Parrot CK3100 Series User manual

This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
Installation manual:
Parrot MKi + Parrot
CK3100 range
The brand name KIA RIO and the KIA logo are the property of KIA MOTORS.
This document is only valid for the vehicle model RIO® year 2011, excluding all other models in the same range and excluding later
modifications made to the vehicle by the manufacturer.
The Parrot brand name and logos are the exclusive property of Parrot SA.

This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
Accessories required
Disassembly
20min
Mounting kit
30min
Reassembly
20min
Testing
15min
Total
1h25min
YES
+IGN
NO
ISO
N/A
UNIKA
FRONT LOUDSPEAKER
TEL mode
ALL
MUSIC mode
Fitting time (estimated) / Main features
Tools
- Phillips screwdriver
- Multimeter or Test lamp
- Wire tie
- Round file (or a knife)
"Please contact your wholesaler to purchase
accessories. A list of wholesalers is available at
www.certified.parrot.com. "
Kram ref.
Dealer ref.
CK range
86394
N/A
MKi range
84394X389
N/A
Photos for illustration purposes
CK range MKi range
To get the most out of your hands-free kit we recommend that you update your
software regularly. The update procedure can be found at
http://www.parrot.com/usa/support/downloads
Updating
Plastic trim removal tools
FACOM / BOJO

This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
Disassembly

This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
Disassembly
Using the plastic trim removal
tools, firmly unclip the radio and
air vent surround and place it on
top being careful to disconnect
the HAZARD WARNING switch.
Unscrew screws 1, 2, 3 and 4
around the radio. Pull and remove
it taking care to disconnect the
connectors and aerial.
Using the plastic trim tools, unclip
the cover located on the right side of
the dashboard.
Then remove the passenger side
door seal.
1
3
2
4
1
2
3
4

This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
Using the plastic trim tools, run
the cable under the head liner.
Microphone passage
Glue the bracket (supplied) to the
windscreen, after having
thoroughly degreased the surface.
Run the cable replacing the seal
on the passenger door.
Pass the cable into the
dashboard on the right side.
Run it behind the glove box
passing it underneath.
Then pass the cable towards the
radio.
1
3
2
4
5 6

This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
Feeding the accessory cable
In the glove box, using a semi-
rigid guide.
Pass the cable from the top right
towards the radio.
Be careful to leave enough
length.
1 2
3

This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
ISO adapter
Fitting the hands-free system 1 / 2
Connect the adaptor (86394 for the CK or
84394X389 for the Mki) to the original connector
and connect all of the wires to the blue box as
shown in the diagram below. Test the assembly
before reassembly and then slide everything
behind the air conditioning control unit.
1

This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
Fitting the hands-free system 2 / 2
Glue the bracket to the top left of
the screen, after carefully
degreasing the surface.
Pass the cable to the radio from
the left (taking care to store the
cable along the vent).
2 3

This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
Testing
Before refitting the system, switch the kit on using the
ignition (or by starting the car). By pushing the central knob
of the remote control, check:
1 - that the menu is displayed on the screen (language or
iPod etc)
2 - that the radio system is muted when the kit is in use (click
in the blue box)
3 - that the sound through all speakers is properly muted
4 - that there is sound through the front speakers for spoken
menus
5 - then turn off the ignition, verify that the kit turns off and
that the message “goodbye” is displayed on the screen
(otherwise reverse the fuses on the kit power supply
harness)
6 - pair a telephone with the kit and make a call (check that
both the microphone and the kit are working)

This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
Reassembly
Refit the system using the following procedure:
1 - reinstall the radio reconnecting the adaptor and the antenna
2 - refit the 4 screws (1, 2, 3 and 4) around the radio
3 - clip the cover back on with the air vents (TAKE CARE not to cut the cable)
4 - refit the right dashboard panel