Petsafe PBC17-13465 User manual

Operating Guide
Manuel d’utilisation
Gebruiksaanwijzing
Manual de funcionamiento
Guida all’uso
Gebrauchsanweisung
PBC17-13465
PBC45-13466
Big Dog Rechargeable
BarkControl
Collier anti-aboiements
rechargeable pour grands chiens
Oplaadbare blafbeheersing
voor grote honden
Collar antiladridos recargable
para perros grandes
Controllo dell'abbaio ricaricabile
per cani di grossa taglia
Wiederaufladbare
Bellkontrolle für große Hunde
Please read this entire guide before beginning
Veuillez lire ce manuel en entier avant de commencer
Gelieve deze gids volledig door te lezen voordat u begint
Por favor, lea detenidamente este manual antes de empezar
Si prega di leggere attentamente la guida all’uso prima di utilizzare il collare
Bitte lesen Sie die gesamte Betriebsanleitung vor dem Trainingsbeginn

2 www.petsafe.net
ENFRNLESITDE
IMPORTANT SAFETY INFORMATION
Explanation of Attention Words and Symbols used in this guide
This is the safety alert symbol. It is used to alert you
to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible injury
or death.
WARNING indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION, used with the safety alert symbol, indicates a
hazardous situation which, if not avoided, could result in
minor or moderate injury.
CAUTION, used without the safety alert symbol,
indicates a hazardous situation which, if not avoided,
could result in harm to your pet.
• Not for use with aggressive dogs. Do not use
this product if your dog is aggressive, or if your dog is
prone to aggressive behaviour. Aggressive dogs can
cause severe injury and even death to their owner
and others. If you are unsure whether this product
is appropriate for your dog, please consult your
veterinarian or certified trainer.
• Risk of explosion if battery is replaced by
an incorrect type. Do not short circuit, mix old
and new batteries, dispose of in fire, or expose to
water. When batteries are stored or disposed, they
must be protected from shorting. Dispose of spent
batteriesproperly.
• The PetSafe®Bark Control Collar is not a toy.
Keep away from the reach of children. Use it only for
its bark control purpose.

www.petsafe.net 3
DEITESNLFREN
Risk of skin damage. Please read and follow the
instructions in this manual. Proper fit of the collar is important.
A collar worn for too long or made too tight on the pet’s neck
may cause skin damage. Ranging from redness to pressure
ulcers; this condition is commonly known as bed sores.
• Avoid leaving the collar on the dog for more than 12 hours
per day.
• When possible reposition the collar on the pet’s neck
every 1 to 2 hours.
• Check the fit to prevent excessive pressure; follow the
instructions in this manual.
• Never connect a lead to the electronic collar; it will cause
excessive pressure on the contacts.
• When using a separate collar for a lead, don’t put
pressure on the electronic collar.
• Wash the dog’s neck area and the contacts of the collar
weekly with a damp cloth.
• Examine the contact area daily for signs of a rash or a sore.
• If a rash or sore is found, discontinue use of the collar until
the skin has healed.
• If the condition persists beyond 48 hours, see
yourveterinarian.
• For additional information on bed sores and pressure
necrosis, please visit our website.
These steps will help keep your pet safe and comfortable.
Millions of pets are comfortable while they wear stainless
steel contacts. Some pets are sensitive to contact pressure.
You may find after some time that your pet is very tolerant of
the collar. If so, you may relax some of these precautions. It
is important to continue daily checks of the contact area. If
redness or sores are found, discontinue use until the skin has
fully healed.
• The PetSafe®Bark Control Collar must be used only on
healthy dogs. We recommend that you take your dog to a
veterinarian before using the collar if he is not in good health.
• Do not shave the pet’s neck as this may increase the risk of
skin irritation.
• You should not make the collar any more tight than is
required for good contact. A collar that is too tight will
increase the risk of pressure necrosis in the contact area.

4 www.petsafe.net
ENFRNLESITDE
Thank you for choosing the PetSafe®brand. You and your pet deserve a
companionship that includes memorable moments and a shared understanding
together. Our products and training tools promote a lifestyle of protection, teaching,
and love—essentials that influence memories for a lifetime. If you have any
questions about our products or training your pet, please visit our
website at www.petsafe.net or contact our Customer Care Centre.
For a listing of Customer Care Centre telephone numbers, visit our
website at www.petsafe.net.
To get the most protection out of your warranty, please register your product within
30 days at www.petsafe.net. By registering and keeping your receipt, you will
enjoy the product’s full warranty and should you ever need to call the Customer
Care Centre, we will be able to help you faster. Most importantly, your valuable
information will never be given or sold to anyone. Complete warranty information is
available online at www.petsafe.net.
Table of Contents
Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
How the PetSafe® Big Dog Rechargeable Bark Control CollarWorks . . . . . . . . . . . 5
Key Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Charging the Bark Control Collar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Fit the Bark Control Collar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Choose Between Three Bark Control Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
What to Expect During Use of the Bark Control Collar. . . . . . . . . . . . . . . . . . . . . . . 11
Frequently Asked Questions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Terms of Use and Limitation ofLiability. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Important Recycling Advice. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

www.petsafe.net 5
DEITESNLFREN
Components
Features
• 10 Levels of progressive static stimulation
• Choose between 3 static stimulation modes to fit your dog’s temperament
• Rechargeable battery and Digital Display
• Patented Perfect Bark™technology ensures your dog's bark is the only sound that
will cause the static stimulation
• Waterproof
How the PetSafe® Big Dog
Rechargeable Bark Control
CollarWorks
The PetSafe®Big Dog Rechargeable Bark Control Collar uses several features
designed to shorten the training phase and promote good behaviour.
The Bark Control Collar has a unique patented sensor that provides the most reliable
bark detection available. The Bark Control Collar uses both vibration and sound
sensors (dual-detection) to discriminate each bark from other external noises. A static
stimulation is administered through the Contact Points only if both the vibration from
the vocal chords and the sound from the bark match the same criteria.
PetSafe®Big Dog
Rechargeable
Bark Control Collar
Universal Charging
Adaptor Operating Guide

6 www.petsafe.net
ENFRNLESITDE
Key Definitions
Digital Display: Displays the current static stimulation mode based on light
colour(s) and the numeric indicator. Also indicates the condition of the battery.
Settings Button: Adjusts the static stimulation mode and the level of static
stimulation your dog receives when barking. Also used to turn the Bark Control
Collar on and off.
Contact Points: Deliver the static stimulation.
Vibration Sensor Probe: Detects the vibrations of your dog’s barking.
Charging Jack: For connecting the universal charging adapter. Although the bark
control unit is waterproof, keep the rubber cover in place when not charging to keep
debris out of the opening.
Sound-Activated Sensor: Detects your dog’s bark.
Charging the Bark Control Collar
Before using the Bark Control Collar for the first time, be sure to
charge the unit by following the steps described below.
Follow these steps to charge the battery:
1. Lift the rubber cover protecting the Charging Jack.
2. Connect the charger connector from the universal charging adaptor to the
Charging Jack.
3. Plug the universal charging adaptor into a standard household electrical socket,
using the appropriate adaptor plug. The Digital Display light will flash the
sequence Green-Blue-Red to indicate that charging has started.
Digital Display Settings
Button
Contact Points Sound Activated Sensor
Charging Jack
(charger connector attached)
Vibration
Sensor Probe
(Top)
Digital Display Settings
Button
Contact Points Sound Activated Sensor
Vibration
Sensor Probe
(Bottom)
STEP 1

www.petsafe.net 7
DEITESNLFREN
4. During charging, keep the Bark Control Collar in an open, well-ventilated area.
The Digital Display light will flash red twice every 10 seconds to indicate that
charging is active.
5. When charging is complete, the universal charging adaptor will automatically
shut off, preventing overcharging. The Digital Display light will flash green twice
every 10 seconds to indicate that charging is complete. Note: The battery should
fully charge in less than 4 hours.
6. Remove the charger connector from the Charging Jack. The light will flash the
sequence Red-Blue-Green to indicate the unit is no longer charging.
7. When charging is complete, replace the Charging Jack rubber cover and unplug
the universal charging adaptor. The Bark Control Collar will automatically turn
off when the battery charger is connected. Following a charge, turn the unit back
on before using.
Note: When the unit indicates that the battery is low (battery icon on the Digital
Display indicates 1 bar or less and/or the light flashes red 3 times every 5 seconds)
it is time to recharge the unit. If the battery pack is very low (i.e. been used too
long or stored for an extended period of time) it may take some time for the unit to
indicate that charging has started. If the unit does not indicate that it is charging after
1 hour, please contact the Customer Care Centre.
Battery Life
Average battery life is 3 to 6 months, depending on how often your dog barks.
However, due to greater use during your dog’s training, your first battery charge
may not last as long. To conserve battery life, turn the Bark Control Collar off when
not in use.
Fit the Bark Control Collar
Important: The proper fit and placement of your Bark Control Collar is important
for effective operation. The Contact Points must have direct contact with your dog’s
skin on the underside of his neck.
To assure a proper fit, please follow these steps:
1. Make sure the Bark Control unit is off.
2. Have your dog standing comfortably (A).
3. Place the Bark Control Collar on your dog’s neck close to
the ears. Centre the Contact Points underneath your dog’s
neck, touching the skin (B).
STEP 2
A

8 www.petsafe.net
ENFRNLESITDE
Note: It is sometimes necessary to trim the
hair around the Contact Points to make sure
that contact is consistent.
Do not shave the pet’s neck as this may increase the risk
of skin irritation.
4. Check the tightness of the Bark Control Collar by inserting one finger between a
Contact Point and the dog’s neck (C). The fit should be snug but not constricting.
You should not make the collar any more tight than is
required for good contact. A collar that is too tight will
increase the risk of pressure necrosis in the contact area.
5. Allow your dog to wear the collar for several minutes, then recheck the fit. Check
the fit again as your dog becomes more comfortable with the Bark Control Collar.
Care and Cleaning
• Your dog’s neck and the Contact Points must be washed weekly with a damp cloth.
• Be sure that your pet’s neck is thoroughly dry before placing the Bark Control
Collar back on his neck.
Risk of skin damage.
• For comfort, safety and effectiveness of this product,
please ensure that you check the fit of your pet’s collar
frequently. If any skin irritation is observed, discontinue
the use of the collar for a few days. If the condition
persists beyond 48 hours, see your veterinarian.
• Do not attach a lead to the collar. This can result in
pulling the Contact Points too tightly against your pet’s
neck. Attach a lead to a separate, non-metallic collar
or harness, making sure the extra collar does not put
pressure on the Contact Points.
• Please refer to page 3 for additionalinformation.
BC

www.petsafe.net 9
DEITESNLFREN
STEP 3
Choose Between Three Bark
Control Settings
The Bark Control Collar has three bark control settings that allow you to choose how
the static stimulation is delivered. The modes are indicated on the Digital Display by
light colour(s) and the numeric indicator.
1. The patent pending Temperament Learning mode tracks the number of
static stimulations needed to substantially reduce (and in most cases eliminate)
the number of nuisance barks. The system provides 10 levels of static stimulation.
It begins with a low-level static stimulation (Level 0). However, if excessive
barking continues, the static stimulation intensity will increase with each
successive bark (to a maximum of Level 9) until the barking stops. This static
stimulation level becomes the starting level the next time the dog barks. Once
your dog has learned to reduce his barking, the initial warning static stimulations
are automatically reduced.
2. The Progressive Static Stimulation mode starts at the lowest level (Level 0)
and progresses to the next level (to a maximum of Level 9) each time your dog
barks within 30 seconds of the previous bark. If your dog does not bark again
within 30 seconds, the static stimulation level will automatically reset to Level 0.
3. The User-Selected Static Stimulation mode allows you to manually select
the static stimulation level (0-9). Note: In User-Selected mode, always start
training at the lowest level of correction (Level 0). Watch how your dog reacts,
and if necessary, progress to the next static stimulation level.
Note: As a built-in safety feature, if your dog barks 15 times or more within an 80
second period, the Bark Control Collar will automatically shut off for 3 minutes. This
safety feature is active in all three modes of operation.
Note: When the operating mode is changed, the static stimulation level is
automatically reset to Level 0.
Green lightGreen light
Blue light
Green light
Blue
light
Number
indicates
active static
stimulation
level
Temperament Learning Progressive Static Stimulation User-Selected Static Stimulation

10 www.petsafe.net
ENFRNLESITDE
The Bark Control Collar has a single Settings Button that allows you to turn the unit on
and off, display or change the current static stimulation mode, and change the static
stimulation level. The following table describes how to perform the different tasks.
Task Steps to perform Indications
Turn the
uniton Press and release the Settings Button while the
unit is off.
The light will flash green five
times and then display the
current static stimulation mode.
Turn the
unitoff Press the Settings Button until the Digital Display
goes blank and the red
light appears. Release the
Settings Button.*
The light will flash red four times
and the unit will turn off.
Display
current static
stimulation
mode
Press and hold the Settings
Button for less than 2
seconds before releasing it.
The unit will display the current
static stimulation mode and
battery condition.
Change
active static
stimulation
mode
1. Press and hold the
Settings Button for at
least 5 seconds.
Mode will advance and
bedisplayed.
2. Continue to hold the
Settings Button to
advance to the next
available mode.
Every 2 seconds the mode will
advance and be displayed.
3. When the desired mode
is displayed, release the
Settings Button.
The selected mode will be
displayed during this time.
4. Once the Settings Button
has been released for
5 seconds, the new
static stimulation mode
willactivate.
The Digital Display will flash four
times and the unit will resume
normal operation using the new
static stimulation mode.**
5. If the Settings Button
is released too early,
simply press it again
within 5 seconds.
The mode will advance and
continue as described in Step 2.
* If you continue to hold the Settings Button for more than 5 seconds, you will begin
changing the static stimulation mode. You must release the Settings Button before
attempting to turn off the unit.
** The light will flash every five seconds to indicate the current mode.