Perlesmith PSCLF1 User manual

Thank you for choosing this Perlesmith product! At Perlesmith
we strive to provide you with the best quality products and
services in the industry. Please share your experience of our
product with others on www.perlesmith.com/pages/reviews if
you are satisfied. Should you have any issues, please don't
hesitate to contact us.
Technical Support:
1-800-556-6806 Mon-Fri 10am - 5pm (PST) (USA) (CAN)
Other Info:
[email protected] (US/CA/DE/UK/FR/IT/ES/AU)
Web Site: www.perlesmith.com
V1.0
Large Corner TV Wall Mount
Instruction Manual V3.0
Model: PSCLF1
UP
UP

Solid Concrete
or Concrete Block
CAUTION
DO NOT
install into
drywall alone Wood Studs
(with Drywall)
Verify Your Wall Construction
If you are are not sure the
wall construction, please
contact our product
support line at
1-800-556-6806 or
customer service at
[email protected]
Please carefully read all instructions before attempting installation. If you do not
understand the instructions or have any concerns or questions, please contact
our Technical Support line at 1-800-556-6806 or customer service at
[email protected]
CAUTION: Avoid potential personal injuries and property damage!
• Do not use this product for any purpose that is not explicitly specified in this
manual. Do not exceed weight capacity. We are not liable for damage or injury
caused by improper mounting, incorrect assembly or inappropriate use.
• This product is designed for use in wood stud, solid concrete, and concrete
block walls - DO NOT install into drywall alone.
• The wall must be capable of supporting five times the weight of the TV and
mount combined.
Minimum VESA pattern: 200mm/8 in.(W)x100mm/4 in.(H)
200 mm ≈ 7 7/8 in.
400 mm ≈ 15 3/4 in.
100 mm ≈ 4 in.
300 mm ≈ 11 3/4 in.
600 mm ≈ 23 6/10 in.
MAX:600mm/23 in.
MAX:400mm/16 in.
Check the VESA Pattern of Your TV before the Installation
IMPORTANT SAFTY INFORMATION
If your TV VESA is greater than 600x400 mm/23x16 in. or less than VESA
200x100mm/8x4in., this mount is NOT compatible.
If this mount is NOT compatible, please contact customer service at
[email protected] to find a compatible mount.
01 02 03 04 05 06 07 08 09 10 11 12 13 14

Supplied Parts and Hardware for Step 1
Supplied Parts and Hardware
Warning:This product contains small items that could be a choking hazard if
swallowed.
Before starting assembly, verify all parts are included and undamaged. Do not use
damaged or defective parts. lf you require replacement parts, contact our Product
Support line at 1-800-556-6806 or customer service at
[email protected]
• Please note: Not all hardware included in this package will be used.
Tools Needed (Not lncluded)
Stud Finder Tape Measure Pencil Drill
7/32 in.(5.5mm)
Wood Drill
3/8 in.(10mm)
Concrete Drill
1/2in.(13mm )
Socket Wrench Screw Driver
Hammer
TV Bracket
Spacers [if needed]
06 07
x4
M6/M8
Washers
x8
φ8.5x18x2.5mm
x4
φ8.5x18x10mm
x4
φ8.5x18x22mm
Note: The spacers are shown in accordance
with the actual size
[C1]
[B]
[C2] [C3]
x2
04
UP
01 02 03 04 05 06 07 08 09 10 11 12 13 14

Supplied Parts and Hardware for Step 2
Level x1
[Only one bolt size fits your TV]
TV Bolts08
M6 x 15mm x4
M8 x 25mm x4 M8 x 35mm x4 M8 x 50mm x4
M6 x 35mm x4
M6
M8
Note: The bolts are shown in accordance with the actual size
[D1] [D2]
[E1] [E2] [E3]
Arm and Wall Plate 01 x1 x2
05
UP
Wall Plate Template
UP
01 02 03 04 05 06 07 08 09 10 11 12 13 14

Note: The lag screw is shown in accordance with the actual size
Washers
M8
A2
Lag Screws
M8x65mm
x6
x6
A1
Wall
Anchors
x6
A3
These anchors are for
concrete or brick walls
ONLY. DO NOT use them
in drywall or wood studs.
CAUTION!
Supplied Parts and Hardware for Step 3
x2
03
Arm Extension
Socket Wrench
3/8 in.(10mm))
Allen Key
5/32 in.(4mm)
Front Support 02 x1
01 02 03 04 05 06 07 08 09 10 11 12 13 14

CAUTION: Ensure the TV brackets [04] are EQUALLY
CENTERED on your TV AND securely fastened in place.
Bolt length: Verify adequate thread engagement with bolts or bolts/spacers combination.
We recommend thread engagement by at least 5 turns.
-Too short will not hold the TV.
-Too long will damage the TV.
Note: If necessary, the spacers can be used in multi-layer. If the installation fails
after trying various methods, please contact customer service at
[email protected].
Too Short Too Long Correct Correct
M6 M8
Only one bolt size fits your TV.
Step 1 Secure the TV Brackets to TV
Select TV Bolts
04
04
Option A (For Flat Back TV)
Alternate
Spacer
Setups
07
(If needed)
06
08 D1/E1
B
C1/C2
Please note: The bolt hole locations on your TV my very in
accordance of the manufacturers design of the TV. We are
only illustrating possible locations of the bolt holes.
01 02 03 04 05 06 07 08 09 10 11 12 13 14

Spacers may be necessary for 2 holes ONLY.
Option C (For TV with A “Bump”)
06
Alternate
Spacer
Setups
08
D2/E2/E3
C1/C2/C3 07 08 D1/E1
B
04
04
04
04
Option B (For Round Back TV)
Alternate
Spacer
Setups
06
06 B
08 D2/E2/E3
07 C1/C2/C3
B
01 02 03 04 05 06 07 08 09 10 11 12 13 14

Option D
For cable interference or inset holes, use spacers to create extra
space between the TV and TV brackets
Alternate
Spacer
Setups
05
WARNING:
● Any material covering the wall must not exceed 5/8 in. (16 mm)
● Nominal wood stud size: common 2 x 4 in. (51 x 102 mm) minimum 1½ x 3½
in. (38 x 89 mm)
● Stud center must be verified
Step 2
For wood stud installation, follow STEP 2A
For concrete installation, follow STEP 2B
Attach the Arm and Wall Plate [01] to Wall
Step 2A Wood Stud Option
X
●DONOT USE ANCHOR [A3] FOR THIS STEP!
●Avoid potential personal injury or property damage! DO NOT over-tighten the
lag screws [A1]. Tighten the lag screws [A1] only until the washers [A2] are
pulled firmly against the wall plate.
●Ensure the arm and wall plate[01] is securely fastened to the wall before
continuing to the next step.
06 B
04
08 D2/E2/E3
07 C1/C2/C3
UP
UP
UP
01 02 03 04 05 06 07 08 09 10 11 12 13 14

Position the wall plate template
[05] at your desired height and line
up the holes with your stud center
line. Level the wall plate template
[05] and mark the holes.
Use a stud finder (not included) to locate
wood studs. Mark the edge and center
locations.
05
2A-1
2A-2
2A-3
ø7/32 in.(5.5mm)
2 9/16 in.(65mm)
Drill 6 pilot holes using a 7/32
in.(5.5mm) diameter drill bit. Make
sure the depth is not less than 2
9/16 in.(65mm).
UP UP
MAX
MIN
STUD
STUD STUD
STUD
25 in.
9 in.
The installable range
The installable range
Please note: When using the PSCLF1 corner mounts.
Find your stud locations, mark them and then lay the
mount out on the floor configuring it to your stud
locations before installing it. Making sure your
TV will fit your desired location.
01 02 03 04 05 06 07 08 09 10 11 12 13 14

Install the arm and wall plate using lag
screws [A1] and washer [A2]. Tighten
the lag screws [A1] only until the
washers [A2] are pulled firmly against
the wall plate.
2A-4
A1 A2 1/2 in.(13mm)
Socket Wrench
(Not lncluded)
HEAVY! You may need
assistance with this step.
UP
2B-1
WARNING:
Wall
Anchor
A3
Step 2B Solid Concrete or Concrete Block Option
●Avoid potential personal injury or property damage! DO NOT over-tighten the lag
screws [A1]. Tighten the lag screws [A1] only until the washers [A2] are pulled firmly
against the wall plate.
Position the wall plate template [05] at your
desired height, level the wall plate template
[05] and mark the pilot hole locations.(The
distance between the center location and the
corner of wall should be 525mm/20.6 in.)
UP
UP
05
05
●Ensure the arm and wall plate [01] is securely fastened to the wall
before continuing to the next step.
● Any material covering the wall must not exceed 5/8 in. (16 mm)
● Mount the arm and wall plate [01] directly onto the concrete surface
● Minimum solid concrete thickness: 203 mm (8 in.)
● Minimum concrete block size: 203 x 203 x 406 mm (8 x 8 x 16 in.)
● Never drill into the mortar between blocks.
525mm/20.6 in.
525mm/20.6 in.
UP
01 02 03 04 05 06 07 08 09 10 11 12 13 14