Notes on the Documents Supplied Hydraulics controller
6 192-121100 N6 June 2008
Contents
1. Notes on the Documents Supplied .........................................................3
1.1 C3 ServoManager..................................................................................... 4
2. Introduction...............................................................................................7
2.1 Device assignment Compax3 Fluid........................................................ 7
2.2 Type specification plate Compax3 Fluid................................................ 8
2.3 Packaging, transport, storage ................................................................ 9
2.4 Safety Instructions................................................................................. 10
2.4.1. General hazards................................................................................................... 10
2.4.2. Safety-conscious working .................................................................................. 10
2.4.3. Special safety instructions ................................................................................. 11
2.5 Warranty conditions .............................................................................. 11
2.6 Conditions of utilization for CE-conform operation............................ 12
3. Compax3F device description...............................................................13
3.1 State of delivery ..................................................................................... 13
3.2 Plug and connector assignment Compax3 Fluid ................................ 13
3.2.1. Meaning of the front panel LEDs (via X10)........................................................ 13
3.2.2. Plug and connector assignment ........................................................................ 14
3.2.3. Plug and connector assignment complete ....................................................... 15
3.2.4. Analog Input (plug X1) ........................................................................................ 16
3.2.4.1 Wiring of the analog inputs ....................................................................... 16
3.2.5. Analog Output (plug X2) ..................................................................................... 17
3.2.5.1 Wiring of analog outputs ........................................................................... 17
3.2.6. Voltage supply (plug X3)..................................................................................... 18
3.2.7. RS232 / RS485 interface (plug X10) ................................................................... 19
3.2.8. Analog / Encoder (plug X11)............................................................................... 20
3.2.8.1 Connections of the encoder interface....................................................... 20
3.2.9. Digital inputs/outputs (plug X12) ....................................................................... 21
3.2.9.1 Connection of the digital Outputs/Inputs................................................... 21
3.2.10. Feedback (connector X13).................................................................................. 22
3.2.10.1 Connections of the encoder interface....................................................... 22
3.2.11. Mounting and dimensions .................................................................................. 23
4. Specifications .........................................................................................24
5. Index ........................................................................................................28
