Patpet 772S User manual

No Brk Collar
Rainproof & Rechargeable
User Manual
No Bark Collar

Thank you very much for choosing our bark collar.
Our bark collar is backed by a 100% quality guarantee!
If you are not satisfied for any reason, please contact our
customer service immediately we will help you within 24
hours.
Important Safety Information
Do not attempt to use this product to correct the behavior of dogs that are
aggressive to people or other animals. Aggressive dogs may associate training
collar stimulation with other control stimulus and become more aggressive.
Aggressive behavior should be corrected by a dog training specialist. If you
are not sure whether this product apply to your dog, you can consult
veterinarian or certified trainer. And the no bark collar must only be used on
healthy dogs. If your dog has health problems, please take him to the
veterinarian first.
Not suitable for aggressive dogs

Packing List
1 X Receiver(includes 1 X Nylon Collar)
1 X USB Charging Cable
1 X Test Bulb
1 x User Manual
Main Features
uPower button -- 0-7 grade, 7 grade
means fully charged
uVibration button -- 0-7 grade, 7 grade is
the highest vibration and then
decreases in turn, until 0 grade will
close the vibration mode
uShock button -- 0-7 grade, the array of
shocks grade is the same as the
vibration, 7 grade is the highest, 0
grade is closed.
uSensitivity button --- adjustable 1-7
grade is suitable for huge to mini breed.
Level1 is the least sensitive.Level 7 is
the most sensitive.
uPlease note: Usually the digital will not
show, and when the collar is activated
will show the grade of power not the
grade of mode
uThe bark collar fits all dogs from 6.6-
150 LBS.
uProduct weight :70g
uRainproof and Rechargeable
uThe perimeter range of the dog
collar:7.4-23.5in

Using method
* Once you receive the collar please test it firstly. (testing way as below)
* After testing please configure the suitable mode for your dogs follow the
instructions and your actual situation! (instructed picture as below)
* We suggest not using shock model at first, choosing beep and vibration mode to
let your dog adapt to it. If these are not valid for it you can use the shock mode,
and please set level 1 in the beginning and then increase gradually according your
Need.
Friendly Reminder
* Keeping one finger distance between the neck and the collar to avoid being
triggered by the shaking/moving/running etc.
* Do not wear longer than 12 hours per day. If it is possible, reposition the collar
every 1 to 2 hours .
* Take the barking collar off before swimming, it is rainproof, not waterproof.
* Please take off your iron collar,before you put the bark collar on.
* Clean the contacted area between the collar and the neck weekly with a damp
cloth
* Examine the contacted area between the collar and the neck daily to avoid rash
or sore
ON-OFF
Press the Power Button once to turn on, press the Power Button for 3
seconds again to turn off

Product working principle
This product uses the vibration sensor for sensitivity distinction, when the dog barks,
it will trigger the sensors thus triggering the product. The collar will beep then the
vibration and last the shock (depending the setting).
Auto-Protection Mode
If the collar keep activates for 7 times in one minute, it will enter auto-protection mode,
the display will flash "E", one minute later the product will enter the work mode.
When in automatic protection mode, press any button will make the product re-enter
the work mode
Chargeable collar
Gently press the power button, you can know how much the power it is.
1 hour of charge time gives you 14-20 days of using.
When charging the product, the digital tube will display the power and continue to
flash.
When the product is fully charged, the digital tube will display "7".
Rechargeable Battery (280mAh)
Adapter is not include
Adapter Current is less than 1A

Testing
1. Turn on the power
2. Set the sensitivity to 5-7grade and the shock
greater than 0 grade
3. Wear the tester on the conductive silicone prongs
behind collar
4. Please send a short voice like “wow” (as short as
possible) to sensors.Since the frequency of human
voice is different from that of dogs,please test more
time.
Frequently Asked Questions
Q: Which part of the dog's body can put the receiver?
A: Below the throat.
Q: Why the product just bought back but can not work?
A: First confirm that the product is powered, then turn on the power and adjust the product
sensitivity to 7 grade
Q: Why product does not work when the dog barking?
A: Please to ensure that the products close to the dog's neck, and Increase the sensitivity .
Q: Can I not use shock mode?
A: Of course, please turn the grade of shock mode to 0 .
Q: Will the collar vibrate if another dog barks?
A: You never worried about this case, our collar build-in smart barking detection chip, only your dog's
barking can trigger the collar while other dogs' barking nearby can‘t trigger it.
If you have any questions about our bark collar, please contact our customer service immediately.
Sensors

Attention:
Q: Which part of the dog‘s body can put the receiver?
A: Below the throat.
Keeping one finger distance between the neck and the collar
to avoid being triggered by the shaking/moving/running etc.
Please take off your iron collar,before you put the bark collar on.

Tips
•You should choose these functions according to the size of your dogs.
•Refer to the Dog Size Reference Chart for a detailed guideline on which
•sensivity grade is best suited for your dog.
•You can place the collar on your dogs without powering the device on to allow
them to adapt to the collar.
•Tips for how to choose optimal sensitivity for your dogs:
•You can adjust the sensitivity from the highest sensivity gear 7. If your dog is
accustomed to the sensivity levels, you can lower the sensivity grade.
•You are recommended to use sound function first (The sound is default
setting), then choosing the vibration function or static shock function
according to how your dog responds to the collar.
•You are recommended to use the static shock function from the weakest
grade 1.
•Tips for how to choose optimal vibration function or static shock function for
your dogs. (The sound is default setting)
The size of dog
Small
Medium
Large
Huge
Sensitivity grade
5-7
4-6
2-5
2-5

The size of dog
Small
Medium
Large
Huge
Vibration grade
1-2
1-2
3-4
5-7
Static shock grade
0-1
1-2
3-4
3-5
Dog Size Reference Chart
Size
Weight(lb)
Type
Small
6.6-22
Poodle; Pomeranian; Dachshunds; French
Bulldogs; Shih Tzu; Miniature Schnauzers;
Cavalier King Charles Spaniels; Boston
Terriers; Pembroke Welsh Corgis; cocker
spaniel
Medium
24-66
Beagles; Bulldog; German shorthaired
Pointers; Siberian Huskies; Australian
Shepherds; Shetland Sheepdogs; English
Springer Spaniels
Large
68-88
Labrador Retrievers; German Shepherd Dogs;
Golden Retrievers; Boxer
Huge
>88
Rottweiler; Doberman Pinschers; Great
Danes; Mastiffs
Made In China