Planet LRP-101C-KIT User manual

Long Reach
PoE over Coaxial / UTP
Extender Kit
LRP-101C-KIT and LRP-101U-KIT
User’s Manual

Trademarks
Copyright © PLANET Technology Corp. 2015.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other
trademarks belong to their respective owners.
Disclaimer
PLANET Technology does not warrant that the hardware will work
properly in all environments and applications, and makes no warranty
and representation, either implied or expressed, with respect to
the quality, performance, merchantability, or tness for a particular
purpose.
PLANET has made every effort to ensure that this User’s Manual is
accurate; PLANET disclaims liability for any inaccuracies or omissions
that may have occurred.
Information in this User’s Manual is subject to change without notice
and does not represent a commitment on the part of PLANET. PLANET
assumes no responsibility for any inaccuracies that may be contained in
this User’s Manual. PLANET makes no commitment to update or keep
current the information in this User’s Manual, and reserves the right
to make improvements to this User’s Manual and/or to the products
described in this User’s Manual, at any time without notice.
If you nd information in this manual that is incorrect, misleading, or
incomplete, we would appreciate your comments and suggestions.

FCC Warning
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the Instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
CE Mark Warning
This is a Class A product. In a domestic environment, this product may
cause radio interference, in which case the user may be required to
take adequate measures.
WEEE Warning
To avoid the potential effects on the environment and human
health as a result of the presence of hazardous substances
in electrical and electronic equipment, end users of electrical
and electronic equipment should understand the meaning of
the crossed-out wheeled bin symbol. Do not dispose of WEEE as
unsorted municipal waste and have to collect such WEEE separately.
Revision
PLANET Long Reach PoE over Coaxial / UTP Extender Kit User’s Manual
MODELS: LRP-101C-KIT / LRP-101U-KIT
REVISION: 1.0 (January 2015)
Part No: EM-LRP-101x-KIT_v1.0 (2350-AN0100-000)

TABLE OF CONTENTS
1. INTRODUCTION ........................................................................ 6
1.1 Package Contents ............................................................... 6
1.2 Introduction of Long Reach Power over Ethernet ................... 8
1.3 Product Features................................................................. 9
1.4 Product Specications ........................................................10
1.4.1 LRP-101C-KIT Specications ......................................10
1.4.2 LRP-101U-KIT Specications ......................................13
2. HARDWARE DESCRIPTION ........................................................16
2.1 LRP-101CH........................................................................16
2.1.1 LRP-101CH Physical Dimensions.................................16
2.1.2 LRP-101CH Front Panel and Rear Panel ......................17
2.1.3 LRP-101CH LED Indicators.........................................17
2.2 LRP-101CE ........................................................................18
2.2.1 LRP-101CE Physical Dimensions .................................18
2.2.2 LRP-101CE Front Panel and Rear Panel.......................19
2.2.3 LRP-101CE LED Indicators.........................................19
2.3 LRP-101UH........................................................................20
2.3.1 LRP-101UH Physical Dimensions ................................20
2.3.2 LRP-101UH Front Panel and Rear Panel ......................21
2.3.3 LRP-101UH LED Indicators ........................................21

2.4 LRP-101UE........................................................................22
2.4.1 LRP-101UE Physical Dimensions.................................22
2.4.2 LRP-101UE Front Panel and Rear Panel.......................23
2.4.3 LRP-101UE LED Indicators.........................................23
3. INSTALLATION .........................................................................24
3.1 Installation Precautions of LRP-101C-KIT..............................24
3.2 Installation Precautions of LRP-101U-KIT .............................24
3.3 Power options: ..................................................................25
3.4 Applications of LRP-101C-KIT with coaxial cable ...................25
3.5 Applications of LRP-101U-KIT with UTP/Twisted-pair Cable ....28
3.6. Optional - DIN-Rail Mounting ..............................................31
4. TROUBLESHOOTING .................................................................33
APPENDIX A: NETWORKING CONNECTION.......................................34
A.1 Switch’s RJ45 Pin Assignments ............................................34
A.2 RJ45 Cable Pin Assignments................................................34

6
1. INTRODUCTION
Thank you for purchasing PLANET Long Reach PoE over Coaxial / UTP
Extender Kit, the LRP-101C-KIT and LRP-101U-KIT. The descriptions of
the four models are as follows:
LRP-101C-KIT
LRP-101CH 1-Port 10/100TX PoE PD + 1-Port Coax Long Reach PoE
Injector
LRP-101CE 1-Port 10/100TX PoE PSE + 1-Port Coax Long Reach
PoE Extender
LRP-101U-KIT
LRP-101UH 1-Port 10/100TX PoE PD + 1-Port UTP Long Reach PoE
Injector
LRP-101UE 1-Port 10/100TX PoE PSE + 1-Port UTP Long Reach PoE
Extender
“Long Reach PoE over Coaxial / UTP Extender Kit” mentioned in
this Manual represents the above four models.
1.1 Package Contents
Open the box of the Long Reach PoE over Coaxial / UTP Extender Kit
and carefully unpack it. The box should contain the following items:
For LRP-101C-KIT
1-Port 10/100TX PoE
PD + 1-Port Coax Long
Reach PoE Injector –
LRP-101CH x 1
1-Port 10/100TX PoE PSE + 1-Port Coax
Long Reach PoE Extender – LRP-101CE x
1

7
User’s Manual x 1 Warning Sticker x 1
For LRP-101U-KIT
1-Port 10/100TX PoE PD + 1-Port
UTP Long Reach PoE Injector –
LRP-101UH x 1
1-Port 10/100TX PoE PSE +
1-Port UTP Long Reach PoE
Extender – LRP-101UE x 1
User’s Manual x 1 Warning Sticker x 2
Warning Sticker x 1

8
Note
If any of these are missing or damaged, please contact
your dealer immediately; if possible, retain the carton
including the original packing material, and use them
again to repack the product in case there is a need to
return it to us for repair.
1.2 Introduction of Long Reach Power over Ethernet
PLANET LRP-101C-KIT and LRP-101U-KIT series PoE over Coaxial
Extender and PoE over UTP Extender are designed to extend IP
Ethernet transmission and inject power over an existing coaxial, UTP
or twisted-pair cable or for distance up to 1000m (3280ft) to PoE IP
camera, PoE wireless AP and any 802.3af/at complied powered device
(PD). It is a perfect solution for sending IP video links and power to
remotely-installed PoE IP cameras that are beyond the 100 meters
distance limit of Ethernet.
Power over Coaxial, UTP or Twisted-pair cable
The Long Reach PoE solution allows Ethernet Data and PoE or PoE+ to
be transmitted using coaxial, UTP or twisted-pair cable. Based on IEEE
802.3at Power over Ethernet Plus and up to 25 watts of power output,
PLANET Long Reach PoE extender solution eliminates the need for
additional remote site power while allowing a single PoE source, such
as a PoE network switch, to provide power to both LRP Extenders and
the camera at long range. This feature eliminates the need for local
and remote site power supplies.
Up to 1000m
Power
Data
PoE IP Cam
Coaxial Cable
PoE
Control Center
LRP-101CH
Injector
LRP-101CE
Extender

9
Stable Operating Performance under Difcult Environments
PLANET Long Reach PoE Extender is the perfect solution for extended
distance data and power transmission for warehouses, parking lots,
campuses, casinos, and many more. They can operate stably under
temperature range from -20 to 70 degrees C which enables the users
to conveniently apply the device in almost any location of the network.
1.3 Product Features
Power over Ethernet
zEliminates Power cabling with PoE over Coaxial
zSupports Power over Ethernet PSE, PoE Injector
zPower and Ethernet data transmission over coaxial up to 1km
zPower and Ethernet data transmission over UTP up to 500m
zComplies with IEEE 802.3af / IEEE 802.3at Power over Ethernet PD
on RJ45 port
zSupports Long Reach PoE power up to 30.8 watts (Vary on power
source and cable distance)
zSupports PoE Power up to 25 watts (Vary on power source and cable
distance)
zAuto detect remote powered device (PD)
zPlug and Play, no PC required
Industrial Case / Installation
zSupports extensive LED indicators for network diagnostics
zMetal case protection
zCompact size, DIN-rail and wall-mount design
zSupports 2000V DC EFT surge protection for power line
zSupports 2000V DC Ethernet ESD protection
z-20 to 70 degrees C operating temperature

10
1.4 Product Specications
1.4.1 LRP-101C-KIT Specications
Model LRP-101CH LRP-101CE
Functions Long Reach PoE Injector Long Reach PoE
Extender
Hardware Specications
Ethernet
Interface
Copper 10/100BASE-TX RJ45
Auto-negotiation/ Auto-MDI/MDI-X
Power over
Ethernet
Standard
IEEE 802.3at/af PoE PD
(Powered Device)
IEEE 802.3at/af PoE
PSE (Power Source
Equipment)
PoE Input
Supports both Mid-Span
and End-Span PSE
Input Range: 48~56V
DC
─
PoE Output ─48~56V DC, 600mA
max.
PoE Budget ─Up to 25 watts
PoE Mode ─End-span, RJ45 Pin
1/2(+), 3/6(-)
Data Rate 100/100Mbps
Cabling Cat5e or above
Maximum
Distance 100 meters
Maximum Frame
sizes 1522bytes
Long
Reach
PoE
Interface
Connectivity
1 x BNC female
connector
Long Reach PoE over
coaxial PSE
(Power Source
Equipment)
1 x BNC female
Long Reach PoE over
coaxial PD
(Powered Device)

11
Long
Reach
PoE
Interface
Power Input ─37~56V DC
Power Output 41~56V DC ─
Power Pin
Assignment
BNC center pole :
DC+
BNC shield : DC -
BNC center pole :
DC+
BNC shield : DC -
Cabling
Coaxial cable: 75 ohm
RG-6/U cable, less than 12Ω/1000 ft
RG-59/U cable, less than 30Ω/1000 ft.
Maximum
Distance
Max. 200m with PoE+ output (656ft.)
Max. 600m with PoE output (1968ft.)
Max. 1200m without PoE output (3,937ft.)
Long Reach
Ethernet
Standard
IEEE 1901
Modulation Type Wavelet-OFDM
Security 128-bit AES encryption
Frequency Band 2 ~ 28 MHz
Encryption AES 128-bit
Performance**
Distance
Data Rate*
(Upload /
Download)
LRP-101CE 802.3af/at
PoE Output Capability**
LRP-101CH
W/56V DC
IN
LRP-101CH
W/30W
PoE+ IN
200m 93 / 93 Mbps 29W 16W
400m 93 / 93 Mbps 22W 14W
600m 87 / 91 Mbps 13W 10W
800m 75 / 83 Mbps 10W 8W
1000m 55 / 73 Mbps 8W 7W

12
Long
Reach
PoE
Interface
LRP Compatibility
LRP-101CE - 1-Port LRP
Extender
With power over coaxial
input
LRP-101CH – 1-Port
LRP Injector
LRP-822CS – 8-Port
LRP over Coax Switch
LRP-1622CS – 16-Port
LRP over Coax Switch
LED Indicators
4 x LEDs
PWR
LRP LNK
PoE IN
LNK/ACT
4 x LEDs
PWR
LRP LNK
PoE-in-use
LNK/ACT
ESD Protection 2KV DC
EFT Protection 2KV ─
Enclosure Metal case
Installation Wall mount or DIN rail with optional kit
Dimensions (W x D x H) 94 x 70 x 26 mm
Weight 200g 375g
Power Requirements
RJ45 PoE Input:
802.3at/af 48~56V
DC
DC Input: 48~56V DC
BNC Power over Coaxial
Input: 44~56V DC
Standards Conformance
Standards Compliance
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3af Power over Ethernet (802.3at Type 1)
IEEE 802.3at Power over Ethernet (802.3at Type 2)
Regulation Compliance FCC Part 15 Class A, CE
Environment
Temperature Operating: -20~70 degrees C
Storage: -40~75 degrees C

13
Humidity Operating: 5~95% (Non-condensing)
Storage: 5~95% (Non-condensing)
* 1. Upload: LRP-101CE to LRP-101CH. Download: LRP-101CH to LRP-
101CE.
2. As there are various resistance values in the category of RG-59/U
or RG-6/U cable, the actual data rate will vary on the quality of
the copper wire and environment factors.
** Depending on what the DC/PoE Power Input and the length of
coaxial cable are.
1.4.2 LRP-101U-KIT Specications
Model LRP-101UH LRP-101UE
Hardware Specications
Ethernet
Interface
Copper 10/100BASE-TX RJ45
Auto-negotiation/ Auto-MDI/MDI-X
Power over
Ethernet
Standard
IEEE 802.3at/af PoE PD
(Powered Device)
IEEE 802.3at/af PoE
PSE (Power Source
Equipment)
PoE Input
Supports both Mid-Span
and End-Span PSE
Input Range: 48~56V
DC
PoE Output ─48~56V DC, 600mA
max.
PoE Budget ─Up to 25 watts
PoE Mode ─End-span, RJ45 Pin
1/2(+), 3/6(-)
Data Rate 100/100Mbps
Cabling Cat5e or above
Maximum
Distance 100m
Maximum Frame
sizes 1522bytes

14
Long
Reach
PoE
Interface
Connectivity
1 x RJ45 connector
Long Reach PoE over
UTP PSE
(Power Source
Equipment)
1 x RJ45 connector
Long Reach PoE over
UTP PD (Powered
Device)
Power Input ─37~56V DC
Power Output 41~56V DC
Power Pin
assignment
RJ45 PIN 1,3,5,7: VCC+ RJ45 PIN 1,3,5,7: VCC+
RJ45 PIN 2,4,6,8: VCC- RJ45 PIN 2,4,6,8: VCC-
Cabling UTP cable:
Maximum
distance
Max. 100m with PoE+ output (328 ft.)
Max. 400m with PoE output (1,312 ft.)
Max. 500m without PoE output (1,640 ft.)
Long Reach
Ethernet
Standard
IEEE 1901
Modulation Type Wavelet-OFDM
Security 128-bit AES encryption
Frequency Band 2 ~ 28 MHz
Encryption AES 128-bit
Performance**
Distance
Data Rate*
(Upload /
Download)
LRP-101UE 802.3af/at
PoE Output Capability**
LRP-101UH
W/56V DC
IN
LRP-101UH
W/30W
PoE+ IN
100m 94 / 94 Mbps 30W 19W
200m 82 / 82 Mbps 30W 18W
300m 63 / 67 Mbps 30W 17W
400m 44 / 48 Mbps 22W 14W
500m 30 / 30 Mbps 18W 12W

15
LED Indicators
4 x LEDs
PWR
LRP LNK
PoE IN
LNK/ACT
4 x LEDs
PWR
LRP LNK
PoE-in-use
LNK/ACT
ESD Protection 2KV DC
EFT Protection 2KV ─
Enclosure Metal case
Installation Wall mount or DIN rail with optional kit
Dimensions (W x D x H) 94 x 70 x 26 mm
Weight 193g 190g
Power Requirements
RJ45 PoE Input:
802.3at/af 48~56V
DC
DC Input: 48~56V DC
Power over RJ45 Input:
44~56V DC
Standards Conformance
Standards Compliance
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3af Power over Ethernet (802.3at Type 1)
IEEE 802.3at Power over Ethernet (802.3at Type 2)
Regulation Compliance FCC Part 15 Class A, CE
Environment
Temperature Operating: -20~70 degrees C
Storage: -40~75 degrees C
Humidity Operating: 5~95% (non-condensing)
Storage: 5~95% (non-condensing)
* 1. Upload: LRP-101UE to LRP-101UH. Download: LRP-101UH to LRP-
101UE.
2. As there are various resistance values in the category 5/5e cable,
the actual data rate will vary on the quality of the copper wire and
environment factors.
** Depending on what the DC/PoE Power Input and the length of UTP
cable are.

16
2. HARDWARE DESCRIPTION
2.1 LRP-101CH
2.1.1 LRP-101CH Physical Dimensions
zLRP-101CH dimensions (W x D x H): 94 x 70.3 x 26.2 mm
48~56V DC IN
LNK/ACTPoE IN
10/100BASE-TX
LRP-101CH
LNK
PWR
LRP OUT Injector
Long Reach PoE Injector - Coax
The LRP interface is
allowed to connect to
LRP Extender only.
CAUTION
Long Reach Power over Ethernet
Rear Panel
Top Panel
Bottom
Front Panel

17
2.1.2 LRP-101CH Front Panel and Rear Panel
Figure 2-1 and Figure 2-2 show the front and rear panels of the
LRP-101CH Long Reach PoE over Coaxial Injector.
48~56V DC IN
LNK/ACTPoE IN
10/100BASE-TX
LRP-101CH
LNK
PWR
LRP OUT Injector
Long Reach PoE Injector - Coax
The LRP interface is
allowed to connect to
LRP Extender only.
CAUTION
Figure 2-1: LRP-101CH Front Panel Figure 2-2: LRP-101CH Rear Panel
2.1.3 LRP-101CH LED Indicators
System
LED Color Function
PWR Green Lit
Power ON: PoE+ / PoE power input from RJ45
PoE PD port
Power ON: 48~56V DC power input from DC
jack
Off Power Off
LRP Coaxial Interface
LED Color Function
LNK Green Lit: indicates that the coaxial link is established.
Off: indicates that the coaxial link is down.
RJ45 10/100BASE-TX Interface
LED Color Function
PoE IN Amber Lit: indicates the RJ45 port is receiving the PoE
Power.
LNK/
ACT Green Blink: indicates the extender is actively sending or receiving data over that port.

18
2.2 LRP-101CE
2.2.1 LRP-101CE Physical Dimensions
zLRP-101CE dimensions (W x D x H): 94 x 70.3 x 26.2 mm
Rear Panel
Top Panel
Bottom
Front Panel
LNK/ACTPoE In-use
10/100BASE-TX
PoE OUT
Long Reach Power over Ethernet
Long Reach PoE Extender - Coax
LRP-101CE
LNK
PWR
LRP IN Extender

19
2.2.2 LRP-101CE Front Panel and Rear Panel
Figure 2-3 and Figure 2-4 show the front and rear panels of the
LRP-101CE Long Reach PoE over Coaxial Extender.
LNK/ACTPoE In-use
10/100BASE-TX
PoE OUT
Long Reach PoE Extender - Coax
LRP-101CE
LNK
PWR
LRP IN Extender
Figure 2-3: LRP-101CE Front Panel Figure 2-4: LRP-101CE Rear Panel
2.2.3 LRP-101CE LED Indicators
System
LED Color Function
PWR Green Lit: indicates the power is on.
LRP Coaxial Interface
LED Color Function
LNK Green Lit: indicates that the coaxial link is established.
Off: indicates that the coaxial link is down.
RJ45 10/100BASE-TX Interface
LED Color Function
PoE-in-Use Amber Lit: indicates the RJ45 Port is providing PoE
power.
LNK/ACT Green Blink: indicates the extender is actively
sending or receiving data over that port.

20
2.3 LRP-101UH
2.3.1 LRP-101UH Physical Dimensions
zLRP-101UH dimensions (W x D x H): 94 x 70.3 x 26.2 mm
Rear Panel
Top Panel
Bottom
Front Panel
Long Reach PoE Injector - UTP
LRP-101UH LRP OUT
LNK
PWR
Injector
Long Reach Power over Ethernet
48~56V DC IN
LNK/ACTPoE IN
10/100BASE-TX
The LRP interface is
allowed to connect to
LRP Extender only.
CAUTION