PICO PicoScope 6000E Series User manual

PicoScope®6000E Series
QUICK START GUIDE
KURZANLEITUNG
GUÍA DE INICIO RÁPIDO
GUIDE DE DÉMARRAGE RAPIDE
󻯏󻛧󾖴󼁋󼔀󾖴󺥯󼓣󻉋
GUIDA DI AVVIO RAPIDO
クイックスタートガイド
快速入门指南
www.picotech.com/downloads
Ultra-deep memory oscilloscopes

www.picotech.com/downloads
DOWNLOAD THE PICOSCOPE SOFTWARE FROM:
LADEN SIE DIE PICOSCOPE-SOFTWARE HERUNTER:
DESCARGUE EL SOFTWARE PICOSCOPE DE:
TÉLÉCHARGEZ LE LOGICIEL PICOSCOPE À PARTIR DU LIEN:
󻻻󽉳󽀧󼑗󼌣󾖴󻁓󼐣󻗋󻉋
SCARICA IL SOFTWARE PICOSCOPE DAL LINK:
PICOSCOPE ソフトウェアのダウンロード:
从以下网址下载 PICOSCOPE 软件:

iDO338-3 Copyright © 2020 Pico Technology Ltd. All rights reserved.
Quick Start Guide PicoScope 6000E Series oscilloscopes
Contents
English........................................................................................................................................... 1
Introduction ................................................................................................................................................................... 1
Step 1: Install the PicoScope software........................................................................................................................ 2
Step 2: Safety and conformance information ............................................................................................................. 2
Step 3: Connect your oscilloscope............................................................................................................................... 7
Useful information ........................................................................................................................................................ 9
Deutsch ....................................................................................................................................... 10
Einführung.................................................................................................................................................................... 10
1. Schritt: Die PicoScope-Software installieren......................................................................................................... 11
2. Schritt: Informationen zu Sicherheit und Konformität.......................................................................................... 11
3. Schritt: Anschluss des Oszilloskops...................................................................................................................... 16
Praktische Hinweise.................................................................................................................................................... 18
Español ....................................................................................................................................... 19
Introducción................................................................................................................................................................. 19
Paso 1: Instalación del software PicoScope............................................................................................................. 20
Paso 2: Información de seguridad y conformidad.................................................................................................... 20
Paso 3: Conectar el osciloscopio............................................................................................................................... 25
Información útil ........................................................................................................................................................... 27
Français....................................................................................................................................... 28
Introduction ................................................................................................................................................................. 28
Étape 1: Installation du logiciel PicoScope ............................................................................................................... 29
Étape 2: Informations de sécurité et de conformité ................................................................................................. 29
Étape 3: Connectez votre oscilloscope...................................................................................................................... 34
Informations utiles...................................................................................................................................................... 36
󽋋󺫜󼌣 
󻻻󺦋 
󻁗󺨳󻻻󽉳󽀧󼑗󼌣󾖴󻺓󼯇 
󻁗󺨳󼊷󼕳󾖴󻥾󾖴󺭋󺨘󾖴󼖄󻩣 
󻁗󺨳󼎓󼁓󻗋󼀓󼳃󽉳󾖴󼍟󺨟 
󼒏󼐘󽋋󾖴󼖄󻩣 
Italiano ........................................................................................................................................ 46
Introduzione................................................................................................................................................................. 46
Passo 1: Installare il software PicoScope ................................................................................................................. 47
Passo 2: Informazioni sulla sicurezza e sulla conformità........................................................................................ 47
Passo 3: Collegare l'oscilloscopio.............................................................................................................................. 52
Informazioni utili ......................................................................................................................................................... 54

ii DO338-3 Copyright © 2020 Pico Technology Ltd. All rights reserved.
Quick Start Guide
PicoScope 6000E Series oscilloscopes
󴀩󴉅󸑣 
はじめに .............................................................................................................................................................. 55
手順1: PicoScopeソフトウェアのインストール ....................................................................................................... 56
手順2: 安全および適合性に関する情報 ................................................................................................................ 56
手順3: オシロスコープの接続 ............................................................................................................................... 61
お役立ち情報 .......................................................................................................................................................63
󶘮󱠅󱙆󳽳 
简介 ..................................................................................................................................................................... 64
步骤 1: 安装 PicoScope 软件 ............................................................................................................................... 65
步骤 2: 安全和合规信息 ....................................................................................................................................... 65
步骤 3: 连接示波器 .............................................................................................................................................. 70
有用信息 .............................................................................................................................................................. 72

1
DO338-3 Copyright © 2020 Pico Technology Ltd. All rights reserved.
Quick Start Guide PicoScope 6000E Series oscilloscopes
English
Introduction
Thank you for purchasing a PicoScope6000E Series PC oscilloscope. This guide explains how to install the
PicoScope software and connect the oscilloscope to your computer. It also contains important safety information
and advice on accessing user manuals and technical support.
This guide covers the following models. Documentation for other Pico products is available from
picotech.com/downloads.
Analog
channels Resolution Bandwidth Capture memory (shared between active channels)
PicoScope 6824E 88, 10 or 12 bits, FlexRes®500 MHz 4 GS
(2GS at 10-/12-bit)[1]
PicoScope 6424E 48, 10 or 12 bits, FlexRes®500 MHz 4 GS
(2GS at 10-/12-bit)[1]
PicoScope 6804E 88 bits, xed 500 MHz 2GS
PicoScope 6404E 48 bits, xed 500 MHz 2 GS
PicoScope 6403E 48 bits, xed 300 MHz 1 GS
[1] For more information on maximum capture duration and permitted channel combinations, refer to the PicoScope
6000E Series Data Sheet.
This oscilloscope is intended for the measurement of electrical signals up to the limits specied in this guide and in
the PicoScope 6000E Series Data Sheet. For safe limits of accessories, please refer to the documentation supplied by
the manufacturer.
For further information on the software, please refer to the User’s Guide available from the Help menu within the
the PicoScope software. For technical data relating to the oscilloscope itself, see the PicoScope 6000E Series Data
Sheet, available from picotech.com/downloads.
We recommend that you use this document in the order it is presented:
Step 1: Install the PicoScope software
Step 2: Read the oscilloscope safety and conformance information
Step 3: Connect the oscilloscope
Kit contents
Your PicoScope 6000E Series oscilloscope is supplied with the items shown below. If any are missing, please
contact your supplier.
Item Quantity Order code for replacements
PicoScope 6000E Series oscilloscope 1 N/A
PicoScope 6000E Series Quick Start Guide
(this document) 1 Free download
PS016 12V, 7A power supply with 1 to 4x IEC
leads (region-dependent) 1 PQ247
USB 3.0 cable, 1.8 m 1 TA155
Carry case 1 PA208
P2056 500MHz 10:1 passive probe with readout
pin (with500MHz oscilloscopes) 4 (2x dual pack) TA437 (single pack) TA480 (dual pack)
P2036 300MHz 10:1 passive probe with readout
pin (with300MHz oscilloscopes) 4 (2x dual pack) TA436 (single pack) TA479 (dual pack)

2DO338-3Copyright © 2020 Pico Technology Ltd. All rights reserved.
Quick Start GuidePicoScope 6000E Series oscilloscopes
Step 1: Install the PicoScope software
1.1 System requirements
To ensure that the software operates correctly, you must use a computer with the system requirements shown in
the table below. The performance of the oscilloscope will improve with a more powerful PC, and will benet from a
multi-core processor.
Specications
Operating system
Microsoft Windows 8 or 10, 32-bit and 64-bit versions
Linux: Ubuntu or openSUSE, 64-bit only[2]
macOS, 64-bit only[2]
Processor
As required by the operating system
Memory
Free disk space
Ports USB 3.0 recommended
USB 2.0 compatible
[2] PicoScope 6 for Linux and PicoScope 6 for macOS are beta software.
1.2 Installing the software
1. Go to picotech.com/downloads, select PicoScope 6000 Series from the list on the left, then select your model
and the latest PicoScope software from the lists that appear. Download and run the installer.
2. In the PicoScope installer, select the language you wish to use.
3. Follow the on-screen instructions to install the software. Do not connect the oscilloscope device until the
installation is complete.
4. You can try out the software with a demo device now, by clicking the new PicoScope icon on your desktop.
For more information on the software, please refer to the A to Z of PC Oscilloscopes at picotech.com/library or the
software User’s Guide, which you can download from picotech.com/downloads or access from the Help menu within
the software
Step 2: Safety and conformance information
To prevent possible electrical shock, re, personal injury, or damage to the product, carefully read this safety
information before attempting to install or use the product. In addition, follow all generally accepted safety practices
and procedures for working with and near electricity.
The product has been designed and tested in accordance with the European standard publication EN61010-1:2010
(Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use) and
EN61010-2-030:2010 (Requirements for Testing and Measuring Circuits). The product left the factory in a safe
condition.
The following safety descriptions are found throughout this guide:
A WARNING identies conditions or practices that could result in injury or death.
A CAUTION identies conditions or practices that could result in damage to the product or equipment to which it is
connected.

3
DO338-3 Copyright © 2020 Pico Technology Ltd. All rights reserved.
Quick Start Guide PicoScope 6000E Series oscilloscopes
2.1 Symbols
These safety and electrical symbols may appear on the product or in this guide.
Symbols Description
Direct current
Alternating current
Earth (ground) terminal
The terminal can be used to make a
measurement ground connection. The
terminal is NOT a safety or protective earth.
Chassis terminal
Equipment protected throughout by double
insulation or reinforced insulation
Possibility of electric shock
Caution Appearance on the product indicates a need to
read this Safety and all operation instruction.
CAT EN61010 overvoltage category
Do not dispose of this product as unsorted
municipal waste
WARNING
To prevent injury or death use the product only as instructed. Protection provided by the product may be impaired if
used in a manner not specied by the manufacturer.
2.2 Maximum input/output ratings
Observe all terminal ratings and warnings marked on the product.
The table below and markings on the product indicate the full scale measurement range and overvoltage protection
range for each oscilloscope model. The full scale measurement ranges are the maximum voltages that can be
accurately measured by the instrument. The overvoltage protection ranges are the maximum voltages that will not
damage the instrument.
WARNING
To prevent electric shock, do not attempt to measure voltages outside of the specied full scale measurement
range.

4DO338-3Copyright © 2020 Pico Technology Ltd. All rights reserved.
Quick Start GuidePicoScope 6000E Series oscilloscopes
All models Full-scale
measurement range
Overvoltage protection (DC + AC peak)
Input channels Aux trigger 10MHz reference
clock input Signal generator
1MΩinput ±20V ±100V
±20V ±5V ±20V
50Ω input ±5V 5.5V RMS
WARNING
Signals exceeding the voltage limits in the table below are dened as “hazardous live” by EN61010.
Signal voltage limits of EN61010-1:2010
±70 V DC 33 V AC RMS ±46.7 V pk max.
PicoScope 6000E Series oscilloscopes must not be used to directly measure hazardous live voltages.
To prevent electric shock, take all necessary safety precautions when working on equipment where hazardous live
voltages may be present.
The following accessories can safely connect to and allow measurement of hazardous live voltages, up to either the
instrument’s full-scale measurement voltage multiplied by the applicable attenuation ratio or the accessory’s marked
maximum operating voltage, whichever is the lower:
• P2036 and P2056 10:1 passive high-impedance oscilloscope probes
• All Pico Technology-supplied high-voltage active probes
Do not exceed the voltage rating marked on any accessory. If an accessory is not marked with a voltage rating on
either the connector, cable or body, or if a protective nger guard is removed, then do not exceed the EN61010
“hazardous live” limits above. When connecting one or more accessories and the instrument together, the lowest
voltage rating in the chain applies to the whole chain.
WARNING
To prevent injury or death, the oscilloscope must not be directly connected to the mains (line power). To measure
mains voltages, use only a differential isolating probe that is specically CAT rated for mains or high energy use,
such as the TA041 listed on the Pico website.
The maximum voltage marked on a CAT-rated accessory must never be exceeded, regardless of whether or not the
accessory is being used for mains or high-energy measurements.
To prevent injury or death, do not use the product or an accessory if it appears to be damaged in any way, and stop
use immediately if you are concerned by any abnormal operations.
A signal voltage exceeding the current full-scale measurement
range is detected and indicated on the measurement display. A
red warning icon will appear in the upper left corner and next to
the relevant channel’s vertical axis.
In these conditions, displayed waveforms and measurements
may be incorrect and the condition may be hazardous. Reduce
input sensitivity to achieve a within-range measurement and
if the condition persists, to prevent injury or death, disable or
otherwise safely disconnect from the source of overvoltage.

5
DO338-3 Copyright © 2020 Pico Technology Ltd. All rights reserved.
Quick Start Guide PicoScope 6000E Series oscilloscopes
CAUTION
Exceeding the voltage rating on any cable, connector or accessory can cause permanent damage to the
oscilloscope and other connected equipment.
2.3 Grounding
WARNING
The oscilloscope’s ground connection through the USB cable is for measurement purposes only. The oscilloscope
does not have a protective safety ground.
Never connect the ground input (chassis) to any electrical power source. To prevent personal injury or death, use a
voltmeter to check that there is no signicant AC or DC voltage between the oscilloscope ground and the point to
which you intend to connect it.
CAUTION
Applying a voltage to the ground input is likely to cause permanent damage to the oscilloscope, the attached
computer, and other equipment.
To prevent measurement errors caused by poor grounding, always use the high-quality USB cable supplied with the
oscilloscope.
2.4 External connections
WARNING
To prevent injury or death, use only the power cord and adaptor supplied with the product. These are approved for
the voltage and plug conguration in your country.
External DC power supply
Voltage (V)
Current (A pk)
Oscilloscope only Oscilloscope + powered
accessories
PicoScope 6824E 12 5 7
PicoScope 6424E 12 4.5 6.5
PicoScope 6804E 12 4.5 6.5
PicoScope 6404E 12 4 6
PicoScope 6403E 12 3.5 5.5
2.5 Environment
WARNING
To prevent injury or death, do not use in wet or damp conditions, or near explosive gas or vapor.
CAUTION
To prevent damage, always use and store your oscilloscope in appropriate environments.

6DO338-3Copyright © 2020 Pico Technology Ltd. All rights reserved.
Quick Start GuidePicoScope 6000E Series oscilloscopes
Storage Operating Quoted accuracy
Temperature –20 to +60°C 0 to 40°C 15 to 30°C after 20
minutes’ warm-up
Humidity
(non-condensing) 5 to 95 %RH 5% to 80% RH
Altitude Up to 2000m
Pollution degree EN61010 pollution degree 2: “only non-conductive pollution occurs except that
occasionally a temporary conductivity caused by condensation is expected”
2.6 Care of the product
The product contains no user-serviceable parts. Repair, servicing and adjustment require specialized test equipment
and must only be performed by Pico Technology or an approved service provider. There may be a charge for these
services unless covered by the Pico ve-year warranty.
Inspect the instrument and all probes, connectors, cables and accessories before use for signs of damage.
WARNING
To prevent electric shock do not tamper with or disassemble the oscilloscope, case parts, connectors or
accessories.
When cleaning the product, use a soft cloth and a solution of mild soap or detergent in water. To prevent electric
shock, do not allow liquids to enter the oscilloscope casing, as this will compromise the electronics or insulation
inside.
CAUTION
Do not block the air vents at the back or front of the instrument as overheating will damage the oscilloscope.
Do not insert any objects through the air vents as internal interference will cause damage to the oscilloscope.
2.7 Conformance
FCC notice
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference which the user will be required to correct at their own expense.
CE notice
This PicoScope6000E Series oscilloscopes have been designed and tested in accordance with the following
European Union directives: 2014/30/EU (EMC), 2014/35/EU (LVD), 2012/19/EU (WEEE) and 2011/65/EC (RoHS), and
left the factory in a safe condition.
For more information, please refer to your product’s EU declaration of conformity, available for free download from
picotech.com/downloads.