Patriot Lighting 29145 User manual

ITEM #346-0930
MODEL #29145
UNDERCABINET LIGHT
1
ATTACH YOUR RECEIPT HERE
Serial Number Purchase Date
Questions, problems, missing parts? Before returning to your retailer, call our
customer service department at 1-800-554-6504, 8 a.m. - 4:30 p.m, EST,
Monday - Friday.

PACKAGE CONTENTS
2
A Outlet Cord 1
Fixture 1
Interconnection Cord 1
B
C
PART DESCRIPTION QUANTITY
A
C
B

Retaining
Clips
Machine
Screw
3
HARDWARE CONTENTS
WARNING: To reduce the risk of fire, electric shock, or injury to persons:
• Always be certain that the electric current is turned off before installing, cleaning, or maintaining
these lighting products.
• If attached to a movable cabinet, route and secure cords so that they will not be pinched or
damaged when the cabinet is pushed to the wall.
• Not intended for recessed installation in ceilings, or soffits.
• This lighting fixture is for indoor use only.
• Not intended for surface installation inside built-in furnishings such as kitchen cabinets, china
cabinets, or trophy cases.
• The National Electric Code (NEC) does not permit cords to be concealed where damage to the
insulation may go unnoticed. To prevent fire damage, do not run cord behind walls, ceilings,
soffits, or cabinets where it may be inaccessible for examination. Cords should be visually
examined periodically and immediately replaced when any damage is noted.
• Do not alter cords in any manner.
• Do not touch hot lens.
CAUTION:
• Read and understand all instructions and illustrations completely before proceeding with assembly
and installation of this fixture.
• If you have any doubts about how to install this lighting fixture, or if the fixture fails to operate
completely, please contact a qualified licensed electrical contractor.
• All parts must be used as indicated in these instructions. Do not substitute any parts, leave parts
out, or use any parts that are worn out or broken. Failure to obey this instruction could invalidate
the ETL certification, UL listing. or C.S.A. certification of this fixture.
• This fixture has a polarized plug (one blade is wider than the other) as a safety feature. This plug
can be used in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord
unless the plug can be fully inserted. Do not alter the plug.
• Not for use with a dimmer.
• Use only the plastic clips provided to secure the wires.
• Not for use with plastic furniture.
• Do not mount over a sink or stove.
• The mounting surface must be at least 1/2 inch thick.
Please read and understand this entire manual before attempting to assemble, operate or install the
product. If you have any questions regarding the product, please call customer service at
1-800-554-6504, 8 a.m. - 4:30 p.m., EST.
SAFETY INFORMATION
Qty: 3 Qty: 2
AA BB

ASSEMBLY INSTRUCTIONS
CAUTION:
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and diagram. If any part is missing or damaged, do not attempt to assemble the product.
Contact customer service for replacement parts.
Estimated assembly time: 5 min.
• NOTE: This fixture is only compatible with fixture models: 29145 & 29146.
• Maximum number of fixtures per run can not exceed 10 of the 27 inch fixtures (model 29146) or
the combined fixture wattage of 100W.
1. Keep in mind the distance from fixture (B) to
receptacle and the power cord (A) length. Mounting
surface should be a minimum of 1/2 in. thick. When
installing multiple fixtures in a run, leave a minimum of
2-1/2 in. clearance for interconnection cord between
fixtures.
The power cord (A) only plugs into one end of each
fixture (B). Make sure the 120 volt input end of the
fixture is loacted where the power cord will reach it.
The interconnection cord will plug into either end of
the fixture.
2. Hold fixture housing (B) in desired position and mark
position of mounting holes.
Attch fixture(s) (B) to surface with screws (BB). If
needed, drill a 1/16 in. pilot hole.
4
1
A
B
2B
BB
Hardware Used
Machine
Screws
BB x 2

ASSEMBLY INSTRUCTIONS
5
CARE AND MAINTENANCE
TROUBLESHOOTING
• Always be certain that electric current is turned off before cleaning this item.
• Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on
fixture, as it will damage the metal finish.
• For optic cleaning: Gloves should be worn while handling the optic assembly as finger oils may
damage the optics and affect performance. Optics should only be cleaned if necessary, and only
use a soft moist cloth with mild soap and water. Solvents should not be used as they may cause
damage to the optics.
Fixture does not light. 1. The power cord is not plugged in. 1. Plug in power cord.
2. The switch is not “ON”. 2. Turn Switch to “ON”.
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
3. If interconnection cord (C) is being run from cabinet
to cabinet, a notch such as a “V” could be cut into
cabinet side panels to help keep cable out of sight.
4. Plug the power cord (A) into fixture and then into
outlet.
Peel backing off retaining clip(s) (AA) and affix to
desired location(s).
3
C
B
4
AA
Hardware Used
Retaining
Clips
AA x 3

Printed in China
6
WARRANTY
PATRIOT LIGHTING® 346-0903 WARRANTY
5-YEAR LIMITED WARRANTY:
This PATRIOT LIGHTING® brand light fixture carries a five (5) Year Limited Warranty to the original
purchaser. If, during normal use, this PATRIOT LIGHTING® light fixture fails due to a defect in material
and workmanship within five (5) years from the date of purchase, simply bring this light fixture with your
original sales receipt back to your nearest MENARDS® retail store. At its discretion, PATRIOT
LIGHTING® agrees to have the lighting fixture replaced with the same or similar PATRIOT LIGHTING®
product free of charge, within the stated warranty period, when returned by the original purchaser with
original sales receipt. Notwithstanding the foregoing, this limited warranty does not cover damage or
failure caused by misuse or abuse including but not limited to improper installation, accident,
unauthorized repair, maintenance, or modifications of the merchandise. This warranty: (1) excludes
expendable parts including but not limited to light bulbs, batteries; (2) carries a 2-year finish warranty
protecting finish against tarnishing, flaking, and discoloration; (3) shall be void if this lighting fixture is not
installed in the U.S.A; (4) does not cover products installed within three miles of saltwater coastline or
any area prone to salt spray; and (5) does not cover any losses, labor, injuries to persons/property or
costs. This warranty does give you specific legal rights and you may have other rights, which vary from
state to state. Be careful, it is recommended that installation be done by a qualified professional; the
purchaser has sole responsibility for proper installation in compliance with all state and local code
requirements. Seller’s employees are not qualified to advise you on the use of this Merchandise. Any
oral representation(s) made will not be binding on seller or its employees. The rights under this limited
warranty are to the original purchaser of the Merchandise and may not be transferred to any subsequent
owner. This limited warranty is in lieu of all warranties, expressed or implied including warranties or
merchantability and fitness for a particular purpose. Seller shall not be liable for any special, incidental,
or consequential damages. The sole exclusive remedy against the seller will be for the replacement of
any defects as provided herein, as long as the seller is willing or able to replace this product or is willing
to refund the purchase price as provided above.
For questions / comments, technical assistance or repair parts –
Please call toll free at: 1-800-554-6504 (M-F 8am – 4:30pm)
SAVE YOUR RECEIPTS. THIS WARRANTY IS VOID WITHOUT THEM.
Rev. 07-22-13