Parrot CK3100 LCD User manual

This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
SANDERO
SANDERO
Installation manual:
Parrot MKi + Parrot
CK3100 range
The brand name DACIA SANDERO and the DACIA logo are the property of DACIA.
This document is only valid for the vehicle model SANDERO® year 2008 to 2011, excluding all other models in the same range and excluding
later modifications made to the vehicle by the manufacturer.
The Parrot brand name and logos are the exclusive property of Parrot SA.

This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
SANDERO
Accessories required
Disassembly
15min
Mounting kit
20min
Reassembly
15min
Testing
15min
Total
1h 05min
YES
+IGN
YES
ISO
N/A
UNIKA
FRONT LOUDSPEAKER
TEL mode
ALL
MUSIC mode
Fitting time (estimated) / Main features
Tools
-Multimeter or Test lamp
- Wire tie
-Electrical tape
"Please contact your wholesaler to purchase accessories. A list of wholesalers is
available at www.certified.parrot.com. "
To get the most out of your hands-free kit we recommend that you update your
software regularly. The update procedure can be found at
www.parrot.com/usa/support/downloads
Updating
Plastic trim removal tools
FACOM / BOJO
FACOM DX-25 kit (n°4 tools)

This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
SANDERO
Disassembly

This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
SANDERO
Disassembly
Insert the removal tools into the
slots on each side of the radio.
Unclip the radio, pull it out and
unplug the connectors and the
antenna. Then remove the radio.
Remove the passenger side door
seal.
1
3
2
4
Using the plastic trim removal
tools, unclip the car stereo and
air conditioning surround
starting at the bottom and
moving towards the top.

This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
SANDERO
Microphone passage
Glue the bracket (supplied) to the
windscreen, after having
thoroughly degreased the surface.
Run the cable under the headliner
to the passenger side support.
Run the cable along the passenger
side windshield support while
replacing the door seal.
Then pass the cable under the
dashboard on the bottom of the
glove box.
1
3
2
4
5
To finish, run it to the radio
housing.

This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
SANDERO
Feeding the accessory cable
In the bottom of the glove box,
insert the cable into the hole
next to the DIAG socket.
Then bring it out into the radio
housing taking care to leave
enough length.
1 2

This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
SANDERO
ISO
adapter
Fitting the hands-free system 1 / 2
On the kit connector (supplied), reverse the
fuses (i.e. swap the red and orange wires) and
connect all the cables to the blue box as shown
in the diagram below. Test everything before
reassembling...
1
...then store the box under the radio housing.
2

This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
SANDERO
Fitting the hands-free system 2 / 2
Glue the bracket (supplied) under
the cover of the central console
between the air vents, after
carefully degreasing the surface.
Pass the cable into the air
conditioning housing while clipping
the console cover (TAKE CARE to
avoid cutting the screen cable).
Re-clip the assembly and insert
the screen.
3
5
4
!

This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
SANDERO
Testing
Before refitting the system, switch the kit on using the
ignition (or by starting the car). By pushing the central knob
of the remote control, check:
1 - that the menu is displayed on the screen (language or
iPod etc)
2 - that the radio system is muted when the kit is in use (click
in the blue box)
3 - that the sound through all speakers is properly muted
4 - that there is sound through the front speakers for spoken
menus
5 - then turn off the ignition, verify that the kit turns off and
that the message “goodbye” is displayed on the screen
(otherwise reverse the fuses on the kit power supply
harness)
6 - pair a telephone with the kit and make a call (check that
both the microphone and the kit are working)

This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
SANDERO
Reassembly
Refit the system using the following procedure:
1 - reconnect the connectors and the antenna to the radio, slide it into its housing.