PB TEEN CUSTOMIZE-IT TWO TIERED HUTCH User manual

Date:2‐Sep‐14www.pbteen.com  Page1of3
Rev:  
























CUSTOMIZE-IT TWO TIERED HUTCH







Date:2‐Sep‐14www.pbteen.com  Page2of3
Rev:  
Important Safety Instructions:
Please read all instructions carefully before assembling.
Keep instructions for future use.
Use only vendor supplied hardware to assemble. Using unauthorized hardware could jeopardize the structural
integrity of the item.
Pre-assembly:
Remove all parts and hardware from the box and lay out on a clear carpeted or scratch-free work surface, as
this will avoid damaging parts during assembly. The shipping box provides an ideal work surface.
Do not dispose of any packaging or contents of the shipping carton until assembly is completed to avoid
accidentally discarding small parts or hardware.
Use the parts and hardware lists below to identify and separate each of the pieces included.
The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.
The use of power tools to aid in assembly is not recommended. Power tools can damage product.
Parts Included:
(A) Hutch
A
1 pc
Hardware Included:
(B) Metal Plate (C) Pan Head Wood Screw Ø3.5mmx16mm
B C
2 pcs 4pcs
Tools Required:
Phillips Screwdriver (not included):

Date:2‐Sep‐14www.pbteen.com  Page3of3
Rev:  
Assembly Instruction Steps:
1. Align the pre-drilled holes on back. And then attach Hutch (A) to Base (Sold Separately) using metal plates(B)
and Pan Head Wood Screws (C), securely tighten the screws with Phillips Screwdriver (Not included).

Care Instructions:
Hardware may loosen over time. Periodically check to make sure all connections are tight.
Re-tighten if necessary.
Dust often using a clean, soft, dry and lint-free cloth.
We do not recommend the use of chemical cleaners, abrasives, or furniture polish on the product.


Thankyouforyourpurchase
Stores|catalog
Make sure the holes are aligned before
tighten the screws.