Paradox APR3-ZX4 Operating instructions

Digiplex & DigiplexNE - 1 - Modules Programming Guide
4-zone Expansion Module
* For the Base Time, using Level Programming (refer to page 1), press the and buttons to select a value from 000 to 002 and then press
[ENTER]. Base Time Multipliers: 000 = 15 ms, 001 = 1 second, 002 = 1 minute.
U= Default setting
SECTION [001] : General Options
Option OFF ON
[1] Tamper Recognition
ON = Input 4 (Z4) becomes tamper input
UDisabled NEnabled
[2] to [8] Future Use NN/A NN/A
Input Speed Base Time (000-002)* Time Value (000-255) Default
Input 001 [002] ___/___/___ [003] ___/___/___ 600ms
Input 002 [004] ___/___/___ [005] ___/___/___ 600ms
Input 003 [006] ___/___/___ [007] ___/___/___ 600ms
Input 004 [008] ___/___/___ [009] ___/___/___ 600ms
Input 005 (ATZ of Input 001) [010] ___/___/___ [011] ___/___/___ 600ms
Input 006 (ATZ of Input 002) [012] ___/___/___ [013] ___/___/___ 600ms
Input 007 (ATZ of Input 003) [014] ___/___/___ [015] ___/___/___ 600ms
Input 008 (ATZ of Input 004) [016] ___/___/___ [017] ___/___/___ 600ms
APR3-ZX4

Digiplex & DigiplexNE - 2 - Modules Programming Guide
Module Connection Drawings
MODULE CONNECTION OVERVIEW

Digiplex & DigiplexNE - 3 - Modules Programming Guide
1-PGM EXPANSION MODULE (APR3-PGM1)
8-ZONE EXPANSION MODULE (APR3-ZX8)
4-ZONE EXPANSION MODULE (APR3-ZX4)
ONE-ZONE EXPANSION MODULE (DGP2-ZX1)
Refer to Module Connection Overview on page 29 for
information on how to connect the 1-PGM Output Module to the
combus (Figure 1) and how to connect its PGM output (Figure
2). Before commencing with the connections, please read the
General Warnings listed on page 29.
For information on the 1-PGM Output
Module’s LEDs, refer to Module LED
Indications on page 29.
For information on the 8-
zone Hardwire Module’s
LEDs, refer to Module
LED Indications on
page 29.
Refer to Module Connection Overview on
page 29 for information on how to connect the
8-zone Hardwire Module to the combus
(Figure 1) and how to connect its PGM output
(Figure 3). Before commencing with the
connections, please read the General
Warnings listed on page 29.
For information on the 4-zone Hardwire
Module’s LEDs, refer to Module LED
Indications on page 29.
Refer to Module Connection Overview on page 29
for information on how to connect the 4-zone
Hardwire Module to the combus (Figure 1). Before
commencing with the connections, please read the
General Warnings listed on page 29.
For information on the One-
zone Hardwire Module’s
LEDs, refer to Module LED
Indications on page 29.
Refer to Module Connection Overview on
page 29 for information on how to connect the
One-zone Hardwire Module to the combus
(Figure 1). Before commencing with the
connections, please read the General Warnings
listed on page 29.

PRINTED IN CANADA 12/2003 APR3ZX4_MODULES-EP08