Panasonic EH1673-A3 User manual

©2005 Matsushita Electric Works (Thailand), Ltd.All
rights reserved. Unauthorized copying and
distribution is a violation of law.
EH1673-A3
EH1613-T3
Negative Ion Steam Hair Straightener
SPECIFICATIONS
EH1673
Power Source
A
C220-240V / 50-60Hz
Rated current 0.2A
Tank Quantity approximately 6 ml
Steam discharge rate approximately 0.35 ml/min
Iron pipe temperature approximately 145°C
Cord length 1.7 m
Weight approximately 375 g (B2 plug)
approximately 435 g (S3 plug)
EH1613
Power Source
A
C110V / 50-60Hz
Rated current 31W
Tank Quantity approximately 6 ml
Steam discharge rate approximately 0.35 ml/min
Iron pipe temperature approximately 145°C
Cord length 1.7 m
Weight approximately 320 g (A2 plug)
ORDER NO. MEWT0511A02CE3

1 SCHEMATIC DIAGRAM 3
2 WIRING CONNECTION DIAGRAM 4
3 DISASSEMBLY INSTRUCTIONS 5
4 TROUBLESHOOTING GUIDE 9
5 EXPLODED VIEW 10
6 REPLACEMENT PARTS LIST 11
CONTENTS
Page Page
2
EH1673-A3 / EH1613-T3

1 SCHEMATIC DIAGRAM
1.1. EH1673
1.2. EH1613
3
EH1673-A3 / EH1613-T3

2 WIRING CONNECTION DIAGRAM
2.1. EH1673
2.2. EH1613
4
EH1673-A3 / EH1613-T3

1. Remve Ion Charge Panel from Main Body.
3. Remove The Fixing Ring and Clip Cover by push at 2
hooks.
2. Remove Tapping Serew(2.0x20)and torx Screw(2.6x6) .
4. Remove Discharge Cover (no printing side) from Main Body
as show in Figure.
3 DISASSEMBLY INSTRUCTIONS
5
EH1673-A3 / EH1613-T3

5. Remove Tapping Screw (3.0x10) from Main Body.
7. Remove Discharge Cover (Primting side) from Main Body.
6. Take off the shaft (on printing side) from Main Body.
8. Take off Discharge Cover from Shaff and take off Discharge
Holder from discharge Cover.
6
EH1673-A3 / EH1613-T3

9. Remove 2 Tapping Screws (2.0x6.0) from Main Body.
11. Take off Lever B/K from Main Body by backside.
13. Remove 5 Tapping Screws from Lever
10. Remove Steam Iron Cover from Main Body by push at 4
hooks.
12. Input Discharge Holder into hold of Main Body by arrow
side.
7
EH1673-A3 / EH1613-T3

14. Take off LED B/K by solder 2 points.
15. Take off Dry Iron Plate by solder 2 points.
16. Take off Steam Iron Plate by solder 2 points.
8
EH1673-A3 / EH1613-T3

4 TROUBLESHOOTING GUIDE
9
EH1673-A3 / EH1613-T3

5 EXPLODED VIEW
10
EH1673-A3 / EH1613-T3