ParaBody 359101 User manual

359101 50 LB. ADD-ON KIT
Part # 6827301 Revision: 3/30/991
ASSEMBLY INSTRUCTIONS

2
PARTS LIST
PART #
6284501
6382301
KEY
1
2
QTY
1
1
KEY
3
4
PART #
6198501
6214501
DESCRIPTION
WEIGHTSTACKLABEL(1-25)
WEIGHTPLATES
QTY
1
5
DESCRIPTION
20HOLEWEIGHTSTACKSHAFT
WEIGHTPLATEBUSHING10CT
STEP1:
• Snap twoWEIGHT PLATE BUSHINGS(3) into the top of all five WEIGHTPLATES (6) as shown in FIGURE 1.
FIGURE 1
2
4

3
FIGURE 2
STEP2:
TOPBOOMorGUIDE RODSUPPORT
• Remove theWEIGHTSTACK SELECTORPINfrom theWEIGHTSTACK as shownin FIGURE2.
• Unthreadthe CABLE fromthe WEIGHTSTACK SHAFTof the HEAD PLATE asshown in FIGURE 2.
• Removeor loosen theTOPBOOMor GUIDE RODSUPPORT. (Refer toHome Gym instructions)
• Tiltthe GUIDERODS backand removethe HEADPLATEASSEMBLY,fifteen WEIGHTPLATES,twoWEIGHTSTACK CUSHIONS,
two3/4” WASHERS,andtwoWEIGHTSTACKSPACERSas shown inFIGURE 1.(NOTE: Pleasediscardthe two3/4”WASHERS,
andthetwoWEIGHTSTACKSPACERS.)
• Unboltthe oldWEIGHTSTACKSHAFTfromthe HEADPLATE.(NOTE: Pleasediscard theoldWEIGHTSTACKSHAFT.)
HEADPLATE
GUIDEROD
WEIGHTSTACKSHAFT
WEIGHTSTACKPIN
WEIGHTPLATE
WEIGHTSTACKCUSHION
3/4”WASHER
WEIGHTSTACKSPACER
0123456
1/2 1/2 1/2 1/2 1/2 1/2

4
STEP4:
FIGURE 3
HEADPLATE
• SECURELYassemblethe20HOLEWEIGHTSTACKSHAFT
(1)totheHEADPLATE. (NOTE:TheboltholeintheHEAD
PLATEshouldbeontop.)
• Attach the WEIGHTSTACK LABELS (3) (#16-20) to the
fiveWEIGHTPLATES(4) as shownon FIGURE 3.
• Insert the two GUIDE RODS through the two WEIGHT
STACK CUSHIONS into the base as shown in FIGURE 3.
LubricatetheGUIDERODSwitha siliconor teflon
spraythat isavailableat mosthardware stores.
• USING EXTREME CARE, slide the five new WEIGHT
PLATES (4) and the previous fifteen WEIGHT PLATES
down over the GUIDE RODS onto the WEIGHT STACK
CUSHIONS. (NOTE:Make sure that thekeyholesof the
WEIGHTPLATESallfacethesameway.)
• Carefully Slide the new HEAD PLATEASSEMBLY down
over the GUIDE RODS onto the weight stack as shown in
FIGURE3.
GUIDEROD
WEIGHT
STACK
CUSHION
Thankyou forpurchasingtheParabody 35910150LB.ADD-ONKIT. Ifunsureofproperuse ofequipment,callyourlocal
LifeFitness distributoror calltheParabody customerservicedepartment at(800)328-9714.
4
3
• Screw the CABLE into the WEIGHTSTACK SHAFT of the
HEAD PLATE until the CABLE slightly pulls on the HEAD
PLATE.
• TIGHTENjamnutsecurely!
1
• SECURELYtighten all loose connections.