Paradox Magellan K636 User manual

K636 - User’s Quick Reference Guide
KEYPAD OVERVIEW
StayD Light (green)
On = StayD on
Off = StayD off
Off Light (red)
On = Disarmed
Off = System armed
AC Light (orange)
On = Power on
Off = Power off
= Press once +
[MASTER CODE]for Quick
Menu Programming.
Keys
[TBL]Trouble display
On = Trouble(s) occurring
[MEM]Alarm memory display
On = Alarm(s) occurred
[BYP]Bypass programming
On = Zone(s) bypassed
[ARM], [SLEEP], [STAY]:
On = System Armed
Off = Zone disarmed
Flash = Exit Delay
Fast = Exit Delay (final 10 sec.)
Flash* or zone in alarm
* Audible Indicators:
Continuous beep = Alarm
Variable beep = Fire alarm
Intermittent beep = Beginning of
exit delay
Fast beep = Final 10 sec. of
exit delay
Zone Display:
Key lit [1] to [0(10)]
correspond to zones 1 to
10 respectively.
Key Lit = Open or
Entry delay
Key Flash = In alarm or
Tamper
To Regular Arm:
1. Close all opened zones.
2. Press [ARM].
3. Enter your [ACCESS CODE].
To Stay Arm:
1. Press the [STAY]key.
2. Enter your [ACCESS CODE].
To Sleep Arm:
1. Press the [SLEEP]key.
2. Enter your [ACCESS CODE].
ARMING AND DISARMING
TO ARM
WHEN LEAVING...
TO ARM
WHEN STAYING...
To Disarm: [OFF] +[ACCESS CODE]

To send an audible alarm to your Security
Company, press and hold one of the button
combinations listed for 3 seconds.
When a trouble condition occurs, the [TBL]
key will illuminate.
1. Press the [TBL] key. The key will flash
and number(s) corresponding to the
trouble(s) will illuminate.
2. Read the corresponding explanation
from the trouble list in the Esprit E55
User Guide.
3. Press the [CLEAR] key to exit.
To view the alarms that occurred during the
last armed period:
1. Disarm the system.
2. Press the [MEM] key.
3. The corresponding zone numbers
that were in alarm the last time the
system was armed will illuminate.
4. Press the [CLEAR] key to exit.
To mute the keypad:
Press and hold the [CLEAR]key for 6
seconds to enable or disable Keypad
Muting.
To modify the backlight:
1. Press and hold the [MEM]key for 3
seconds.
2. The [MEM]key will illuminate.
3. Press the [MEM]key to set the desired
backlight level.
4. Press [CLEAR] twice to exit.
PANIC ALARMS
Panic Alarm Type Button
Combinations
Police
Medical
Fire
Press [1] & [3]
Press [4] & [6]
Press [7] & [9]
TROUBLE DISPLAY
ALARM MEMORY DISPLAY
KEYPAD SETTINGS
Bypassed zones remained unarmed when
the system is armed.
1. Press the [BYP] key.
2. Enter your [ACCESS CODE].
3. The corresponding key of all open
zones will illuminate. Select the
zone(s) you want to bypass by
entering the one-digit zone number.
The zone key will flash.
4. Press the [ENTER]key to save and
exit.
A Chime Enabled zone will advise you every
time it is opened by causing your keypad to
beep.
1. Press & hold the corresponding zone
key for 3 seconds (Accept beep =
Chime enabled, Fail beep = Chime
disabled).
BYPASS PROGRAMMING CHIME PROGRAMMING
© Paradox Security Systems Ltd., 2008. Esprit
E55 is a trademark or registered trademark of
Paradox Security Systems Ltd. and its affiliates
in Canada, the United States and/or other
countries. All rights reserved.
Printed in Canada 02/2008 PARADOX.COM K636-EQ00