Phonak WatchPilot 2 User manual

hearing systems
Remote Control
WatchPilotTM2
User Guide

Welcome to the Phonak world of communication!
Congratulations on choosing WatchPilot2.
The WatchPilot2 is a convenient and discreet remote control. It is also an elegant,
water-resistant, Swiss quality watch. It provides an easy way for you to select the
programs of your hearing instruments and to quickly adjust them to the most
comfortable volume.
Please read this user guide carefully and contact your hearing care professional if you
have any questions.
Phonak – the leader in hearing instrument technology!

Description
1. Program selection (... ➝A➝1➝2➝3➝... )
2. Volume up
3. Volume down
4. FM mode selection (... ➝FM➝FM+M➝... )
5. Crown for adjustment of watch settings
6. LED indicator
7. Date display (men’s model only)
2
1
6
3
5
7
4
2
1
6
3
5
4

Main features
• Swiss quality movement
• Rugged, scratch-proof sapphire glass
• Case and wristband made of durable stainless steel
• Caseback made of metallized mineral glass
• Water-resistant to 30 m
• Remote control range approx. 30 cm
• Date display (men’s model only)

3
Closing and opening the wristband
• Closing
Press the wristband onto the clasp.
• Opening
Press both buttons simultaneously.
1
1
1

4
Hold the WatchPilot2 so that you can conveniently read the time . The distance
between the WatchPilot2 and your hearing instruments should be about 30 cm. Press
the appropriate button on the WatchPilot2 until the red LED indicator on the dial
flashes briefly.
Both hearing instruments are controlled simultaneously.
Your hearing instruments must be switched on to receive the commands from your
WatchPilot2.
1
LED Indicator
1
Remote control of hearing instruments

5
By pressing the “PRGM” button , you can activate the next program of your hearing
instruments. The “FM/FM+M” button is enabled if your hearing instruments are
equipped with FM receivers. By pressing this button, you can toggle between “FM” (the
wireless microphone is active, the microphones in the hearing instruments are inactive)
and “FM+M” (both the wireless microphone and the microphones in the hearing
instruments are active). When you press the “PRGM” button after the “FM/FM+M”
button, your hearing instruments will be reset to the program which was active before
you pressed “FM/FM+M”.
2
1
Program selection
2
1
2
1

6
Press the “VOL+” button to increase the volume incrementally.
Press the “VOL–” button to decrease the volume incrementally.
Volume adjustment
1
2
1
2
1
2

7
Setting the date
The men’s model has a date display.
• Pull the crown out to the first position .
• Turn the crown clockwise until the correct date appears.
• Press the crown back home .
2
1
1
2

8
Setting the time
• Pull the crown to the outermost position .
• Turn the crown clockwise until the correct time is set.
• Press the crown back home .
2
1
1
2