Phanteks GLACIER G3090Ti MSI BACKPLATE User manual

PACKAGE CONTENTSFor latestversion check www.Phanteks.com
INSTALLATION GUIDE V1.0PH-GB3090TIMSBP_BK01/CR01
GLAC IER G3090Ti MSI BACKPLATE
WARNING - This product is intended for advanced users. Improper installation may result in damage to your equipment.While all eorts
have been made to provide the most comprehensive information possible, Phanteks assumes no liability expressed or implied for any damage(s)
occurring to your components as a result of using Phanteks cooling products, either due to mistake or omission on our part in the below
instructions, or due to failure or defect in the Phanteks cooling products. Do not disassemble the water block. Warranty will be voided.
Turn o the power to your system and discharge your body’s static electric charge before proceeding with the installation procedure. If you do not
feel comfortable with performing the installation procedure, consult a qualied computer technician.
GLACIER BACKPLATE
QTY: 1
This product requires the PH-GB3090TIMS GPU water block. Please follow step 1 to 3 of the GPU
water block’s installation guide before proceeding.
M2.5x8 Flush Screws
QTY: 11
Thermal Pads
QTY: 2
FINISH STEPS 1 TO 3 FROM THE WATER BLOCK INSTALLATION GUIDE BEFORE PROCEEDING:
STEP 4. APPLYING THERMAL PADS
Remove the protective lm and place the
thermal pads on the correct position on
the backplate.
Make sure to remove the protective lm on
both sides of the thermal pads.
1
1
2 3
4
5
1
1
2 3
4
5
11
2
3
45

11x
STEP 5. INSTALL THE GLACIER BACKPLATE
Carefully position the backplate onto the
graphics card. Align the mounting holes on
the PCB with the holes on the backplate.
Secure the backplate with 11 M2.5x8mm
ush screws to the PCB.
STEP 6. CONNECT D-RGB LIGHTING
Connect the D-RGB cable to the D-RGB strip
in the water block.
STEP 7. INSTALLING FITTINGS
Install G1/4 threaded male ttings and
close the remaining ports with the two
included Stop Fittings.
Connect to
Phanteks Case / Motherboard Cable
Always perform a leak test before providing
power to any system components.
You can connect the D-RGB cable to a
compatible motherboard with the D-RGB
Motherboard Adapter.
All Phanteks D-RGB products can be
daisy-chained together.
D-RGB Motherboard Adapter