Perlesmith PSTVS04 User manual

V3.0
PSTVS04
Thank you for choosing our product! We strive to provide the best quality
and services for our customers. Would you kindly share your experience
on Amazon if you are satisfied? Should you have any issues, please don't
hesitate to contact us.
Telephone：[phone] Mon-Fri 10am - 6pm (PST) (USA) (CAN)
Email：[email protected] (US/CA/DE/UK/FR/IT/ES/JP/AU)

1
V1.0
Connecting the Support Pillar to Tempered Glass
Step 1
Pillar
x4
x
x
x
x
x
x3

2
Connecting the TV Plate to Support Pillar
Step 2
pillar
Put O (Tempered Glass) on the table. Put R (Metal Pad) and L
(M26x25 Bolt) under O. Turn Y (Plastic Cover) and P (Support
Pillar) upside down under O to install and then tighten screws.
If you find the support column (P) is not in the correct direction, please see figure 1.1
below. Loosen M6x25 screws(L), adjust the support to the correct direction then
tighten screws again.
R
Y
O
LR

3
Measure VESA and Check TV screws
Measure the distance between the holes located at the
back of your TV (these measures may form the shape of a
square, or a rectangle) and check that these taken
measures are within the VESA (*) range for this wall
mount. (*) VESA: International standard established by the
TV manufacturers used to determine if LCD/LED TVs are
compatible with wall mounts.
Please select the proper screw length for your
TV by hand tightening to check your flat panel
thread depth.
Step 3

4
Mounting the Monitor Bracket to a TV
Step 4

5
Insert the safety lock in the bottom of
the bracket and then tighten the screws.
5
5
5.3
5.4
Attaching TV to TV Plate and Mananging the Wires
Step 5