Paramount Fitness RetroJet User manual

Use removal tool made for exist-
ing nozzle to remove one nozzle
at a time by rotation 1/4 turn
counter clockwise to unlock.
The system is hydraulically bal-
anced, so the same size nozzle
needs to go back into the ap-
propriate hole.
Use removal tool made for exist-
ing nozzle to remove one nozzle
at a time by rotation 1/4 turn
counter clockwise to unlock.
The system is hydraulically bal-
anced, so the same size nozzle
needs to go back into the ap-
propriate hole.
Check the size of the opening
on the existing nozzle and then
select the closest RetroJet cap
from the pack of three provid-
ed in the replacement kit.
Check the size of the opening
on the existing nozzle and then
select the closest RetroJet cap
from the pack of three provid-
ed in the replacement kit.
For Net’n’Clean
T M
For A&A Gamma 3
®
T M
For A&A Quikclean 2
®
T M
For A&A Quikclean 1
®
T M
For Caretaker 99 Threaded
®
T M
T M
For Caretaker 99
®
UNIVERSAL IN-FLOOR NOZ ZLE REPLACEMENTS
T M
For Net’n’Clean
T M
For A&A Gamma 3
®
T M
For A&A Quikclean 2
®
T M
For A&A Quikclean 1
®
T M
For Caretaker 99 Threaded
®
T M
T M
For Caretaker 99
®
UNIVERSAL IN-FLOOR NOZ ZLE REPLACEMENTS
T M
This installation guide walks you
through the steps involved in re-
moving an existing cleaning nozzle
and properly installing a new Ret-
rojet.
For technical assistance call
1.800.621.5886 or contact your
regional representative
This installation guide walks you
through the steps involved in re-
moving an existing cleaning nozzle
and properly installing a new Ret-
rojet.
For technical assistance call
1.800.621.5886 or contact your
regional representative
For replacing: A&A Quikclean1, A&A Quikclean2, A&A Quikclean Gamma 3,
Caretaker 99, Caretaker 99 Threaded, Net’N’Clean and Pool Valet
For replacing: A&A Quikclean1, A&A Quikclean2, A&A Quikclean Gamma 3,
Caretaker 99, Caretaker 99 Threaded, Net’N’Clean and Pool Valet
1 1
2 2
RETROJET
INSTALLATION GUIDE
RETROJET
INSTALLATION GUIDE
www.1Paramount.com 1.800.621.5886 www.1Paramount.com 1.800.621.5886

Place the selected cap over the
the top of the RetroJet nozzle
and press firmly against a hard
surface. You will hear a snap
when the pieces have properly
locked together.
Place the selected cap over the
the top of the RetroJet nozzle
and press firmly against a hard
surface. You will hear a snap
when the pieces have properly
locked together.
Press the top of the complete
RetroJet nozzle onto the three
prongs of the RetroJet installa-
tion tool*. Guide the nozzle into
the hole in the pool floor and
then rotate clockwise 1/4 turn
to lock in place.
Press the top of the complete
RetroJet nozzle onto the three
prongs of the RetroJet installa-
tion tool*. Guide the nozzle into
the hole in the pool floor and
then rotate clockwise 1/4 turn
to lock in place.
Allow the nozzle to cycle
through the cleaning process
to ensure that it was installed
properly.
Allow the nozzle to cycle
through the cleaning process
to ensure that it was installed
properly.
3 3
4 4
5 5
www.1Paramount.com 1.800.621.5886 www.1Paramount.com 1.800.621.5886
004-027-8783-00 REV033010004-027-8783-00 REV033010