Paradox DGP-LSN4 V1.1 Operating instructions

Section [001] : Substation 1 Partition Assignment
Option OFF ON
[1] Partition 1 NDisabled UEnabled
[2] Partition 2 NDisabled UEnabled
[3] Partition 3 NDisabled UEnabled
[4] Partition 4 NDisabled UEnabled
[5] Partition 5 NDisabled UEnabled
[6] Partition 6 NDisabled UEnabled
[7] Partition 7 NDisabled UEnabled
[8] Partition 8 NDisabled UEnabled
Section [002] : Substation 2 Partition Assignment
Option OFF ON
[1] Partition 1 NDisabled UEnabled
[2] Partition 2 NDisabled UEnabled
[3] Partition 3 NDisabled UEnabled
[4] Partition 4 NDisabled UEnabled
[5] Partition 5 NDisabled UEnabled
[6] Partition 6 NDisabled UEnabled
[7] Partition 7 NDisabled UEnabled
[8] Partition 8 NDisabled UEnabled
Section [003] : Substation 3 Partition Assignment
Option OFF ON
[1] Partition 1 NDisabled UEnabled
[2] Partition 2 NDisabled UEnabled
[3] Partition 3 NDisabled UEnabled
[4] Partition 4 NDisabled UEnabled
[5] Partition 5 NDisabled UEnabled
[6] Partition 6 NDisabled UEnabled
[7] Partition 7 NDisabled UEnabled
[8] Partition 8 NDisabled UEnabled
paradox.com
Printed in Canada- 12/2007
DGPLSN4-EP02
Listen-In Module
DGP-LSN4 V1.1
Programming Guide
Section [004] : Substation 4 Partition Assignment
Option OFF ON
[1] Partition 1 NDisabled UEnabled
[2] Partition 2 NDisabled UEnabled
[3] Partition 3 NDisabled UEnabled
[4] Partition 4 NDisabled UEnabled
[5] Partition 5 NDisabled UEnabled
[6] Partition 6 NDisabled UEnabled
[7] Partition 7 NDisabled UEnabled
[8] Partition 8 NDisabled UEnabled
Section [005] : General Options1
Option OFF ON
[1] Module Tamper Input UDisabled NEnabled
[2] Telephone Line Monitoring UDisabled NEnabled
[3] Volume Bypass NDisabled UEnabled
[4] Continuous Recording UDisabled NEnabled
[5] Bypass Siren on Communication NDisabled UEnabled
[6] Locate Feedback on Substations UDisabled NEnabled
[7] Response Connection Code UDirect NPress *
[8] Call Back Connection NDisabled UEnabled
Section [006] : General Options 2
Option OFF ON
[1] Substation 1 Anti-tamper Switch UDisabled NEnabled
[2] Substation 2 Anti-tamper Switch UDisabled NEnabled
[3] Substation 3 Anti-tamper Switch UDisabled NEnabled
[4] Substation 4 Anti-tamper Switch UDisabled NEnabled
[5] Background Music Input UDisabled NEnabled
[6] User Phoneline Menu Selection UUser NMonitoring
[7] Monitoring Station Phoneline Menu
Selection NUser U
Monitoring
[8] User Phoneline Default Menu NArm/
Disarm UListen-In
Section [007] :Connection Options 1
Option OFF ON
[1] Zone Alarm starts Listen-in Mode NDisabled UEnabled
[2] Fire Alarm starts Listen-in Mode NDisabled UEnabled
[3] Duress Alarm starts Listen-in Mode NDisabled UEnabled
[4] Panic Police starts Listen-in Mode NDisabled UEnabled
[5] Panic Medical starts Listen-in Mode NDisabled UEnabled
[6] Panic Fire starts Listen-in Mode NDisabled UEnabled
[7] Zone Tamper starts Listen-in Mode UDisabled NEnabled
[8] Zone Supervision starts Listen-in Mode UDisabled NEnabled
Section [008] : Connection Options 2
Option OFF ON
[1] Zone Fire Loop Trouble starts Listen-In
Mode
UDisabled NEnabled
[2] Module Tamper starts Listen-in Mode UDisabled NEnabled
[3] Door Force Alarm starts Listen-In
Mode
UDisabled NEnabled
[4] Bus Fault starts Listen-in Mode UDisabled NEnabled
[5] Police Code starts Listen-In Mode UDisabled NEnabled
[6] - [8] Future use NN/A NN/A
Section [009] : Substation 1 Page Options
Option OFF ON
[1] N/A NN/A NN/A
[2] Substation 1 can page Substation 2 NDisabled UEnabled
[3] Substation 1 can page Substation 3 NDisabled UEnabled
[4] Substation 1 can page Substation 4 NDisabled UEnabled
[5] - [8] Future Use NN/A NN/A
Section [010] : Substation 2 Page Options
Option OFF ON
[1] Substation 2 can page Substation 1 NDisabled UEnabled
[2] N/A NN/A NN/A
[3] Substation 2 can page Substation 3 NDisabled UEnabled
[4] Substation 2 can page Substation 4 NDisabled UEnabled
[5] - [8] Future Use NN/A NN/A
Section [011] : Substation 3 Page Options
Option OFF ON
[1] Substation 3 can page Substation 1 NDisabled UEnabled
[2] Substation 3 can page Substation 2 NDisabled UEnabled
[3] Future Use NN/A NN/A
[4] Substation 3 can page Substation 4 NDisabled UEnabled
[5] - [8] Future Use NN/A NN/A
Section [012] : Substation 4 Page Options
Option OFF ON
[1] Substation 4 can page Substation 1 NDisabled UEnabled
[2] Substation 4 can page Substation 2 NDisabled UEnabled
[3] Substation 4 can page Substation 3 NDisabled UEnabled
[4] - [8] Future Use NN/A NN/A
Section [013] : Substation Panic Button Options
Option OFF ON
[1] & [2] Nsee table
Nsee table
Nsee table
Nsee table
[3] & [4] Nsee table
Nsee table
Nsee table
Nsee table
[5] & [6] Nsee table
Nsee table
Nsee table
Nsee table
[7] & [8] Nsee table
Nsee table
Nsee table
Nsee table
Substation 1
Panic Button Options
[1] [2]
OFF OFF Disabled (default)
ON OFF Police panic
OFF ON Medical panic
ON ON Fire panic
Substation 2
Panic Button Options
[3] [4]
OFF OFF Disabled (default)
ON OFF Police panic
OFF ON Medical panic
ON ON Fire panic
Substation 3
Panic Button Options
[5] [6]
OFF OFF Disabled (default)
ON OFF Police panic
OFF ON Medical panic
ON ON Fire panic
Substation 4
Panic Button Options
[7] [8]
OFF OFF Disabled (default)
ON OFF Police panic
OFF ON Medical panic
ON ON Fire panic
Section [014] : Substation Panic Audible Feedback
Option OFF ON
[1] Substation 1 Panic audible feedback UDisabled NEnabled
[2] Substation 2 Panic audible feedback UDisabled NEnabled
[3] Substation 3 Panic audible feedback UDisabled NEnabled
[4] Substation 4 Panic audible feedback UDisabled NEnabled
[5] - [8] Future Use NN/A NN/A
Section [015] : Audio Message Options 1
Option OFF ON
[1] Audio Message on Exit Delay NDisabled UEnabled
[2] Audio Message on Arming NDisabled UEnabled
[3] Audio Message on Disarming NDisabled UEnabled
[4] Audio Message on Entry Delay NDisabled UEnabled
[5] Welcome Audio Message UDisabled NEnabled
[6] Goodbye Audio Message UDisabled NEnabled
[7] Audio Message on System Trouble UDisabled NEnabled
[8] Installer In/Out Audio Message UDisabled NEnabled
Section [016] : Audio Message Options 2
Option OFF ON
[1] Music ON/OFF audio message UDisabled NEnabled
[2] Personal recording ON/OFF audio
message
UDisabled NEnabled
[3] Play “Armed” messages on Stay/
Instant arming
UDisabled NEnabled
[4] Listen-In On/Off audio message UDisabled NEnabled
[5] Future Use NN/A NN/A
[6] New alarm message (alarm in same
partition) NBeep UVo i c e
[7] New alarm report message (alarm in
other partition) NBeep UVoice
[8] To begin, enter account code message NBeep UVoice
Section [017] : Personalized Partition Audio Labels
Option OFF ON
[1] Partition 1’s audio label UDefault NPersonal
[2] Partition 2’s audio label UDefault NPersonal
[3] Partition 3’s audio label UDefault NPersonal
[4] Partition 4’s audio label UDefault NPersonal
[5] Partition 5’s audio label UDefault NPersonal
[6] Partition 6’s audio label UDefault NPersonal
[7] Partition 7’s audio label UDefault NPersonal
[8] Partition 8’s audio label UDefault NPersonal
Section [018] : Personalized User Audio Labels
Option OFF ON
[1] Master’s audio label UDefault NPersonal
[2] User 2’s audio label UDefault NPersonal
[3] User 3’s audio label UDefault NPersonal
[4] User 4’s audio label UDefault NPersonal
[5] User 5’s audio label UDefault NPersonal
[6] User 6’s audio label UDefault NPersonal
[7] User 7’s audio label UDefault NPersonal
[8] User 8’s audio label UDefault NPersonal

* The total of section [035] and [036] must be equal to or less than 120 seconds.
Section [019] : Personalized Audio Labels
Option OFF ON
[1] System’s Audio Label UDefault NPersonal
[2] Alarm message UDefault NPersonal
[3] Fire alarm message UDefault NPersonal
[4] - [8] Future Use NN/A NN/A
Section [020] : Substation 1 Partition Status
Option OFF ON
[1] Plays status of Partition 1 NDisabled UEnabled
[2] Plays status of Partition 2 NDisabled UEnabled
[3] Plays status of Partition 3 NDisabled UEnabled
[4] Plays status of Partition 4 NDisabled UEnabled
[5] Plays status of Partition 5 NDisabled UEnabled
[6] Plays status of Partition 6 NDisabled UEnabled
[7] Plays status of Partition 7 NDisabled UEnabled
[8] Plays status of Partition 8 NDisabled UEnabled
Section [021] : Substation 2 Partition Status
Option OFF ON
[1] Plays status of Partition 1 NDisabled UEnabled
[2] Plays status of Partition 2 NDisabled UEnabled
[3] Plays status of Partition 3 NDisabled UEnabled
[4] Plays status of Partition 4 NDisabled UEnabled
[5] Plays status of Partition 5 NDisabled UEnabled
[6] Plays status of Partition 6 NDisabled UEnabled
[7] Plays status of Partition 7 NDisabled UEnabled
[8] Plays status of Partition 8 NDisabled UEnabled
Section [022] : Substation 3 Partition Status
Option OFF ON
[1] Plays status of Partition 1 NDisabled UEnabled
[2] Plays status of Partition 2 NDisabled UEnabled
[3] Plays status of Partition 3 NDisabled UEnabled
[4] Plays status of Partition 4 NDisabled UEnabled
[5] Plays status of Partition 5 NDisabled UEnabled
[6] Plays status of Partition 6 NDisabled UEnabled
[7] Plays status of Partition 7 NDisabled UEnabled
[8] Plays status of Partition 8 NDisabled UEnabled
Section [023] : Substation 4 Partition Status
Option OFF ON
[1] Plays status of Partition 1 NDisabled UEnabled
[2] Plays status of Partition 2 NDisabled UEnabled
[3] Plays status of Partition 3 NDisabled UEnabled
[4] Plays status of Partition 4 NDisabled UEnabled
[5] Plays status of Partition 5 NDisabled UEnabled
[6] Plays status of Partition 6 NDisabled UEnabled
[7] Plays status of Partition 7 NDisabled UEnabled
[8] Plays status of Partition 8 NDisabled UEnabled
Section Data
[024] User Connection Access
__/__/__ (000 to 255, 000 = All users, 001 = Master/User 1)
Default: 001
[025] Ring Counter
__/__/__ (000 to 032 x 1 ring, 000 = disabled)
Default: 006
[026] Answering Machine Override Delay
__/__/__ (000 to 255 x 1 second, 000 = disabled)
Default: 030
[027] TLM Fail Timer
__/__/__ (000 to 255 x 1 second, 000 = instant)
Default: 030
[028] Call Back Connection delay
__/__/__ (001 to 030 x 1 minute)
Default: 005
[029] Future Use
[030] Connection Message Repeat Delay
__/__/__ (005 to 255 x 1 second)
Default: 030
[031] Alarm Message Repeat Delay
__/__/__ (005 to 255 x 1 second)
Default: 020
[032] Fire Alarm Message Repeat Delay
__/__/__ (005 to 255 x 1 second)
Default: 020
[033] Response Connection Code Entry Delay
__/__/__ (010 to 060 x 1 second)
Default: 020
[034] Call Back Connection Code Entry Delay
__/__/__ (020 to 060 x 1 second)
Default: 020
[035] Pre-Alarm Audio Recording*
__/__/__ (005 to 115 x 1 second)
Default: 015
[036] Post-Alarm Audio Recording*
__/__/__ (005 to 115 x 1 second)
Default: 015
[037] Call Back Connection access code
__/__/__/__/__/__ (Default: 000000)
Section [038] : Substation 1 Mute Schedule
Schedule Start Time End Time Day (1 to 8)
A__ __ / __ __ __ __ / __ __ S M T W T F S H
B__ __ / __ __ __ __ / __ __ S M T W T F S H
Section [039] : Substation 2 Mute Schedule
Schedule Start Time End Time Day (1 to 8)
A__ __ / __ __ __ __ / __ __ S M T W T F S H
B__ __ / __ __ __ __ / __ __ S M T W T F S H
Section [040] : Substation 3 Mute Schedule
Schedule Start Time End Time Day (1 to 8)
A__ __ / __ __ __ __ / __ __ S M T W T F S H
B__ __ / __ __ __ __ / __ __ S M T W T F S H
Using the Memory Key (PMC5)
Download PMC5 Contents to the Listen-In Module
1. Insert the Memory Key onto the Listen-In Module’s connector labelled “MEM
KEY”.
2. To download the contents of the Memory Key, enter the Listen-In Module’s
programming mode and enter section [100].
3. Once the keypad emits a confirmation beep, wait for a second confirmation
beep and then remove the Memory Key.
Copy Listen-In Module Contents to PMC5
1. Insert Memory Key onto the Listen-In Module’s connector labelled “MEM
KEY”. Ensure that the write protect jumper is on (refer to Memory Key
(PMC5) below).
2) To copy the contents to the Memory Key, enter the Listen-In Module’s
programming mode and enter section [110].
3. Once the keypad emits a confirmation beep, wait for a second confirmation
beep and then remove the Memory Key. Remove the Memory Key’s jumper
if you do not wish to accidentally overwrite its contents.
The PMC5, PMC-4 and PMC-3 memory keys will both work with the
DGP-LSN4 module.
Combus Voltmeter
To verify if the combus is supplying sufficient power, enter the Listen-In module
programming mode and enter section [050]. A reading of 12V or lower indicates
that the voltage is too low. The voltage may drop during the control panel or
external power supply battery test. Press enter to refresh display.
Warranty
For complete warranty information on this product please refer to the Limited Warranty
Statement found on the website www.paradox.com/terms. Your use of the Paradox product
signifies your acceptance of all warranty terms and conditions.
© 2007-2008 Paradox Security Systems Ltd. All rights reserved. Specifications may change
without prior notice. One or more of the following US patents may apply: 7046142, 6215399,
6111256, 6104319, 5920259, 5886632, 5721542, 5287111, 5119069, 5077549 and
RE39406 and other pending patents may apply. Canadian and international patents may also
apply.
Digiplex and Digiplex EVO are trademarks or registered trademarks of Paradox Security
Systems Ltd. or its affiliates in Canada, the United States and/or other countries. For the latest
information on products approvals, such as UL and CE, please visit www.paradox.com.
Section [041] : Substation 4 Mute Schedule
Schedule Start Time End Time Day (1 to 8)
A__ __ / __ __ __ __ / __ __ S M T W T F S H
B__ __ / __ __ __ __ / __ __ S M T W T F S H
Section Description
[060] Siren Bypass Relay Test: Activates the relay for 8 seconds
[061] Phone Line Relay Test: Activates the relay for 8 seconds
Section Description
[100] Download programming from the Memory Key to the Listen-In
Module
[110] Copy programming from the Listen-In Module to the Memory Key
Figure 2
Partial View of EVO96
Control Panel
Listen-In Module
DGP-LSN4
Siren
from
external
phone line
if not using an
external power
supply for the
DGP-LSN4,
connect this to
the RED BUS
on the
DGP-LSN4. External Power Supply
N.O.
switch
Memory Key
Reset Jumper
volume
control dial
anti-tamper
switch
Firmware Upgrade
Service Keypad
Ground
clamp
Cold water pipe
grounding
CAT-5 cable (4 twisted pair) Max
152m (500ft)
Use one pair for the SP
connections another for the MK
connections, and two pairs for
the AUX connections.
Listen-In
Substation #1
DGP-SUB1
buzzer
Background Music Input