Parrot CK3100 LCD User manual

CLIO 2
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
binding.
Installation manual:
Parrot MKi + Parrot
CK3100 range
CLIO 2
The brand name RENAULT CLIO 2 and the RENAULT logo are the property of RENAULT.
This document is only valid for the vehicle model CLIO 2® year 1998 to 2006, excluding all other models in the same range and excluding later
modifications made to the vehicle by the manufacturer.
The Parrot brand name and logos are the exclusive property of Parrot SA.

CLIO 2
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
binding.
Accessories required
Disassembly
15min
Kit installation
20min
Refitting
15min
Testing
15min
Total
1h5min
YES
ACC wire
YES
ISO
N/A
UNIKA
FRONT SPEAKER
TEL mode
ALL
MUSIC mode
Fitting time / Main features
Tools
-TORX screwdriver
-Multimeter or Test lamp
-Hose clamp
- Electrical tape
-Strong adhesive (optional)
"Please contact your Wholesaler to purchase accessories.”
Updating
Plastic trim removal tools
FACOM / BERNER
FACOM DX-25 kit (n°4 tools)
To get the most out of your hands-free kit we recommend that you update your
software regularly. The update procedure can be found at
www.parrot.com/usa/support/downloads

CLIO 2
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
binding.
Disassembly
CLIO 2

CLIO 2
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
binding.
Disassembly 1 / 2
Insert the removal tools into the
slots on each side of the radio.
Carefully release the radio, without
pulling it out completely, so that
you can disconnect the connectors
and the antenna. Then completely
remove the radio.
Using the plastic trim tools,
unclip the Warning panel
without disconnecting it.
Remove screws 1, 2 and 3 under
the steering column and remove
the panel.
1
3
2
4
5 6
Using the plastic trim tools,
unclip the panel on the left-hand
side of the dashboard.
Remove the door seal on the
driver’s side.
CLIO 2
1
2
3

CLIO 2
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
binding.
Disassembly 2 / 2
Using the plastic trim tools, unclip
and open the cabin light without
disconnecting it.
7
CLIO 2

CLIO 2
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
binding.
Stick on the bracket provided after
cleaning the surface, sliding it on the
carpet under the cabin light panel.
Microphone passage
Run the microphone cable
through the side of the cabin light
panel.
Using a guide, feed the cable
from inside the cabin light panel
towards the windscreen. Run it
under the headliner.
Run the cable along the driver's side
windscreen support while replacing the
door seal.
1
3
2
4
5 6
Pass the cable into the
dashboard on the left side.
Run the cable under the steering
wheel panel towards the radio
housing, attaching with wire ties.
CLIO 2

CLIO 2
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
binding.
Feeding the accessory cable
On the top side of the glove box,
insert the cable into the hole.
Then bring it out leaving sufficient
length.
1 2
CLIO 2

CLIO 2
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
binding.
Fitting the hands-free system 1 / 2
Swap the fuses (red wire with orange wire) on
the kit connector provided. Then connect all of
the wires to the blue box as shown in the
diagram below.
1
ISO
adapter
2
Test the assembly before reassembly, then stow
the box under the radio housing.
CLIO 2

CLIO 2
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
binding.
Fitting the hands-free system 2 / 2
Pass the cable through the left-
hand button hole. (WARNING)
Clean the surface and stick the
support provided to the dashboard
in the top left-hand corner of the
air vent.
3 4
CLIO 2
Run the cable along the vent
join. (If necessary, stick it in
place using strong adhesive.)
Then clip the button surround back in
place (make sure that you DO NOT cut
the screen cable) and fit the screen.
5 6
!

CLIO 2
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
binding.
Testing
Before refitting the system, switch the kit on using the
ignition (or by starting the car). By pushing the central knob
of the remote control, check:
1 - That the menu is displayed on the screen. (language or
iPod.)
2 - That the system can be muted. (Click in the blue box.)
3 - That there is no sound coming from the speakers.
4 - That the sound from the voice menu is coming out of the
front speakers.
5 - Then turn off the ignition, check that the kit switches off
and that the "goodbye" message appears on the screen. (If
this fails, reverse the fuses on the kit's wiring harness.)
6 - Pair a telephone with the kit to make a call. (Check that
both the microphone and the kit are working.)
CLIO 2