BROSA Baker Entertainment Unit User manual

ASSEMBLY GUIDE
Baker Entertainment Unit
v1.0

Components
What you need
Body x 1
Before you get started, check you have all of the pieces below. If anything’s
missing, please visit www.brosa.com.au/pages/product-return-and-parts-request
and we’ll sort it out right away.

1. Door Adjustment
Drawer door could be adjusted vertically by ±2.5mm. Turn the knob under-
neath the drawer to adjust the vertical position so that there are equal gaps
above and below the front panel.
+2.5
-2.5
Drawer Adjustment

2. Drawer Uninstallation
To take the drawer out, open it, pull the lock button underneath the drawer
base panel [1]. Gently lift the front part of the drawer so that the brackets at
the front of the runners separate from the holes on the side panels of the
drawer [2]. Slide the drawer out of the brackets at the back of the runners [3].
1
23
12
3

3. Drawer Installation
To put the drawer back in, place the drawer upon the runners and t the
brackets at the back of the runners into the holes of the drawer [1]. Gently put
down the front part of the drawer so that the brackets at the front of the run-
ners t into the holes on the side panels of the drawer [2]. Push back the lock
button underneath the drawer to secure the drawer in place [3].
1
2
3
1
2
3