Phonak Virto B-Titanium Series Setup guide

Government Services
DALC Training Guide
Spring 2017
Sections:
Hearing Instruments
Features
Apps
Accessories
Roger
Other Resources
If you need any
other assistance
please contact us
at 888-561-7555
Includes Current Contract Phonak Product Families:
Bolero B
Virto B-Titanium
Audéo B
CROS B CROS II
Virto V Accessories
Audéo V Bolero V
Naída V

Government Services
DALC Training Guide
Spring 2017
Hearing Instruments
Fitting Software 1
In-The-Ear Custom Products 2
Receiver-In-Canal Products 6
Behind-The-Ear Products 14
CROS Products 23
Features
Belong Features 41
Venture Features 43
Tinnitus Balance Portfolio 44
Apps
RemoteControl App 47
Accessories
PilotOne II 59
ComPilot II 61
ComPilot Air II 66
DECT II Phone 69
Accessories (continued)
EasyCall II 73
TVLink II 78
RemoteMic 81
Cross Reference/Parts and Pieces 83
Roger
Wireless Technology 86
Roger Pen/EasyPen 87
Roger Clip-On Mic 93
Roger Receivers 97
Replacement Parts 102
Other Resources
Helpful Resource Movies 103
Additional Parts and Accessories 105
Notes Pages 127
Table of Contents:

Phonak VA DALC Training Guide 1
Phonak Target™ 5.1
Fitting software is required to t these devices, and can be downloaded within your existing Target software. If you require
a hard copy, please contact Phonak Customer Service.
Waking up the device
Devices are sent to you in “sleep” mode. To “wake” the devices, simply insert into a charger for 2 seconds. Devices are
shipped with a partial charge. We recommend charging prior to tting.
iCube II
iCube II is required to program these devices. Be sure to turn the devices on (long press of the push button, the LED light
will blink 1x) before connecting to iCube II.
Phonak Audéo™B-R and Bolero B-PR

2 Phonak VA DALC Training Guide
Target 5.1 or higher
Fitting Software
iCube II, NOAHLink, Hi Pro, HI Pro 2, Programming Cables
Interfaces
Phonak CROS w/ iCube
Phonak Virto V Nano, Phonak Virto Q Nano, Phonak Ambra Nano:
• Programming cables, CPC/custom programming codes found in the miscellaneous section, page 3 of ROES digital
hearing aid
Audéo Q 10 RIC, Programming cables
Interface Exceptions
If you need to program hearing instruments outside of the
client’s ears (e.g. to prepare the hearing instruments before a
fitting session), place the hearing instruments on a at surface
and put the neckloop of iCube II around them as shown in
the picture.
Programming Hearing Instruments on your Desk
This training guide only includes materials for active contract products. For prior
contract products, information is available on Phonak Pro (www.phonakpro.com)
under the resource tab. Select literature and then search by product.

Phonak VA DALC Training Guide 3
Virto B-Titanium Product Description
Power level
M
P
SP
Hardware configuration / options / technology
Battery size
Push button (for program or volume change)
EasyPhone (for acoustic phone)
MiniControl1(for program or volume change)
Telecoil2
Microphone technology
IP rating
Phonak Virto B90Titanium
•
•
•
10
optional
optional
optional
optional
Omni
IP683
In-The-Ear (ITE) Custom Products
Mild to Moderately-
Severe Hearing Loss
Mild to Severe
Hearing Loss
Mild to Severe
Hearing Loss
Mild to Profound
Hearing Loss
Invisible-In-Canal
(IIC)
Completely-In-Canal
(CIC)
In-The-Canal (ITC)/
Half Shell (HS)
Full Shell
(FS)
1 Only available without push button
2 Will increase size of device
3 IP68 indicates that the hearing aid is water resistant and dust tight. It survived continuous immersion in 1 meter of water for 60 minutes and 8 hours in a dust chamber as per the
IEC60529 standard. No traces of dust were evident within the housing.

4 Phonak VA DALC Training Guide
Power level
Maximum Power Output (dB SPL)
Maximum gain (dB)
Frequency range (Hz)
Working current (mA)
Fitting range
2cc coupler
Ear simulator
2cc coupler
Ear simulator
2cc coupler
M
109
120
40
50
<100 - 7000
0.9
P
115
125
50
60
<100 - 6700
0.9
SP
119
129
60
70
<100 - 7000
1.2
For moderate to
severe hearing loss,
all audiometric
configurations
For mild to
moderately-severe
hearing loss, all
audiometric
configurations
For mild to
moderate hearing
loss, all audiometric
configurations
Technical Data
Shell styles
IIC / CIC
Shell color Faceplate color
Colors
BlackTitanium Gray

Phonak VA DALC Training Guide 5
Virto V Product Description
Power level
M
P
SP
UP
Hardware configuration / options / technology
Default shell style
Battery size
Push button (program / volume)
Volume control (wheel)
Telecoil
EasyPhone
Microphone technology
Wireless (connectivity & QuickSync)
Binaural VoiceStream Technology™
CROS II Custom compatibility
Phonak
Virto V90 IIC
Phonak
Virto V90 CIC
Phonak
Virto V90 HS
Phonak
Virto V90 FS
•
IIC
10
•
Omni
•
•
•
CIC
10
•
•
•
Omni
•
•
•
•
•
HS
312 (or 13)
•
•
•
•
Directional
•
•
•
•
•
•
•
FS
13 (or 312)
•
•
•
•
Directional
•
•
•
Phonak
Virto V90 CA
•
•
•
•(312 battery only)
CA
312 (or 10)
•
•
Optional
•
Directional
•
•
•
Virto B Features
Programs (Automatic)
AutoSense OS
Additional programs
Features
FlexControl
FlexVolume
SoundRecover 2
User Preference Tuning
Fine-tuning channels
WhistleBlock
NoiseBlock
WindBlock
EchoBlock
SoundRelax
AOV & AOV-O
Tinnitus Balance
auto Acclimatization
Premium
•
•
•
•
•
•
5
•
•
•
•
•
•
•
•
•
•
20
•
•
•
•
•
•
•
•
Calm Situation
Speech in Noise
Comfort in Noise
Music
Speech in Car
Comfort in Echo
Max. additional programs
Comfort in Echo
Calm Situation
Comfort in Noise
Music
Acoustic phone
Custom program

6 Phonak VA DALC Training Guide
Virto V Features
Programs (Automatic)
AutoSense OS
Features
UltraZoom
SNR-Boost
FlexControl
FlexVolume
DuoPhone*
SoundRecover
User Preference Tuning
Fine Tuning Channels
WhistleBlock
NoiseBlock
WindBlock
EchoBlock
SoundRelax
QuickSync
AOV
Tinnitus Balance
auto Acclimatization
Premium
•
•
•
•
•
•
•
Premium
•
•
•
•
•
•
20
•
•
•
•
•
•
•
•
•
Calm Situation
Speech in Noise
Comfort in Noise
Music
Speech in Loud Noise*
Speech in Car
Comfort in Echo
*Binaural VoiceStream
Technology™ —
bilateral fitting required
Additional programs (Manual)
Streaming programs
5
•
•
•
•
•
•
•
•
•
4
•
•
•
•
Max. additional programs
Speech in Wind*
Comfort in Echo
Speech in Loud Noise*
Speech in 360°*
Speech in Noise
Calm Situation
Comfort in Noise
Music
Acoustic phone
Max. streaming programs
Bluetooth audio + mic
Bluetooth phone / DECT + mic
RemoteMic / Roger
Audio jack
Power level
Maximum Power Output (dB SPL)
Maximum gain (dB)
Frequency range (Hz)
Working current (mA)
Fitting range
2cc coupler
Ear simulator
2cc coupler
Ear simulator
2cc coupler
UP
130
135
70
78
<100 - 5200
1.2
M
112
120
40
50
<100 - 7000
1.2
P
118
125
50
60
<100 - 6700
1.1
SP
122
129
60
70
<100 - 7000
1.2
For moderate to
profound hearing
loss, all audiometric
configurations
For moderate to
severe hearing loss,
all audiometric
configurations
For mild to
moderately-severe
hearing loss, all
audiometric
configurations
For mild to
moderate hearing
loss, all audiometric
configurations
Technical Data
Colors
Shell colorsFaceplate colors
Tan Cocoa Pink
Red
Transparent
Brown
Blue
Transparent
White Transparent
26 28
2119 36 37
14 22
Tan
14
Black
(IIC only)
06
Brown
28
Pink
26
Cocoa
22

Phonak VA DALC Training Guide 7
Battery Door Virto B 10L
004-2440-061 BLACK
Battery Door Virto B 10R
004-2441-061 BLACK
Battery Door Virto V 10L
004-2440-141 TAN
004-2440-221 COCOA
004-2440-261 PINK
004-2440-281 BROWN
Battery Door Virto V 10R
004-2441-141 TAN
004-2441-221 COCOA
004-2441-261 PINK
004-2441-281 BROWN
Battery Door Virto V 312L
004-2442-141 TAN
004-2442-221 COCOA
004-2442-261 PINK
004-2442-281 BROWN
Battery Door Virto V 312R
004-2443-141 TAN
004-2443-221 COCOA
004-2443-261 PINK
004-2443-281 BROWN
Battery Door Virto V 13L
004-2444-141 TAN
004-2444-221 COCOA
004-2444-261 PINK
004-2444-281 BROWN
Battery Door Virto V 13R
004-2445-141 TAN
004-2445-221 COCOA
004-2445-261 PINK
004-2445-281 BROWN
Battery Door PB Virto V 10L
042-0093-061 BLACK
042-0093-141 TAN
042-0093-221 COCOA
042-0093-261 PINK
042-0093-281 BROWN
Battery Door PB Virto V 10R
042-0094-061 BLACK
042-0094-141 TAN
042-0094-221 COCOA
042-0094-261 PINK
042-0094-281 BROWN
Battery Door Virto Nano L
004-8263-141 TAN
004-8263-221 COCOA
004-8263-261 PINK
004-8263-281 BROWN
Battery Door Virto Nano R
004-8264-141 TAN
004-8264-221 COCOA
004-8264-261 PINK
004-8264-281 BROWN
ITE Battery Doors

8 Phonak VA DALC Training Guide
Virto B-Titanium User Guide
Left & right hearing aid markings
Changing batteries
Blue marking for left
hearing aid.
Red marking for right
hearing aid.
Remove the
sticker from the
new battery
and wait two
minutes.
Left Right
Open the
battery door.
Place battery in the
battery door with the
“+” symbol facing
upwards.
1 2 3
On/O
Push button
Models with this option only:
The push button on your hearing aid
can have various functions.
OOn
The picture below shows the model described in this user guide.
Virto B-Titanium
Custom made
shell
Battery door
Push button
(optional)
Removal handle
Sound outlet / wax protection system
Left & right hearing aid markings
There is a red or blue inlay in the battery door to tell you if it is a
left or a right hearing aid.
Blue marking for left hearing aid.
Red marking for right hearing aid.
On/O
The battery door is also the on/o switch.
12
Closed battery door = hearing aid is on Opened battery door = hearing aid is o
When you switch on the hearing aid you may hear a start-up melody.
Parts of the Hearing Aid