Planet IPM-8221 User manual

IP-based 8-port Switched Power Manager
with 2 Cascaded Ports
IPM-8221
Quick Installation Guide

Table of Contents
1. Package Contents................................................................................. 3
2. PhysicalSpecications .......................................................................... 4
3. Product Appearance Description............................................................. 5
3.1 Front & Rear Panels ....................................................................... 5
4. Hardware Setup ................................................................................... 7
4.1 Installation.................................................................................... 7
4.2 Rack Mounting............................................................................... 8
5. Web Login ........................................................................................... 9
5.1 Starting Web Management.............................................................. 9
6. PDU Discovery through PLANET NMS Controller (NMS-500/NMS-1000V) ....12
7. Customer Support .............................................................................. 13

3
1. Package Contents
Thank you for purchasing PLANET IP-based Switched Power Manager,
IPM-8221. “PDU” mentioned in this quick installation guide refers to the
IPM-8221.
Open the box of the Switched IPM and carefully unpack it. The box should
contain the following items:
PDU x 1 Quick Installation Guide QR
Code Sheet x 1 Power Cord x 1
Let’s get started with your PLANET product
IPM-8221
EN Please scan the QR code to browse our online User’s Manual or Quick
Installation Guide and follow the instructions to complete the setup.
Quick
Installation
DE
Bitte scannen Sie den QR Code sie werden per Browser zur
Bedienungsanleitung oder Schnellanleitung weiter geleitet. Folgen Sie den
Anweisungen um die Installation abzuschließen.
FR
Veuillez scanner le code QR pour obtenir notre Notice d’Utilisation en
ligne ou notre Guide d’Installation Rapide et suivez les instructions pour
compléter la conguration
ES
Escanee el código QR para encontrar el Manual del Usuario en línea o
la Guía de Instalación Rápida y siga las instrucciones para completar la
conguración.
IT Scansiona il codice QR per consultare online il Manuale utente o la Guida di
installazione rapida e segui le istruzioni per completare la congurazione.
PT Por favor, escaneie o QR code para navegar no Manual do Usuário ou Guia
de Instalação Rápida. Siga as instruções para completar a conguração.
PL
Zeskanuj kod QR, aby otworzyć naszą internetową instrukcję obsługi
lub instrukcję szybkiej instalacji. Postępuj zgodnie z instrukcjami, aby
zakończyć poprawną kongurację.
RU
One word modify: Отсканируйте QR-код, чтобы просмотреть наше
онлайн-руководство пользователя или руководство по быстрой
настройке, и следуйте инструкциям для завершения настройки
RO Te rugam sa scanezi codul QR, pentru a descarca User’s Manual sau Quick
Installation Guide si a urmari instructiunile necesare in nalizarea instalarii
AR
Need more help?
PLANET online FAQs:
http://www.planet.com.tw/en/support/faq
Technical Support: [email protected]
Copyright © PLANET Technology Corp. 2023.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.
Part No. 2341-F10190-000
Environmental Sensor x 1 Rack-mounting Kit x 1
If any item is found missing or damaged, please contact your local reseller for
replacement.

4
2.PhysicalSpecications
Model Device Dimensions
IPM-8221 442 x 159 x 44.5 mm

5
3. Product Appearance Description
3.1 Front & Rear Panels
5 3
2
1
4
6 7 8 9 10 11
No. Item Description
1Default Switch
This switch is recessed and must be pushed with a
thin object, such as the end of a paper clip.
 You can press this button and hold it for more
than 3 seconds to reset the PDU to factory
default values.
 Release this switch and restart the device to take
eect.
2Reset Switch Hold down the key to restart the PDU.
3LCD Displays LCD is used to display PDU status information.
4Interface Selection
Button Used to control the menu function of LCD.
5Power Output
Socket
Each power socket can connect to electrical devices
with the current less than 10A.
The total output power is less than 16A. If the
power output exceeds the maximum load, the
PDU and electrical devices may be damaged and
the circuit breaker protection function may be
triggered.

6
6Cascade Input
Port Cascaded RJ45 input to other PDUs.
7Cascade Output
Port Cascaded output with other PDUs through RJ45.
8LAN Port It can connect to 10M/100M Ethernet network.
Control and access PDUs.
9T/H Sensor Ports External temperature and humidity sensors can be
connected through RJ11 ports.
10
Overload
Protection
Switch
When the PDU is overloaded, the protector
automatically disconnects the power supply to
protect the electrical equipment.
11 16A Power Input
Socket
Please plug the power cable into the AC power
supply here. This power input socket is equipped
with a switch setting. When the power cable is
connected and the power switch is turned on, the
PDU can be put into working state.

7
4. Hardware Setup
A PDU can be installed in an indoor distribution box or on a wall. To install a
PDU in the above positions, use the fasteners and screws delivered with the
DEVICEtosecurethePDUtoaspecicposition.
4.1 Installation
To install a PDU, perform the following operations:
Step 1. Properly ground the PDU using ground cables. Connect one end of
the grounding cable to the grounding terminal and the other end to
the appropriate grounding object.
Step 2. For each group of devices to be connected, use their power cables
to connect the AC socket of the device to the available socket on the
PDU.
Step 3. Connect the cable that connects the PDU to the network connection
port of the PDU.
Step 4. Connect the PDU power cable to the AC power supply.
After connecting PDUs, power on PDUs and connected devices.
1. Do not omit Step 1. Proper grounding can avoid damage
caused by surge or static electricity.
2. Do not plug the PDU power cord into the extender of multiple
sockets to prevent it from being unable to get enough power
to operate properly.
3. It is strongly recommended that you use harness straps and
cable boxes to secure cables to the front panel of the equip-
ment. Prevent loose and poor contact in subsequent time.

8
4.2 Rack Mounting
Please note the following items when performing rack installation.
1. When extending the device out of the rack, ensure that the rack is smooth
and stable.
2. Do not overload the AC branches that supply power to the frame; the
carrying capacity of the whole frame should not exceed eighty percent of
the power of the branch.
3. Make sure that all equipment used on the rack – including power strips and
other electrical connectors – is properly grounded.
4.Ensurethatproperairowisprovidedtodevicesintherack.
5. Ensure that the operating ambient temperature of the rack environment
doesnot exceedthemaximumambient temperaturespeciedforthe equip-
ment by the manufacturer
6. Do not step on or stand on any device when servicing other devices in a
rack.

9
5. Web Login
5.1 Starting Web Management
Step 1: Log in the web setting page of PDU
Enter the IP address of PDU (e.g., https://192.168.0.10) in the address bar
using the https method of your PC’s web browser.
The default user name and password are both admin
For security reasons, you must change to your unique user name and
password (See Step 4. Changing Administrator Log-in for more information).
Step 2: After you have logged in to the PDU successfully, the Socket Access/
Connection page will appear:

10
After logging in, the top panel of the page provides the following options for
PDU operations: Home Page, Control, Statistics, Settings, and About. Click
the corresponding TAB to select, set, and view the functions provided on the
corresponding page.
Step 3: Network Conguration
Tocongurethenetwork,performthefollowingoperations:
1. Click the Setting TAB.
2.The device conguration page is displayed. A screen similar to the following
should appear:
3.Please ll in the eld data according to the information provided in the
device setting instructions of Network Setting.
Step 4: Change of administrator Log-in
To change the default user name and password of the administrator, perform
the following operations:
1. Click the User List in the User Management button at the top of the screen.
A list of users is listed on the left side of the user administrator page, with
their more detailed information displayed on a large block in the center.