Pioneer ADSA1 User manual

Wired Controller Manual
Mode Name: ADSA1
Product appearance depends on goods
Thank you for choosing Pioneer International Air Conditioners, please read this owner’s manual
carefully before operation and retain it for future reference.
If you have lost the User's Manual,please contact the local agent or visit www.pioneerair.com.au
or sent email to [email protected]

Content
User Instructions..................................................................................................1
Installation........................................................................................................1
Installation Place and Installation Requirements...................................................1
Installation of the Signal Wire................................................................................1
Installation of Wired Controller...............................................................................2
Display and Installation instruction..................................................................3
Liquid crystal display.............................................................................................3
Bottoms.................................................................................................................5
Operation Instruction..........................................................................................6
Lock Function........................................................................................................6
The Switch of Centigrade and Fahrenheit.............................................................6
Defrost Function....................................................................................................6
On/Off....................................................................................................................6
Mode Setting..........................................................................................................6
Temperature Setting..............................................................................................7
Fan Speed Setting.................................................................................................7
Swing Setting.........................................................................................................7
Timer Setting..........................................................................................................8
Turbo Function Setting...........................................................................................9
Sleep Function Setting...........................................................................................9
Quiet Function Setting.........................................................................................10
ECO Function Setting..........................................................................................10
Error Code...........................................................................................................12
This marking indicates that this product should not be disposed with other household
wastes throughout the EU. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please use
the
return and collection systems or contact the retailer where the product was
purchased.
They can take this product for environmental safe recycling.

1
Please carefully read this manual before installation and use of this product.
●Do not install or remove the wired controller by yourself. If necessary, please contact the
after- sales serviceman.
● Do not install the wired controller in the humid area or under direct sunlight.
● Do not beat, toss, or frequently assemble/disassemble the wired controller.
● Do not operate the wired controller with wet hands.
● This wired controller is applicable to various kinds of air conditioners, while some specic
functions unavailable to the duct type air conditioners will not be covered in this manual.
User Instructions
1.Installation Place and Installation Requirements
●Do not install the wired controller in the humid area or under direct sunlight
● Do not install the wired controller close to the high-temperature object or place where is
easy to splash on the wired controller.
● Do not install the wired controller directly opposite to the window so as to avoid improper
operation caused by the interference of the neighbor’s same model wired controller.
● Please cut off the power supply of wires embedded in the wall. No operation is allowed
with electricity.
● To avoid abnormal operation caused by electromagnetic interference or other causes,
please take notice of the following statements during wiring.
1. Be sure the communication line is wired into the correct port, otherwise it would lead to
communication fault.
2. The communication line (wired controller) and power line must be separated with the
minimal distance of 20cm, otherwise it would lead to communication fault.
3. If the air conditioner is installed where is easy to suffer electromagnetic interference,
the communication line of the wired controller must be shielded twisted pair.
2. Installation of the Signal Wire
1. Open the indoor unit electric box cover.
2. Make the signal line go through the rubber band
3. Insert the signal wire port in the 4-seat needle which on the indoor unit circuit board.
4. Tightly x the signal wire with wire ties.
Notice:
The communication distance between main board and wired controller can reach 20m.
(The recommended length is 8m)
Installation

2
3. Installation of Wired Controller
The simple installation step of wired controller is as shown on the gure, please notice below
issues:
●Open the bottom plate of the wired controller.
Installation
●Pull out the 4 core twisted pair wire from the mounting hole and pass this line through the
square hole located at the bottom plate of the wired controller.
Use M4×25 screws to fix the bottom plate together with installation hole of the wall.
●Insert the through signal wire in the slot on the wired controller, also lock the wired
controller panel and bottom plate together.

Display and Installation instruction
3
Liquid crystal display:
10 11 12
2345
67 8 913
23
151617181920
1421
22
24
25
26
27
1
282930 31 32 3435
36
33
NO. Icon Nam e Icon Ins truction
1Mode Select the operating
mode:Auto,Cooling,Dehumidification,Fan,Heating
2Fan Setting fan speed
3 ︿ Setting operating temp., range:16-31°C (61°F-88°F)
4﹀Setting timer time, range: 0.5-24 hour
5Function Select Clean, ECO, Sleep, Turbo, Quiet, etc. functions.

4
Display and Installation instruction
NO. Icon Nam e Icon Ins truction
6Horizontal Sw ing Horizontal Sw ing f unction status
7Vertical Sw ing Vertical Sw ing function status (N/A)
8Sleep Sleep function status
9ECO ECO function status
10 Dry Dry f unction status
1 1 Health Health function status (N/A)
1 2 Memory Memory function status
13 Wifi Wif i function status
1 4 Auto Operating in AUTO mode
1 5 Cooling Operating in Cooling mode
16 Dehumidif ication Operating in Dehumidif ication mode
1 7 Fan Operating in Fan mode
1 8 Heating Operating in Heating mode
19 Quiet Quiet f unction status
2 0 Turbo Turbo function status
2 1 Access control Plug-in/out card status
22 Fan speed Current setting fan speed
2 3 Timer Timer status
2 4 Anti-ice Anti-ice function status (N/A)
25 Defrost Defrost f unction status
2 6 Clean Clean function status
2 7 TEMP. Ambient temp. / setting temp.
28 W-pump W-pump status (N/A)
2 9 W-tank W-tank status (N/A)
3 0 W-inlet W-inlet status (N/A)

5
Display and Installation instruction
1
Bottoms:
No. Button Name Button Instruction
1Home Turn on/off unit
NO. Icon Nam e Icon Ins truction
31 W-outlet W-outlet status (N/A)
3 2 E-Heater E-Heater function status
3 3 Solar Sloar status (N/A)
34 Lock Keyboard lock status
3 5 Shield Shield status
3 6 Timer Setting timer on/off

6
Operation Instruction
On/Off
Press the "Home" button to turn on or off the unit.
Mode Setting
In on-state, press the " " button to switch the
operation modes as the sequence shown in below:
Auto HeatingCooling Dehumidification Fan
Lock Function
The Switch of Centigrade and Fahrenheit
In the on/off-state, press " " and " " buttons at the same time for 5s till the wired
controller enters the lock state. In this case, the LED display " ". After that, repress
these two buttons at the same time for 5s to quit the lock state.
Notice:
In the lock state, if malfunction occur, all the buttons will be shield besides Home button.
In On/Off-state, press " " and " " button for 5s to switch between Centigrade
and Fahrenheit.
In Heating mode, when the condition meets the standard that the outdoor unit control
system can turn on the defrost function, the units will defrost automatically, " " icon
appear.
Defrost Function

7
Operation Instruction
Swing Setting
In on-state, press the: " " button, the swing function will
be adjusted as below sequence:
OFF Auto Position1 Position2
Position3Position4Position5
No display
Fan Speed Setting
Notice:
● After installation completed, wired controller will detect the
unit type automatically. Different types may have different
ways of fan speed display, it can be divided into the 2 kinds
above.
● In Dehumidification mode, the fan speed is default to low fan speed and
can not be adjusted.
● When set the AUTO mode, the indoor fan speed will be
changed according to the indoor ambient temp., the fan
speed strip is not displayed.
Press " " button, fan speed of indoor unit will change as the sequence below:
Temperature Setting
Press " " or " " button to increase or decrease setting
temperature in on-state of the unit. If press either of them
continuously, temperature will be changed rapidly.
Temperature setting range is 16°C~31°C (61°F-88°F).
Inverter Air Conditioner :Fixed Speed Air Conditioner :

8
Operation Instruction
Timer Setting
In on-state, press " " button for 3s to set turn off time; in off-state, press " "
button for 3s to set turn on time. Timer range: 0.5-24h
Notice: The min gap of time display is 0.5h, less than 0.5h will display 0.5h.
● Timer Setting:
Press " " button, "SET" icon displayed, then press " " / " " to adjust the time,
after that, press the " " button again to make a confirmation ( "SET" disappeared),
setting complete.
● Cancel Timer Setting:
After Timer is set, press " " button, "SET" icon and timer time disappear, setting canceled.
Press " " button, "SET"
displayed
Press " " / " " to adjust
the time
Press the " " button to
complete the setting
Press " " button cancel
the timer setting

9
Operation Instruction
Turbo Function Setting
Sleep Function Setting
In Cooling/Heating/Fan mode, press " "button for 3s to switch the Turbo function, In this
" and" ". After that, press " " button at the same
case, the LED display "
time for 3s to quiet function. then press " " button to turn off the function.
In Cooling/Heating/Dehumidification mode, press " "button to access the function
selection mode, press" "or“ ” button to switch the Sleep function, " "icon
blinking, then press " " button to turn on/off the function.
Notice:
● When turn on Turbo function, the fan speed strip will not change.
●
Switch to other mode and adjust the fan speed will both exit the Turbo function automatically.
● Can not turn on "Turbo" and "Quiet" function in the same time.
●There has no Turbo function in Dehumidification/Auto mode.
In Cooling/Heating/Fan mode
In Cooling/Heating/
Dehumidification mode
Press " " button switch to
the Sleep function, " " icon
blinking
Press " " button to
turn on/off the function
Press" " button switch to
the Turb o function

10
Operation Instruction
Quiet Function Setting
In Auto/Cooling/Dehumidification/Fan/Heating mode,press" "button for 3s to switch the
Turbo function,After that press " "button at the same time for 3s to Quiet function ,In this
case ,the LED display " "and " ".Then press " "button to turn off the function.
Notice:
● When turn on Quiet function, the fan speed strip will not change.
●
Switch to other mode and adjust the fan speed will both exit the Quiet function automatically.
● Can not turn on "Turbo" and "Quiet" function in the same time.
In Auto/Cooling/Dehumidification/
Fan/Heating mode Press" " button switch
to the
Quiet function
ECO Function Setting
ECO function can make the air conditioner runs in a smaller temperature range by setting
limited value of setting temperature in the Cooling or heating mode to achieve energy saving.
In Cooling/Dehumidification/Heating mode, press " " button to switch to ECO
limited temperature setting function, " " and (" "/" "/" ")icon blinking, press
" " / " " button to set cooling(heating) limited setting temperature, then press " "
button to turn on/off this function.
The initial min. limited cooling setting temperature is 26°C(79°F), the initial heating max.
limited heating setting temperature is 22°C(72°F).

11
Operation Instruction
In Cooling/Dehumidification/
Heating mode
Press " " button to switch to
ECO limited temperature
setting function, " " and ("
"/" "/" ") icon blinking
Press " " / " " button to
set cooling(heating) limited
setting temperature
Press " "button to turn
on/off this function

12
Error Code
When error happens to the unit, the error code will be shown
on the wired controller. When multiple errors simultaneously
happen, the error codes will circularly show up.
When error occurs, please immediately shut down the unit
and contact service center.
● If show other code, please turn off and contact the service
center.
●If show "bL", please turn off and clean the filter(please cut
off power before take out lter).
Finish clean and well install the lter, please turn on , then
the code will disappear.
Error Code Name
bLFilter clean remind
H0High exhaust temp. protection
H1Overcapacity protection
H2Compressor overload protection
H3Anti-frost protection
H4System high pressure protection
H5System low pressure protection
H6Lack refrigerant/ valve stop protection
C8 Auxiliary heat adhesion protection
C9 The communication between indoor unit and wired controller fault
E0Indoor temp. sensor open/short circuit
E2Outdoor temp. sensor open/short circuit
CJ Wired controller temp. sensor fault
FFDefrost or heating oil return
C3Indoor unit report outdoor unit fault
Cb Water full protection