Philips DC190/79 User manual

1
Quick start guide
EN
What’s in the box
2
Connect
Setup
Enjoy
3
© Royal Philips Electronics N.V. 2009
All rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
Printed in China
DC190_79_QSG_V1.0
Quick Start Guide
Quick Start Guide
User Manual
User Manual
Register your product and get support at
www.philips.com/welcome DC190
Docking Entertainment System
Main unit Power adaptor MP3 link cable
1Connect
Connect power
A
1Connect the power adaptor to
the• DC IN jack on the rear of the
main unit
the power socket.•
DC190_79_QSG_EN.indd 2-4DC190_79_QSG_EN.indd 2-4 6/1/2009 11:03:08 AM6/1/2009 11:03:08 AM

Setup
2
1 In standby mode, press and hold TIME
SET/AUTO SCAN for 2 seconds.
» The hour digits begin to blink.
2 Press TUNING +/- to set the hour.
3 Press TIME SET/AUTO SCAN.
» The minute digits begin to blink.
4Press TUNING +/- to set the minute.
5Press TIME SET/AUTO SCAN to
confirm.
» The week day digits begin to blink.
6Press TUNING +/- to set the week day.
7Press TIME SET/AUTO SCAN to
confirm.
Set clock
A
1In the tuner mode, press and hold TIME
SET/AUTO SCAN for more than 2
seconds to activate automatic program
mode.
» All available stations are programmed
in the order of waveband reception
strength.
» The first programmed radio station is
broadcast automatically.
2Press PRESET +/- to select a preset
number.
E Tip
Detailed functions and features are•
described in the user manual.
Program and listen to radio
stations
APlay from iPod B
Setup
2
Set the alarm timer
BSet alarm mode
1Adjust the WAKE TO iPod/RADIO/
BUZZ control to select the source for
the alarm.
» When the alarm time comes, the
selected iPod, radio or buzzer turns on.
Activate and deactivate the alarm timer
1Press ALARM 1 or ALARM 2 repeatedly
to activate the timer.
» If the timer is activated, or
is displayed.
To deactivate the alarm timer, press•
ALARM 1 or ALARM 2 repeatedly
until is displayed.
» If the timer is deactivated, or
disappears.
Repeat alarm
1When the alarm rings, press REPEAT
ALARM/BRIGHTNESS CONTROL.
» The alarm repeats ringing minutes later.
E Tip
You can press• TUNING+/- to adjust
interval to repeat alarm.
Stop alarm ring
1When the alarm rings, press the
corresponding ALARM 1 or ALARM 2.
» The alarm stops but the alarm settings
remain.
1Push to open the dock compartment.
2Place the iPod in the dock.
3 Press SOURCE repeatedly to select iPod
source.
» The connected iPod plays automatically.
To pause/resume play,press• .
To skip to a track, press• / .
To search during play, press and hold•
/ , then release to resume normal play.
Enjoy
2
3
1Ensure that you have set the clock
correctly.
2 Press and hold ALARM 1or ALARM 2
for 2 seconds.
» or and hour digits begin to
blink.
3Press TUNING +/- repeatedly to set the
hour.
4Press ALARM 1 or ALARM 2 to
confirm.
» or and minute digits begin
to blink.
5Repeat steps 3-4 to set the minute.
6Repeat steps 3-4 to select whether to ring
alarm on weekdays or at weekend.
» “L XX(volume level)” begins to blink.
7Repeat steps 3-4 to set the maximum alarm
volume.
DC190_79_QSG_EN.indd 5-7DC190_79_QSG_EN.indd 5-7 6/1/2009 11:03:19 AM6/1/2009 11:03:19 AM