Philips AVENT SCF355/00 User manual

SCF355
Specications are subject to change without notice
© 2018 Koninklijke Philips N.V.
All rights reserved
4213 342 20558

2 3 4 5
67 8 9
10 11 12 13
14 15 16
1

SCF355
ENGLISH 6
БЪЛГАРСКИ 17
ČEŠTINA 28
EESTI 39
MAGYAR 50
ҚАЗАҚША 62
POLSKI 73
РУССКИЙ 85

6
General description (Fig. 1)
1. Bottle warmer
2. Light
3. Settings knob
4. O setting
5. Defrost setting
6. Keep warm setting
7. Express milk warming setting for contents up to
180ml/6oz
8. Food warming setting
9. Express milk warming setting for contents over and
including 180ml/6oz
Important
To fully benet from the support that Philips
oers, register your appliance at
www.philips.com/welcome. Read this user
manual carefully before you use the bottle
warmer and save it for future reference.
Danger
- Do not immerse the cord, plug or
appliance in water or other liquid.
Warning
- Only use the appliance indoors.
- Do not let the mains cord hang over the
edge of a table or worktop. Excess cord
can be stored in the base of the bottle
warmer.
- Keep the mains cord away from hot
surfaces.
ENGLISH

7
- Only connect the appliance to an earthed
wall socket. Always make sure that the
plug is inserted into the wall socket
properly.
- Check if the voltage indicated on the
bottom of the appliance corresponds to
the local mains voltage before you
connect the appliance.
- If you need to use an extension cord,
make sure it is an earthed extension cord
with a rating of at least 13 amperes.
- Do not use the appliance if the plug, the
mains cord or the appliance itself is
damaged. If the mains cord is damaged,
you must have it replaced by Philips,
a service centre authorised by Philips or
similarly qualied persons in order to avoid
a hazard.
- Do not place the appliance on or near a
hot gas or electric cooker, or in a heated
oven.
- This appliances can be used by persons
with reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning use
of the appliance in a safe way and
understand the hazards involved.
ENGLISH

8
- Cleaning and user maintenance shall not
be made by children.
- This appliance shall not be used by
children. Keep the appliance and its cord
out of reach of children.
- Children shall not play with the appliance.
- Do not spill water on the mains plug.
- Only use the appliance as described in
the user manual to avoid potential injury
due to misuse.
- Do not preheat the appliance.
- Always place a fully assembled bottle
with cap in the bottle warmer before you
add water.
- Make sure you add water before you
switch on the bottle warmer.
- Hot water can cause serious burns. Be
careful when the bottle warmer contains
hot water.
- The accessible surfaces of the appliance
may become hot during use and are
subject to residual heat after use.
- Do not move the appliance when it
contains hot water.
- When the food or milk has reached the
required temperature, remove the bottle or
container from the bottle warmer. If you leave
food or milk in the bottle warmer, the
temperature of the food or milk increases.
ENGLISH

9
- Always check the food temperature
before you feed your child.
Caution
- This appliance is intended to be used in
household and similar applications such
as farm houses, bed and breakfast type
environments, sta kitchen areas in
shops, oces and other working
environments, and by clients in hotels,
motels and other residential type
environments.
- Unplug the appliance when it is not
in use.
- The surface of the heating element is
subject to residual heat after use.
- Let the appliance cool down before you
clean it.
- Follow the descaling instructions to avoid
irreparable damage.
- Do not try to open or repair the appliance
yourself. You can contact the Philips
Consumer Care Centre in your country
(see www.philips.com/support).
- The food should not be heated for too
long.
You can nd the production date code
YYWW in the cord storage compartment in
the base of the bottle warmer.
ENGLISH

10 ENGLISH
Electromagnetic elds (EMF)
This Philips appliance complies with all applicable standards
and regulations regarding exposure to electromagnetic elds.
Using the bottle warmer
With this bottle warmer, you can safely warm all Philips Avent
feeding bottles and milk/baby food in containers and other
baby food jars.
Note: Philips Avent breast milk bags and Philips Avent
2oz/60ml bottles cannot be used in this bottle warmer.
Explanation of settings
- O setting: The bottle warmer is switched o and the light
is o. On every other setting, the appliance is switched on
and the light is lit (Fig. 2).
- Express milk warming setting for contents up to 180ml/6oz:
Select this setting when you want to quickly warm a bottle of
milk with a content up to 180ml/6oz.
The bottle has to be taken out immediately after warming
to the right temperature, otherwise the milk will be
overheated.
- Food warming setting: Select this setting when you want
to warm a container/jar of baby food.
- Express milk warming setting for contents over and
including 180ml/6oz:
Select this setting when you want to quickly warm a bottle
of milk with a content over and including 180ml/6oz.
The bottle needs to be taken out immediately after
warming to the right temperature, otherwise the milk will
be overheated.
- Keep warm setting: Milk is warmed at a slower speed and
be kept at right temperature.
- Defrost setting: Defrost a bottle/container of milk/baby
food to liquid state. No warming occurs.

11
ENGLISH
Using the bottle warmer with express milk warming
setting
1 Put the mains plug in the wall socket (Fig. 3).
2 Place a bottle in the bottle warmer (Fig. 4).
3 Fill the bottle warmer with drinking water up to the level
of the milk in the bottle. In case of large amounts of milk,
the maximum level of water is approximately 1 cm below
the top of the bottle warmer. An accurate water level
ensures correct warming performance (Fig. 5).
4 Select the desired setting based on the milk volume. See
the express warming reference table at the end of this
chapter to check how long the milk needs to be warmed
in the selected setting (Fig. 6).
Note: The speed of warming milk depends on the amount of
the milk warmed and on its initial temperature, i.e. room
temperature (20°C) or fridge temperature (5°C).
5 The orange light goes on when you select a setting. This
indicates that the bottle warmer is on (Fig. 7).
Note: Whilst warming the milk circulates and heats evenly.
6Check the express warming reference table for the time
required to warm the milk. Remove the bottle from the
bottle warmer after the time indicated in the express
warming reference table has passed (Fig. 8).
Tip: When you nd the milk is not warm enough, you can
place the bottle back into the appliance for a maximum of
30 seconds of extra warming. This will create a slightly
warmer result but without overheating.
Caution: If you leave the bottle in the bottle warmer longer
than the time indicated in the settings table, the milk may
become overheated.
Note: If you overheat breast milk, valuable nutrients and
vitamins may be lost.

12 ENGLISH
7 Always check the temperature before you feed your
baby. Gently shake the bottle or milk storage container and
check the temperature of the milk by sprinkling a few drops
on the inside of your wrist (Fig. 9).
8 Turn the knob back to the ‘o’ position (Fig. 10).
Caution: The water in the bottle warmer might be hot after
nishing warming milk / baby food. Be careful that hot water
can cause serious burns.
If you do not turn the knob back to the ‘o’ position, the
water keeps heating up and will reach a very high
temperature.
Express warming reference table
ml/oz min min
5°C/40°F 20°C/70°F
60 ml/2 oz-90 ml/3 oz 4.5 3.0
90 ml/3 oz-110 ml/3.7 oz 5.5 3.0
125 ml/4 oz-150 ml/5 oz 3.5 3.0
180 ml/6 oz-210 ml/7 oz 5.5 4.0
240 ml/8 oz-260 ml/9 oz 7.0 4.5
290 ml/10 oz-330 ml/11 oz 7.5 5.0
Note: The indicated warming times are based on Philips
Avent Classic and Natural PP bottle ranges. Be aware that
warming timings of Philips Avent standard bottles and glass
bottles deviate from these indications. The characteristics of
bottles such as material or thickness may also impact the
warming times, therefore it may take less time to warm a
larger volume of milk.