PCE Health and Fitness PCE-666 User manual

Temperature Meter
PCE-666
USER MANUAL
PCE Americas Inc.
711 Commerce Way
Suite 8
Jupiter
FL-33458
USA
From outside US: +1
Tel: [phone]
Fax: [phone]
[e-mail]
PCE Instruments UK Ltd.
Unit 11
Southpoint Business Park
Ensign way
Hampshire / Southampton
United Kingdom, SO31 4RF
From outside UK: +44
Tel: [phone]
Fax: [phone]
[e-mail]
www.pce-instruments.com/english
www.pce-instruments.com

2
INTRODUCTION
Thank you for purchase of this Thermometer. This device is a
non-contact(infrared) thermometer and contact (probe &
clamp) thermometer. Simply aim the thermometer at the
target and press the measurement button to display the
surface temperature. The distance to target ratio is 1:1
therefore the thermometer should be positioned as close to
the target as possible.
1. FEATURES
⚫User selectable ºC or ºF
⚫Data Hold
⚫Overrange indication
⚫Automatic Power Off
⚫Emissivity Digitally adjustable from 0.10 to 1.00
⚫MAX, MIN, LOCK modes
⚫Resolution 0.1ºC(0.1ºF)
2. WIDE RANGE APPLICATION
Food preparation, Safety inspectors, Plastic molding,
Asphalt, Marine and Screen printing, measure ink and Dryer
temperature, HVAC/R, Diesel and Fleet maintenance.
3. ºC or ºF Mode
To change this thermometer from ºC to ºF or from ºF to ºC,
when you using infrared to measuring, firstly turn the
instrument on by pressing the “IRT” button, release the “IRT”
button to hold measuring data. Then press the “MODE”
button four times, the ºC or ºF symbol will flash, press the
“IRT” button or “△” button to change the scale. When you
using Probe or Clamp to measuring, you can directly press
“MODE” button once to change the scale.

3
4. MIN or MAX Mode
To utilize this thermometer MIN (minimum) or MAX
(maximum) mode, firstly turn the instrument on by pressing
the “IRT” button, release the “IRT” button to hold measuring
data. Then press the “MODE” button once for MIN or twice for
MAX function. The “MIN” or “MAX” icon will flash, then press
the “IRT” button to confirm the “MIN” or “MAX” mode. The
thermometer will display the MIN or MAX reading only.
5. LOCK Mode
The LOCK mode is particularly useful for continuous
monitoring of temperatures. To utilize this thermometer’s
LOCK mode. Firstly turn the instrument on by pressing the
“IRT” button, release the “IRT” button to hold measuring data.
Then press the “MODE” button three times for the LOCK
mode function. The “LOCK” icon will flash, then press “IRT”
button to confirm the LOCK measurement mode. The
thermometer will continuously display the temperature.
6. Emissivity Adjustment Mode
The Emissivity Adjustable Mode useful for adjustable the
emissivity. Firstly turn the instrument on by pressing the “IRT”
button, release the “IRT” button to hold measuring data. Then
press the “MODE” button five times for the Emissivity
Adjustable Mode function. press the “△” button or “IRT”
button adjustable the Emissivity.

4
7. Clamp or Probe Mode
To change this thermometer from Clamp to Probe or from
Probe to Clamp, firstly turn the instrument on by pressing the
“ON/OFF” button. If you open the Probe, this thermometer
will measuring by Probe, and when you close the Probe ,the
thermometer will measuring by Clamp.
8. SPECIFICATION
AUTO POWER OFF:
To save battery life, When the thermometer in data hold
mode, it will automatically turn off after approximately 15
second. When the thermometer work on , it will automatically
turn off after approximately 20 minutes.
IR TEMP. Range
-35ºC to +260ºC/ -31ºF to
500ºF
Response Time
less than 500ms
Infrared Accuracy
+2% of reading or +2ºC/ +4ºF
Optical resolution
1:1 Distance to Spot size
Emissivity
Adjustable 0.10～1.00
Probe Temperature
Range
-40ºC to 260ºC/
-40ºF to 500ºF
Clamp Temperature
Range
-40ºC to 230ºC/
-40ºF to 446ºF
Temperature Accuracy
+1.5 % +2ºC/ +3.8ºF
Resolution
0.1ºC / 0.1ºF