Panasonic KX-T7710 User manual

Quick Reference Guide
Model No. KX-T7710
Important Information
When using the KX-T7710, keep the following conditions in mind.
• If there is any problem, unplug the extension line and connect a known working phone.
If the known working phone operates properly, have the defective phone repaired by
your dealer. If the known working phone does not operate properly, check the
Panasonic KX series Business Telephone System and the internal extension wiring.
• Keep the unit away from heating appliances and electrical noise generating devices
such as fluorescent lamps and motors.
• The unit should be kept free of dust, moisture and vibration, and should not be exposed
to direct sunlight.
• Do not use thinner, or any abrasive powder to clean the cabinet. Wipe it with a soft
cloth.
• Do not disassemble this product. Dangerous electrical shock could result. The unit
must only be disassembled and repaired by qualified service technicians.
• Do not use any handset other than a Panasonic handset.
• This apparatus is designed to be operated under controlled conditions of temperature
and humidity.
• Avoid installing the apparatus in damp or humid environments, such as in bathrooms or
near swimming pools.
• 999 and 112 can be dialled on the apparatus after accessing the exchange line for the
purpose of making outgoing calls to the BT emergency (999) and (112) services.
WARNING:
TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR ANY TYPE OF MOISTURE.
THIS HANDSET EARPIECE IS MAGNETISED AND MAY RETAIN SMALL FERROUS OBJECTS.
IMPORTANT NOTICE:
This product is designed for use in the U.K.
Note:
In this manual, the suffix of each model number is omitted.
2003 Panasonic Communications Co., Ltd. All Rights Reserved.

Off-hook On-hook Feature number Talk
* "Location of Controls" is shown on page 6.
Desired Function Operation
Calling
One-touch
Dialling
Calling an
operator
Personal
Speed Dialling
To an extension To an external party
phone no.
extension no.
To dial
Making Calls
The REDIAL will dial the last number you called manually.
line access
no.
Press One-touch button.
/
Quick Dialling
quick dial no.
To store
* The Feature numbers described in this manual are for KX-TE Series or KX-TDA Series.
If a different Panasonic KX series Business Telephone System is connected, please
refer to its manuals.
To store
desired no.
(max. 24 digits)
/
Press One-touch button.
desired no.
(TE: max. 24 digits)
Redial
(TDA: max. 32 digits)
Features List
KX-TE Series
KX-TDA Series
To dial
KX-TE Series
KX-TDA Series
System
Speed Dialling
To dial
KX-TE Series
KX-TDA Series
Personal speed
dial no.
System speed
dial no.
Personal speed
dial no.
TDA: 00-99 (Default: 00-09)
– 2 –
TE: 0-9
TDA: 000-999
TE: 00-99
TDA: 00-99 (Default: 00-09)
TE: 0-9

Desired Function Operation
Features List
When the Dialled Extension is Busy/No Answer
Receiver
Sender
To call back
Message
Waiting
extension no.
Leave
Cancel
To leave/cancel a notification
– 3 –
extension no.
Leave
Cancel
KX-TE Series
KX-TDA Series
Holding To retrieve a call at the holding extension
Announce.
dial no.
Holding a call
Transferring
a call
During a Conversation
KX-TE Series KX-TE Series
KX-TDA Series
* In Normal Mode, you should change
the default setting for Message button.
(See page 5.)
If the handset has been replaced, just go off-hook.
KX-TDA Series

Desired Function Operation
Paging
Announce.
All extensions & external speakers
All external speakers
To answer a page
To page
Lock
Useful Features
desired phone no.
Three-party
Conference
During a conversation
Locking your
extension
lock code lock code
All extensions
Group
group no.
paging group no.
lock code
Unlock
Lock
Unlock
extension PIN
Announce.
You can make a voice announcement to extensions or external speakers or both
in the preset group simultaneously.
Features List
– 4 –
KX-TDA Series
KX-TE Series
KX-TE Series
KX-TDA Series
KX-TE Series
KX-TDA Series

– 5 –
Regarding other operations, please refer to the manuals
for the Panasonic KX series Business Telephone Systems
to which you are connected.
Setting Lock/Unlock
desired no.
(max. 24 digits)
You can lock the settings for one-touch buttons and MESSAGE button. [Default: Unlock]
To lock
To unlock
You can change the feature access number for the MESSAGE Button. [Default: 702]
For more detail, refer to the manual for the connected Panasonic KX series Business
Telephone Systems.
One-touch buttons
Personal Speed Dialling
Five One-touch buttons can be used as speed dialling buttons or to access features.
You can store Personal speed dial numbers up to 10 for KX-TE Series,
and up to 100 for KX-TDA Series(Default: 10).
MESSAGE Button
Confirmation in Programming Mode
When programming, you can confirm your entry by three types of beep sound.
• One long beep: Your entry is accepted.
• Two beeps: Your entry is same as a previous entry.
• Three beeps: Your entry is rejected.
Memory Back Up
If the telephone line is disconnected for more than three days, the stored numbers
for One-touch dialling and Speed dialling will be erased. Please store them again.
Also, the settings for MESSAGE and Flash time will return to the default settings.
selection no.
1: 80 ms, 2: 90 ms, 3: 100 ms,
4: 110 ms
Flash Time
Operations in NORMAL Mode
Before programming the length of Flash time, make sure the position of the Mode
switch lever is "NORMAL". Enter the appropriate selection number for your country.
[Default: 100 ms]

Confirming the Mode
Adjusting the RINGER Volume
Adjust the RINGER volume selector lever (at the bottom of the unit) to
the desired setting. ( – LOW, – MIDDLE, – HIGH)
[Default: MIDDLE]
You can confirm the current mode by the position of the Mode switch
lever (at the bottom of the unit). [Default: NORMAL]
PAUSE: Used to insert a pause when
storing a telephone number.
AUTO: Used for Personal Speed dialling.
PROGRAM: Used to enter the
programming mode.
MESSAGE: Used to call back the party who left the message
waiting indication.
Handset Volume Control Buttons: Used to adjust the handset volume.
One-touch Buttons (M1-M5): Used to
access a feature or as a speed dialling
button.
FLASH/RECALL: Used to send a recall signal in order to access a
PBX feature (e.g., Hold, Transfer, or Three-party Conference).
REDIAL: Used to redial the last dialled number.
8
7
6
5
4
3
2
1
PBX mode NORMAL mode
Connecting a Communication Device
Telephone Card: Has two sides (NORMAL mode, PBX mode).
DATA PORT
To connect a communication device such as a computer modem
to the telephone line, please use the DATA PORT (at the right
side of the unit). RJ11 modular jack is available.
PBX ModeNORMAL Mode
Message/Ringer Lamp: Flashes when you receive a call or when
someone has left you a message.
One-touch Buttons
(1-8): Used as preset
feature buttons set at
the
Panasonic KX series
Business Telephone
Systems
; you do not
need to program at your
extension.
The KX-T7710 has two modes, NORMAL Mode and Panasonic PBX Mode*.
Please use the corresponding side of the Telephone Card depending on the mode.
*The PBX Mode may not be available depending on the model of the Panasonic KX series Business
Telephone Systems to which you are connected.
For more detail, please consult your dealer.
Location of Controls
– 6 –

Removing the Telephone Card Cover
Telephone
line cord
Wall
mounting
adaptor
12
3
To temporarily
place the handset
down during a
conversation:
Wall Mounting
12
Things You Should Know
– 7 –
This product is intended to be connected to Panasonic KX series Business Telephone
Systems only.
We, Panasonic Communications Co., Ltd., declare that this equipment is in compliance with
the essential requirements and other relevant provisions of Directive 1999/5/EC.
If you want to get a copy of the original Declaration of Conformity of our products which
relates to the R&TTE, please use our web site: http://doc.panasonic.de
83 mm

PSQW2002YA-BM KK0103DH1026 (E)