Paradox Grafica DNE-K07 Operating instructions

Digiplex & DigiplexNE - 1- Modules Programming Guide
Grafica Graphic LCD Keypad Module
Grafica Keypads can be used with DGP-848 and DGP-NE96 control panels only. Grafica will not function with DGP-48 control panels.
The keypad’s serial number can be found on the keypad’s PC board. The keypad’s serial number can also be viewed by pressing and holding the [0] key,
entering the [INSTALLER CODE] and then entering section [000].
U= Default setting
USING THE MEMORY KEY
Download Contents of the Memory Key to the Grafica Keypad.
1) Insert the Memory Key onto the keypad’s connector (refer to “Memory Key Connector” on page 4).
2) To download the contents of the Memory Key, enter the keypad’s programming mode and enter section [100].
3) Once the keypad emits a confirmation beep, wait for a second confirmation beep and then remove the Memory Key.
SECTION [001] : Keypad Partition Assignment SECTION [002] : System Options
Option OFF ON Option OFF ON
[1] Partition 1 NDisabled UEnabled [1] Display Code Entry UDisabled N Enabled
[2] Partition 2 NDisabled UEnabled [2] Display Exit Delay N Disabled UEnabled
[3] Partition 3 NDisabled UEnabled [3] Display Entry Delay N Disabled UEnabled
[4] Partition 4 NDisabled UEnabled [4] Confidential Mode
(not for UL installations) UDisabled NEnabled
[5] Partition 5 (DGP-NE96 only) NDisabled UEnabled [5] To exit Confidential Mode U
Enter code
N Press Button
[6] Partition 6 (DGP-NE96 only) NDisabled UEnabled [6] Exit Delay Beep N Disabled UEnabled
[7] Partition 7 (DGP-NE96 only) NDisabled UEnabled [7] Future Use NN/A NN/A
[8] Partition 8 (DGP-NE96 only) NDisabled UEnabled [8] Keypad Tamper UDisabled NEnabled
SECTION [003] : Beep on Trouble
Option OFF ON
[1] System & Clock Trouble Beep UDisabled NEnabled
[2] Communicator Trouble Beep UDisabled NEnabled
[3] Module & Combus Trouble Beep UDisabled NEnabled
[4] All Zone Trouble Beep UDisabled NEnabled
[5] to [8] Future Use NN/A NN/A
Section #
[004] Confidential Mode Timer
___/___/___ (005 to 255 seconds; Default: 120 seconds)
[100] Download all from the Memory Key (Grafica keypad sections [001] to [004] and all user, zone, door and area labels) to the Grafica keypad.
[110] Copy the Grafica keypad sections [001] to [004] and all user, zone, door and area labels to the Memory Key.
DNE-K07

Digiplex & DigiplexNE - 2 - Modules Programming Guide
Copy Contents of the Grafica Keypad to the Memory Key.
1) Insert the Memory Key onto the keypad’s connector (refer to “Memory Key Connector” on page 4). Ensure that the write protect jumper is on (refer to
"Memory Key (PMC-3)" below).
2) To copy the contents to the Memory Key, enter the keypad’s programming mode and enter section [110].
3) Once the keypad emits a confirmation beep, wait for a second confirmation beep and then remove the Memory Key. Remove the Memory Key’s jumper
if you do not wish to accidentally overwrite its contents.
MEMORY KEY CONNECTOR
MEMORY KEY (PMC-3)
The memory key will only function with a keypad that has the DGP2 or DNE prefix in the model number. Only the PMC-3 memory key will
function with DGP2 and DNE keypads.
PMC-3
Jumper ON:
Can copy and download
contents.
Jumper OFF:
Cannot override the contents
of the memory key.

Digiplex & DigiplexNE - 3- Modules Programming Guide
Module Connection Drawings
MODULE CONNECTION OVERVIEW

Digiplex & DigiplexNE - 4- Modules Programming Guide
GRAFICA GRAPHIC LCD KEYPAD MODULE (DNE-K07)

PRINTED IN CANADA 12/2003 DNEK07_MODULES-EP08