PB TEEN Small Space Solutions Desk User manual

www.pbteen.com
Small Space Solutions Desk
PRE-ASSEMBLY:
•For your safety and ease, assembly by two adults is recommended.
•Please read all instructions before beginning assembly. The illustrations provided allow for easier assembly
when used in conjunction with the assembly instructions.
•Remove all parts and hardware from box and lay out on a carpeted or scratch-free work surface. The
shipping box provides and ideal work surface. Do not dispose of any contents until assembly is completed to
avoid accidentally discarding small parts or hardware.
•Use the parts and hardware lists to identify and separate each of the pieces included prior to assembly.
•Note: DO not fully tighten the bolts until all parts are in place. Failure to follow these instructions may
cause the bolts to misalign during assembly.
•Do not use power drill as it may cause cracking.
HARDWARE LIST
C - Flat Washer – 8pcs
D - Spring Washer – 8pcs
E – Nut – 8pcs
F – Wrench – 1pc
ASSEMBLY INSTRUCTIONS:
1. Place the Desktop (B) upside down on a soft, carpeted work place. Attach the (4) Legs (A) to the Desktop
using (8) Flat Washer (C), (8) Spring Washer (D) and (8) Nuts (E) in place and secure with a Wrench (F).
Upright the assembled Desk and adjust the levelers located on bottom of feet when required.
PARTS LIST
A – Leg – 4pcs
B – Desktop – 1pc
CARE INSTRUCTIONS:
•Dust with a clean, soft cloth.
•Avoid the use of chemicals and
harsh cleaning agents.

www.pbteen.com
Small Space Solutions Desk Hutch
PRE-ASSEMBLY:
•For your safety and ease, assembly by two adults is recommended.
•Please read all instructions before beginning assembly. The illustrations provided allow for easier assembly
when used in conjunction with the assembly instructions.
•Remove all parts and hardware from box and lay out on a carpeted or scratch-free work surface. The
shipping box provides and ideal work surface. Do not dispose of any contents until assembly is completed to
avoid accidentally discarding small parts or hardware.
•Use the parts and hardware lists to identify and separate each of the pieces included prior to assembly.
•Note: DO not fully tighten the bolts until all parts are in place. Failure to follow these instructions may
cause the bolts to misalign during assembly.
•Do not use power drill as it may cause cracking.
TOOLS REQUIRED (but not included): Phillips Screwdriver
ASSEMBLY INSTRUCTIONS:
2. Place the Hutch (A) on the Laptop Desk (sold separately). Align Mending Plate (B) over the pre-drilled
holes and secure with Wood Screws (C) as shown below. Repeat with the other Mending Plate.
B.
PARTS LIST
A – Hutch
HARDWARE LIST
B – Mending Plate 2pcs
C – Wood Screw 3x12mm 8pcs
A.
CARE INSTRUCTIONS:
•Dust with a clean, soft cloth.
•Avoid the use of chemicals and
harsh cleaning agents.