Planet ICA-HM131 User manual

H.264 Full-HD Fixed Dome IP Camera
ICA-HM131 / ICA-HM131R
User’s manual
Version 1.0.0
- 1 -

Copyright
Copyright (C) 2010 PLANET Technology Corp. All rights reserved.
The products and programs described in this User’s Manual are licensed products of PLANET Technology, This
User’s Manual contains proprietary information protected by copyright, and this User’s Manual and all
accompanying hardware, software, and documentation are copyrighted.
No part of this User’s Manual may be copied, photocopied, reproduced, translated, or reduced to any electronic
medium or machine-readable form by any means by electronic or mechanical. Including photocopying, recording,
or information storage and retrieval systems, for any purpose other than the purchaser's personal use, and without
the prior express written permission of PLANET Technology.
Disclaimer
PLANET Technology does not warrant that the hardware will work properly in all environments and applications,
and makes no warranty and representation, either implied or expressed, with respect to the quality, performance,
merchantability, or fitness for a particular purpose.
PLANET has made every effort to ensure that this User’s Manual is accurate; PLANET disclaims liability for any
inaccuracies or omissions that may have occurred.
Information in this User’s Manual is subject to change without notice and does not represent a commitment on the
part of PLANET. PLANET assumes no responsibility for any inaccuracies that may be contained in this User’s
Manual. PLANET makes no commitment to update or keep current the information in this User’s Manual, and
reserves the right to make improvements to this User’s Manual and/or to the products described in this User’s
Manual, at any time without notice.
If you find information in this manual that is incorrect, misleading, or incomplete, we would appreciate your
comments and suggestions.
CE mark Warning
The is a class B device, In a domestic environment, this product may cause radio interference, in which case the
user may be required to take adequate measures.
WEEE Warning
To avoid the potential effects on the environment and human health as a result of the presence of
hazardous substances in electrical and electronic equipment, end users of electrical and electronic
equipment should understand the meaning of the crossed-out wheeled bin symbol. Do not dispose of
WEEE as unsorted municipal waste and have to collect such WEEE separately.
Trademarks
The PLANET logo is a trademark of PLANET Technology. This documentation may refer to numerous hardware
and software products by their trade names. In most, if not all cases, their respective companies claim these
designations as trademarks or registered trademarks.
- 2 -

- 3 -
Revision
User’s Manual for PLANET H.264 Full-HD Fixed Dome IP Camera
Model: ICA-HM131 / ICA-HM131W
Rev: 1.0.0 (2010, April)
Part No. EM-ICAHM131 Series

- 4 -
TABLE OF CONTENTS
Chapter 1 Introduction ............................................................................................................ 6
Overview....................................................................................................................................................... 6
Package Content .......................................................................................................................................... 7
Physical Details ............................................................................................................................................ 7
Top View .............................................................................................................................................. 7
Side View ............................................................................................................................................. 8
Chapter 2 Preparations for IP Cameam Setup...................................................................... 9
Physical Installation Requirement.............................................................................................................. 9
2.1 System Requirements ............................................................................................................................ 9
2.2 Ethernet Connection.............................................................................................................................. 9
2.3 PoE Connection...................................................................................................................................... 9
Chapter 3 Accessing Camera................................................................................................. 11
3.1 Device Search Software Setup............................................................................................................. 11
3.2 Device Search ....................................................................................................................................... 12
3.3 Example of Changing IP Camera’s Network Property .................................................................... 13
3.4 Installing DC Viewer Software Online ............................................................................................... 14
3.5 Administrator / User Privileges........................................................................................................... 16
3.6 Lens Adjustment .................................................................................................................................. 16
Chapter 4 Configuration & Operation................................................................................. 17
4.1 Browser-based Viewer Introduction................................................................................................... 17
4.2 Home Page ......................................................................................................................................... 18
4.3 System Related Settings.................................................................................................................... 19
4.3.1 Host Name and System Time Setting .............................................................................. 19
4.3.2 Security ........................................................................................................................... 21
4.3.3 Network........................................................................................................................... 22
4.3.4 DDNS.............................................................................................................................. 25
4.3.5 Mail ................................................................................................................................. 26
4.3.6 FTP.................................................................................................................................. 27
4.3.7 Motion Detection............................................................................................................. 28
4.3.8 Snapshot .......................................................................................................................... 32
4.3.9 View Log File.................................................................................................................. 33
4.3.10 View User Information.................................................................................................... 34
4.3.11 View Parameters.............................................................................................................. 36
4.3.12 Factory Default................................................................................................................ 37
4.3.13 Software Version ............................................................................................................. 38
4.3.14 Software Upgrade............................................................................................................ 39
4.4 Video and Audio Streaming Settings .................................................................................................. 42

- 5 -
4.4.1
Video Resolution and Rotate Type .................................................................................. 42
4.4.2 Video Compression ......................................................................................................... 44
4.4.3 Video OCX Protocol ....................................................................................................... 45
4.4.4 Video Frame Skip............................................................................................................ 46
4.4.5 Audio Mode and Bit Rate Settings.................................................................................. 47
4.5 Camera Settings ................................................................................................................................... 48
4.5.1 Exposure Setting ............................................................................................................. 49
4.5.2 White Balance Setting ..................................................................................................... 50
4.5.3 Brightness Setting ........................................................................................................... 51
4.5.4 Sharpness Setting ............................................................................................................ 51
4.5.5 Contrast Setting ............................................................................................................... 51
4.5.6 Saturation ........................................................................................................................ 51
4.5.7 Hue .................................................................................................................................. 51
4.5.8 TV System Setup............................................................................................................. 52
4.6 Logout ................................................................................................................................................ 52
Appendix A: IP Camera Specifications .................................................................................................... 53
Appendix B: Internet Security Settings ................................................................................................... 54
Appendix C: DC Viewer Download Procedure ....................................................................................... 57
Appendix D: Frequently Asked Questions............................................................................................... 59

11
Chapter 1
Introduction
Overview
PLANET has announced a H.264 Full-HD Fixed Dome IP camera, ICA-HM131/131R, for meeting the
feedback from worldwide market. The ICA-HM131/131R support Full HD recording for high quality image.
Integrated the next generation video compression technology – H.264, the ICA-HM131/131R can compress
the video size to smaller one for users to transfer the Mega-Pixel image on Internet easily.
The ICA-HM131/131R IP Cameras are innovatively designed for quick and easy installation in drop ceilings
without concerning the outlet / socket locations. Power over Ethernet (IEEE 802.3af) supplies power to the
cameras via the network, eliminating the need for power cables and reducing installation costs.
Multi-profile stands for video stream simultaneously. The ICA-HM131/131R can deliver clear image with dual
H.264/M-JPEG stream video up to 1080p (1920 x 1080 pixels). The IP Cameras use progressive scan,
providing full resolution images of moving objects without distortion, in 30 frames per second, perfect for
critical areas such as entrances or checkouts that need to be monitored in greater detail.
The ICA-HM131/131R can be managed by PLANET Cam Viewer Plus, the professional management software
for multi-camera video surveillance application, to provide monitoring, recording and event management
functions. The Cam Viewer Plus enables you to setup a comprehensive and effective surveillance system
quickly and easily. With the ICA-HM131/131R managed by the Cam Viewer Plus, it provides an enhanced
professional security environment to protect your property and life.
Product Features
•1/2.7” progressive CMOS
•Dual video stream H.264 and M-JPEG video compression simultaneously
•Supports 1080p Full-HD resolution (1920 x 1080 pixels)
•30 fps at 1080p Video Resolution (ICA-HM131R)
•Compliant with IEEE 802.3af PoE interface
•3GPP for 3G mobile remote applications
•Built-in Microphone for one-way audio
•Supports Micro SD card storage
•Easy configuration and management via Windows-based utility or web interface
•DDNS, PPPoE and FTP uploading supports more alternatives in surveillance network
- 6 -

•Motion Detection feature can monitor any suspicious movement in specific area
•Cam Viewer Plus - Central management software supported
Package Content
The contents of your product should contain the following items:
IP Camera
Quick installation guide
User’s manual CD
Accessories Kit
Physical Details
Top View
4. Tilt Fixed
Screw
1. Lens
2. Reset Button
3. Focus Fixed
Screw
5. Microphone
- 7 -
Top View of ICA-HM131/131R

Item Description
1 Lens Rotate the lens right/left to adjust focus
2 Reset Button Restore to default setting, press the button with a proper tool
3 Focus Fixed Screw Loosen the screw to adjust the lens
4 Tilt Fixed Screw Loosen the screw to adjust tilt angle
5 Microphone The IP Camera has built-in an internal microphone. This microphone is
hidden in the internal case.
Side View
2. RJ-45 LAN
Socket
1. Micro-SD
Card slot
Side View of ICA-HM131/131R
Item Description
1 Micro-SD Card slot User can insert a micro SD card into this slot for event recording.
2 RJ-45 LAN Socket
The LAN socket is a RJ-45 connector for connections to
10/100Base-TX Fast Ethernet cabling. The LAN socket is compliant
with IEEE802.3af standard PoE interface, and IP Camera is necessary
supplied power through PoE Switch/Hub device.
- 8 -

2
Chapter 2
Preparations for IP Cameam Setup
Physical Installation Requirement
The notices and introduction on system installation will be described particularly in this chapter. Please follow
the description to operate the unit.
In order to prevent the unit from data loss and system damage that caused by a sudden power fluctuation, use
of an Uninterruptible Power Supply (UPS) is highly recommended.
2.1 System Requirements
To perform the IP Camera via web browser, please ensure your PC is in good network connection, and meet
system requirements as described below for appropriate setup and well view quality.
Items System Requirement
Personal Computer 1. Intel○
R
Pentium○
R
M, 2.16 GHz or Intel○
R
Core
TM
2 Duo, 2.0 GHz
2. 2 GB RAM or more
Operating System Windows VISTA or Windows XP
Web Browser Microsoft Internet Explorer 6.0 or later
Network Card 10Base-T (10 Mbps) or 100Base-TX (100 Mbps) operation
Viewer ActiveX control plug-in for Microsoft IE
2.2 Ethernet Connection
Please follow the instructions below to connect this IP Camera’s Ethernet cable.
2.3 PoE Connection
Connect the one end of the Ethernet cable to the network port on the camera, and the other end to Power
Sourcing Equipment (PSE) like 802.3af POE Hub/ Injector or 802.3af POE Switche.
Check the status of the link indicator and activity indicator LEDs; if the LEDs are unlit, please check the
connections.
Green Link Light indicates good network connection.
Orange Activity Light flashes for network activity indication.
- 9 -

Note
1. The RJ-45 interface only accept IEEE802.3af PSE (Power Source
Equipmetns) Any non-standard or passive POE is not allowed to
power the system and will damage the IP Camera permanently.
2. You can also consult your local dealer for 802.3af POE PSE devices
such as single port injector for single point installation. Or, for mass
installation, a Injector Hub for the network that already existed with
Ethernet Switches or POE Switch all can be deployed
- 10 -

3
Chapter 3
Accessing Camera
For initial access to the IP Camera, users can search the camera through the installer program:
DeviceSearch.exe, which can be found in “DeviceSearch” folder in the supplied CD.
3.1 Device Search Software Setup
Step 1: Double click on the program Planet Device Search.exe (see the icon below); its window will
appear as shown below. Then click the “Device Search” button.
Step 2: The security alert window will pop up. Click “Run” to continue.
- 11 -

3.2 Device Search
Step 3: Click “Device Search” again, and all the finding IP devices will be listed in the page, as shown
in the figure below. The IP Camera’s default IP address is: 192.168.0.20.
Step 4: Double click or right click and select “Browse” to access the camera directly via web browser.
Step 5: Then the prompt window of request for entering default username and password (as shown
below) will appear for logging in to the IP Camera.
The default login ID and password for the Administrator are:
- 12 -

Login ID Password
admin null (without password)
NOTE: ID and password are case sensitive.
NOTE: It is strongly advised that administrator’s password be altered for the security
concerns. Refer to section 4.3.2 Security for further details.
Additionally, users can change the IP Camera’s network property, either DHCP or Static IP, directly in
the device finding list. Refer to the following section for changing the IP Camera’s network property.
3.3 Example of Changing IP Camera’s Network Property
Users can directly change an IP Camera’s network property, ex. from static IP to DHCP, in the finding
device list. The way to change the IP Camera’s network property is specified below:
Step 1: In the finding device list, click on the IP Camera that you would like to change its network
property. On the selected item, right click and select “Network Setup.” Meanwhile, record the IP
Camera’s MAC address, for future identification.
Step 2: The “Network Setup” page will come out. Select “DHCP,” and press “Apply” button down the
page.
- 13 -

Step 3: Click “OK” on the Note of setting change. Wait for one minute to re-search the IP Camera.
Step 4: Click the “Device Search” button to search all the devices. Then select the IP Camera with the
correct MAC address. Double click on the IP Camera, and the login window will come out.
Step 5: Enter User name and Password to access the IP Camera.
3.4 Installing DC Viewer Software Online
For the initial access to the IP Camera, a client program, DC Viewer, will be automatically installed to
your PC when connecting to the IP Camera.
- 14 -

If the Web browser doesn’t allow DC Viewer installation, please check the Internet security settings or
ActiveX controls and plug-ins settings (see Appendix B: Internet Security Settings) to continue the
process.
The Information Bar (just below the URL bar) may come out and ask for permission to install the
ActiveX Control for displaying video in browser (see the figure below). Right click on the Information Bar
and select “Install ActiveX Control…” to allow the installation.
Then the security warning window will pop up. Click “Install” to carry on software installation.
Click “Finish” to close the DC Viewer window when download is finished. For the detailed software
download procedure, please refer to Appendix C: DC Viewer Download Procedure.
Once login to the IP Camera, users will see the Home page as shown below:
- 15 -

3.5 Administrator / User Privileges
“Administrator” represents the person who can configure the IP Camera and authorize users access to
the camera; “User” refers to whoever has access to the camera with limited authority, i.e. entering
Home and Camera setting pages.
3.6 Lens Adjustment
The image displays on the Home page when successfully accessing to the IP Camera. Adjust the
camera’s focus to produce a clear image. Please refer to the procedure below.
Step 1: Unscrew the IP Camera’s cover.
Step 2: Loosen the focus fixed screw, and rotate the lens counter-/clockwise to adjust focus; loosen the
tilt fixed screw, and adjust the camera’s tilt angle.
Tilt Fixed Screw Focus Fixed Screw
- 16 -

4
Chapter 4
Configuration & Operation
The IP Camera is provided with a user-friendly browser-based configuration interface, and a free
bundled CMS (Central Management System) for record and playback video. In this chapter, information
about main page introduction, system related settings and camera settings will be described in detail.
For further information about CMS software, please refer to Chapter 5. CMS Software Introduction and
CMS user manual.
4.1 Browser-based Viewer Introduction
The figure below shows the Home page of the IP Camera’s Viewer Window.
- 17 -
There are five tabs: Home, System, Streaming, Camera and Logout on the top of the viewer window.
Home
Users can monitor live video of the targeted area.
System setting
The administrator can set host name, system time, root password, network related settings, etc. Further
Viewer Window Setting Tabs
Time Display
Time Display
Video Compression info
Video Format
Selection Snapshot Button
Display Mode

details will be interpreted in section 4.3 System Related Settings.
Streaming setting
The administrator can modify video resolution and rotate type and select audio compression mode in
this page.
Camera setting
Users can adjust various camera parameters, including <Exposure>, <White Balance>, <Brightness>,
<Sharpness>, <Contrast> and <Digital Zoom>.
Logout
Click on the tab to re-login the IP Camera with another username and password.
4.2 Home Page
In the Home page, there are several function buttons right down the displayed image.
Screen Size Adjustment
Image display size can be adjusted to x1/2 and full screen.
Digital Zoom Control
In the full screen mode, users can implement digital zoom by right clicking the mouse, rotating the
mouse wheel (for zoom in/out) and dragging the mouse into any direction.
- 18 -

Snapshot
Press the button, and the JPEG snapshots will automatically be saved in the appointed place.
The default place of saving snapshots is: C:\.
4.3 System Related Settings
The figure below shows all categories under the “System” tab. Each category in the left column will be
explained in the following sections.
NOTE: The “System” configuration page is only accessible by the Administrator.
4.3.1 Host Name and System Time Setting
Press the first category: <System> in the left column; the page is shown as below.
- 19 -

Host Name
The name is for camera identification. If Motion Detection function is enabled and is set to send alarm
message by Mail/FTP, the host name entered here will display in the alarm message.
Time Zone
Select the time zone you are in from the drop-down menu.
Sync With Computer Time
Select the item, and video date and time display will synchronize with the PC’s.
Manual
The Administrator can set video date, time and day manually. Entry format should be identical with that
shown next to the enter fields.
Sync with NTP server
Network Time Protocol (NTP) is an alternate way to synchronize your camera’s clock with a NTP server.
Please specify the server you wish to synchronize in the enter field. Then select an update interval from
the drop-down menu. For further information about NTP, please see the web site: www.ntp.org.
- 20 -