equivalence No.: 0.4B

• Facility Interface Code: 02LS2, 04DU9.BN/DN/1KN/1SN

• Service Order Code: 9.0F, 6.0P

• Required Network Interface Jack: RJ21X, RJ48C

2. Ringer Equivalence Number (REN)

The REN is used to determine the number of devices that may be connected to a telephone line.

Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming

call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number

of devices that may be connected to a line, as determined by the total RENs, contact the local telephone

company. For products approved after July 23, 2001, the REN for this product is part of the product

identifier that has the following format:

• US:AAAEQ##TXXXX

The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier

products, the REN is separately shown on the label.

3. Incidence of Harm to the Telephone Lines

If this equipment causes harm to the telephone network, the telephone company will notify you in

advance that temporary discontinuance of service may be required. But if advance notice isn't practical,

the telephone company will notify the customer as soon as possible. Also, you will be advised of your

right to file a complaint with the FCC if you believe it is necessary.

4. Changes in Telephone Company Communications Facilities, Equipment, Operations and

Procedures

The telephone company may make changes in its facilities, equipment, operations or procedures that

could affect the operation of the equipment. If this happens the telephone company will provide

advance notice in order for you to make necessary modifications to maintain uninterrupted service.

5. Trouble with this equipment

If trouble is experienced with this equipment, for repair or warranty information, please see the attached

warranty, which includes the Servicenter Directory. If the equipment is causing harm to the telephone

network, the telephone company may request that you disconnect the equipment until the problem is

resolved.

6. Connection to Party Line

Connection to party line service is subject to state tariffs. Contact the state public utility commission,

public service commission or corporation commission for information.

14 Installation Manual

7. Combined Use with Alarm Equipment

If your home has specially wired alarm equipment connected to the telephone line, ensure the

installation of this equipment does not disable your alarm equipment. If you have questions about what

will disable alarm equipment, consult your telephone company or a qualified installer.

Note

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAUTION

Any changes or modifications not expressly approved by the party responsible for compliance could

void the user's authority to operate this device.

When programming emergency numbers and/or making test calls to emergency numbers:

1. Remain on the line and briefly explain to the dispatcher the reason for the call before hanging up.

2. Perform such activities in the off-peak hours, such as early morning hours or late evenings.

WARNING

The software contained in the ARS and TRS features to allow user access to the

network must be upgraded to recognize newly established network area codes and

exchange codes as they are placed into service. Failure to upgrade the premises PBXs

or peripheral equipment to recognize the new codes as they are established will restrict

the customer and the customer's employees from gaining access to the network and

to these codes.

KEEP THE SOFTWARE UP-TO-DATE WITH THE LATEST DATA.

Installation Manual 15

For Cell Station

CAUTION

Any changes or modifications not expressly approved by the party responsible for compliance could

void user's authority to operate this device.