Perlesmith PSLLK1 User manual

Thank you for choosing our product! We strive to provide the best
quality and services for our customers. Would you kindly share
your experience on Amazon if you are satisfied? Should you have
any issues, please don't hesitate to contact us.
Telephone：
1-800-556-6806 Mon-Fri 10am - 6pm (PST) (USA) (CAN)
Email：
[email protected] (US/CA/DE/UK/FR/IT/ES/AU)
V1.0
PSLLK1

TV Bracket
TV Bracket
Level
Supplied Parts
Tools Needed (Not lncluded)
Stud Finder Tape Measure Pencil Drill
5.5mm
Wood Drill
10mm
Concrete Drill
13mm
Socket Wrench Screwdriver
Hammer
IMPORTANT SAFETY INFORMATION
•Check package contents against Supplied Parts and Hardware List to assure that all
components were received undamaged. Do not use damaged or defective parts. lf you
require replacement parts, contact customer service at [email protected]
•Not all parts and hardware included will be used.
•Carefully read all instructions before attempting installation. If you do not understand
the instructions or have any concerns or questions, please contact customer service at
[email protected]
•This product may contain moving parts. Use with caution.
•Do not use this product for any purpose or in any configuration not explicitly specified
in this instruction. We hereby disclaim any liability for injury or damage arising from
incorrect assembly, incorrect mounting, or incorrect use of this product.
•DO NOT INSTALL INTO DRYWALL ALONE.
•Please check www.perlesmith.com for more products and company information.
1
Wall Plate 01 x1
02 x1
x1
x1
03
04

Washers
M8
x4
x4
10mm
x4
22mm
x8
2.5mm
2
Supplied Hardware
Hardware for Attaching the Wall Plate to Wall
These anchors are for
concrete or brick walls
ONLY. DO NOT use them
in drywall or wood studs.
CAUTION!
x4
A3
Wall
Anchor
Lag Bolts
ST8X65
x4
A1 A2
Hardware for Attaching TV Brackets to TV
05 06
x4
M6/M8
M6 x 15mm x4 M6 x 35mm x4
M8 x 25mm x4 M8 x 35mm x4
M8
M6
Washers
Spacers
TV Screws
07
[Only one size fits your TV]
[If necessary]
M8 x 50mm x4

3
Step 1 Check TV Hole Pattern and Select TV Screws
Step 2
Select Spacers (if needed)
Only one screw size fits your TV.
M6 M8
WITH SPACER
3
For Rounded TV
For Flat TV with:
Inset Holes Cable Interference
aLong Screw
Short Screw
Washer
Washer
Spacer
TV Bracket
TV Bracket
EXTRA
07
07
05
06
05
NO SPACER b
For Flat TV
Spacer not necessary
SPACE
200 mm ≈ 7 7/8 in.
400 mm ≈ 15 3/4 in.
100 mm ≈ 4 in.
300 mm ≈ 11 3/4 in.
600 mm ≈ 23 6/10 in.
MAX:600mm/23.6 in.
MAX:400mm/16 in.

4
Secure the left half of wall plate [01] to the right half of wall plate [02] with
the pre-assembled screw [S].
Assemble the Wall Plate
Tighten
Loosen
DO NOT overtighten.
Tighten only until snug.
Too Short Too Long
Step 3 Secure the TV Brackets to Your TV
Alternate Spacer
Setups
With Spacer
b
07 No Spacer
a
07 07
05
05
06
04
03
Step 4
01
02
S

5A-1
5A-2
Use a stud finder (not included) to
locate wood studs. Mark the edge and
center locations.
Position the wall plate [01] and [02] at
your desired height and line up the holes
with your stud center line. Level the wall
plate and mark the holes.
24 in.(609mm)
16 in.(406mm)
● Any material covering the wall must not exceed 5/8 in. (16 mm)
● Nominal wood stud size: common 2 x 4 in. (51 x 102 mm) minimum 1½ x 3½ in.
(38 x 89 mm)
● Stud center must be verified
●Ensure the wall plate [01] and [02] is securely fastened to the wall before
continuing on to the next step.
●DONOT USE ANCHOR [A3] FOR THIS STEP!
WARNING:
Step 5
For wood stud installation, follow STEP 5A
For concrete installation, follow STEP 5B
Secure the Wall Plate [01] and [02] to Wall
Step 5A
Wood Stud Option
X
5
●Avoid potential personal injury or property damage! DO NOT over-tighten the lag bolts
[A1]. Tighten the lag bolts [A1] only until the washers [A2] are pulled firmly against the
wall plate [01] and [02].
01
02

WARNING:
●Ensure the wall plate [01] and [02] is securely fastened to the wall
before continuing on to the next step.
● Any material covering the wall must not exceed 5/8 in. (16 mm)
● Mount the wall plate directly onto the concrete surface
● Minimum solid concrete thickness: 203 mm (8 in.)
● Minimum concrete block size: 203 x 203 x 406 mm (8 x 8 x 16 in.)
Wall
Anchor
A3
Step 5B Solid Concrete or Concrete Block Option
●Avoid potential personal injury or property damage! DO NOT over-tighten the lag bolts
[A1]. Tighten the lag bolts [A1] only until the washers [A2] are pulled firmly against the
wall plate.
ø5.5mm
65mm
6
5A-3
5A-4
10mm
Socket Wrench
Drill 4 pilot holes using a 5.5 mm
diameter drill bit. Make sure the
depth is not less than 60mm.
Install the wall plate using lag bolts
[A1] and washer [A2]. Tighten the
lag bolts [A1] only until the washers
[A2] are pulled firmly against the
wall plate [01] and [02] .
01
02

7
ø10mm
70mm
Drill 4 pilot holes using a 10mm diameter
drill bit. Make sure the depth is not less
than 70mm. Never drill into the mortar
between blocks.
5B-1
5B-2
5B-3
Position the wall plate at your desired
height, level the wall plate and mark the
pilot hole locations.
A1
A2
Use the hammer to knock
anchors [A3] into the wall.
Be sure the anchors [A3]
are seated flush with the
concrete surface.
A3
Install the wall plate using lag bolts [A1], washers [A2]
and anchors [A3]. Tighten the lag bolts [A1] only until
the washers [A2] are pulled firmly against the wall plate.
DO NOT over-tighten the lag bolts [A1].

8
Step 6
Secure the TV onto the Wall Plate
To Hang TV onto Wall Plate
1. Hang the TV brackets [03] and [04] onto the wall plate [01] and [02].
2. While pulling the rope down, press the bottom of the TV into the wall plate [01] and [02]
until the latches lock the TV brackets [03] and [04], then release the rope.
Pull the rope down to release the latches so as to remove TV from walll plate.
To Remove TV from Wall Plate
HEAVY! You may need
assistance with this step.
Locking
Press
03
04