Philips CB1551B Instruction manual

Register your product and get support at CD150
www.philips.com/welcome CD155
Call from the phonebook
1. Press din idle mode.
2. Scroll :to a phonebook entry.
3. Press r.
The call is initiated.
Listen to messages recorded on the answering machine (for CD155 only)
Press oon the base station to turn on the answering machine (the LED is turned on).
Press oagain to turn off the answering machine (the LED is turned off).
Press pon the base station to play phone messages (the first recorded message
will be played first).
Press sto skip the current message and play the next message.
Press Rto go back to the previous message (if pressed within 1 second of current
message playback).
Press Rto replay current message (if pressed after 1 second of current message
playback).
Press -+ to adjust speaker volume during message playback.
Press fto delete the current message.
Refer to your CD155 User Manual for details about the answering machine function.
Troubleshooting
For more information, please refer to the User Manual that came with your
phone.
Welcome to Philips!
Register your product and get support at
www.philips.com/welcome
Need help?
User Manual
Refer to the User Manual that came with your CD150/155.
Online help
www.philips.com/support
Problem Solution
• There’s no dialling tone! • Check the connections
• Charge the batteries
• Use the line cable provided
• Caller cannot hear me
clearly!
• Move closer to the base station
• Move the base station at least one metre away
from any electrical appliances
• SEARCHING... is
displayed on handset and
icon is blinking!
• Move closer to the base station
• Reset your unit and restart the handset registration
• Calller number is not
displayed!
• Check your subscription with your network
operator
©2008 Koninklijke Philips Electronics N.V.
All rights reserved.
Reproduction in whole or in part is prohibited without the written consent of
the copyright owner.
Document number: 3111 285 42441 (US-EN) Printed in China
Connect
Install
Enjoy
1
2
3
Quick start guide
All manuals and user guides at all-guides.com
all-guides.com

Enjoy
3
Make a call
Dial the number (maximum 24 digits) and press rkey.
OR
Press ror vkey to take the line and dial the number (maximum 24 digits).
Answer a call
When the phone rings, press rkey.
End a call
To end a conversation, press ekey.
Adjust earpiece volume
During a call, press :to select from VOLUME 1, VOLUME 2 or VOLUME 3,
Store a contact in the phonebook
1. Press mkey in idle mode, scroll :to PHONEBOOK and press <OK, press
<OK to enter NEW ENTRY.
2. ENTER NAME is displayed on the screen.
3. Enter the name of the contact (maximum 12 characters) and press <OK.
4. Enter the number (maximum 24 digits) and press <OK.
A validation tone is emitted.
Access the phonebook
1. Press din idle mode and scroll :to browse the phonebook.
2. To view the details, press <OK.
Set the ring melody
1. Press mkey in idle mode, scroll :to PERSONAL SET and press <OK,
scroll :to HANDSET TONES and press <OK, scroll :to RING
TONES and press <OK.
2. Scroll : to your desired melody to play the melody.
3. Press <OK to set the ring melody.
A validation tone is emitted and the screen returns to previous menu.
What’s in the box
Handset
Base station with
bracket for CD150
OR
Power supply2 AAA rechargeable
NiMH batteries
Battery door
GuaranteeUser manual
*You may find in the box the line adaptor delivered separately from the line cable. In this
case, you have to connect the line adaptor to the line cord first before plugging the line
cord to the line socket.
In multihandset packs, you will find one or more additional handsets, chargers with power
supply units and additional rechargeable batteries.
WARNING Always use the cables and batteries that came with your phone.
Quick Start Guide
Line cord*
CD155
Belt clip
Connect
Connect the base station
Install
Insert rechargeable batteries and charge
1
1. Place the base station in a central location near the telephone line socket and electricity socket.
2. Connect the line cord and the power cable to their corresponding connectors at the
back of the base station.
3. Connect the other end of the line cord and power cable to their respective sockets.
2
Insert batteries Charge handset for 24 hours
All manuals and user guides at all-guides.com