Planet XGSW-28040 User manual

24-Port 10/100/1000Mbps with 4 Shared SFP
+ 4-Port 10G SFP+ Managed Switch
XGSW-28040
Quick Installation Guide

Table of Contents
1. Package Content......................................................................................... 3
2. Requirements ............................................................................................. 4
3. Terminal Setup ........................................................................................... 5
4. Logon to the Console .................................................................................. 6
5. CongureIPAddress .................................................................................. 7
6. Start Web Management............................................................................... 9
Customer Support...........................................................................................12

3
1. Package Content
Thank you for purchasing PLANET 24-Port 10/100/1000Mbps with 4 Shared SFP
+ 4-Port 10G SFP+ Managed Switch, XGSW-28040. Terms of “Managed Switch”
means the Switches mentioned titled in the cover page of this Quick installation
guide.
Open the box of the Managed Switch and carefully unpack it. The box should
containthefollowingitems:
TheXGSWManagedSwitchx1l
User’s Manual CD x 1l
QuickInstallationGuidex1l
RS232 Cable x 1l
RubberFeetx4l
TwoRack-mountingBracketswithAttachmentScrewsx1l
PowerCordx1l
SFPDustCapsx8l
If any item is found missing or damaged, please contact your local reseller for
replacement.

4
2. Requirements
Workstations of subscribers running Windows XP/2003/Vista/7/2008, MAC OS9l
orlater,Linux,UNIXorotherplatformcompatiblewithTCP/IPprotocols.
WorkstationinstalledwithEthernetNIC(NetworkInterfaceCard)l
Serial Port connectl(Terminal)
AbovePCwithCOMPort(DB9)
Ethernet Port connectl
 Networkcables-Usestandardnetwork(UTP)cableswithRJ-45connectors.
 AbovePCinstalledwithWEBBrowserandJAVAruntimeenvironmentPlug-in
Note
It is recommended to use Internet Explore 7.0 or above to access
XGSWManagedSwitch.

5
3. Terminal Setup
To congure the system, connect a serial cable to a COM port on a PC or
notebookcomputerand to serial(console)portof theXGSWManagedSwitch. The
console port of the Managed Switch is DCE already, so that you can connect the
consoleportdirectlythroughPCwithouttheneedofNullModem.
PC / Workstation
with
Terminal emulation software
Serial Port
RS-232
Serial Port
115200,8,n,1
XGSW Managed Switch
A terminal program is required to make the software connection to the XGSW
Managed Switch. Windows’ Hyper Terminal program may be a good choice. The
HyperTerminalcanbeaccessedfromtheStart menu.
1. Click START,thenPrograms,AccessoriesandthenHyper Terminal.
2.When the following screen appears, make sure that the COM port should be
conguredas:
Baud:115200
Databits:8
Parity:None
Stopbits:1
FlowControl:None

6
4. Logon to the Console
Once the terminal has connected to the device, power on the XGSW Managed
Switch,theterminalwilldisplaythatitisrunningtestingprocedures.
Then, the following message asks the login username and password. The factory
default username and password as following and the login screen in Figure 4-1
appears.
Username:admin
Password:admin
Figure 4-1 XGSW Managed Switch Console Login screen
Note
1.For security reason, please change and memorize the
newpasswordafterthisfirstsetup.
2.Only accept command in lowercase letter under console
interface.

7
5.CongureIPAddress
TheXGSWManagedSwitchisshippedwithdefaultIPaddressasfollowing.
IPAddress:192.168.0.100
SubnetMask:255.255.255.0
Tocheckthe currentIPaddress or modifyanew IP addressfortheSwitch, please
usetheproceduresasfollow:
Show the current IP address
1. On “Switch/>”prompt,enter“show ip”.
2.Thescreendisplaysthe currentIPaddress,SubnetMask andGateway.Asshow
inFigure5-1.
Figure 5-1 Show IP Information screen

8
 Congure IP address
3. On “Switch/>” prompt, enter the following command and press <Enter>. As
showinFigure5-2.
Switch/> ip setup 192.168.1.100 255.255.255.0 192.168.1.1
ThepreviouscommandwouldapplythefollowsettingsfortheSwitch.
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
Figure 5-2 Set IP Address screen
4.RepeatStep1tocheckiftheIPaddressischanged.
If the IP is successfully congured, the Managed Switch will apply the new IP
address setting immediately. You can access the Web interface of XGSW Managed
SwitchthroughthenewIPaddress.
Note
If you do not familiar with console command or the related param-
eter,enter“help”anytimeinconsoletogetthehelpdescription.

9
6. Start Web Management
ThefollowingshowshowtostartuptheWeb ManagementoftheXGSWManaged
Switch. Note the Managed Switch is congured through an Ethernet connection,
please make sure the manager PC must be set on the same IP subnet address.
For example, the default IP address of the XGSW Managed Switch is
192.168.0.100, then the manager PC should be set at 192.168.0.x (where x
is a number between 1 and 254, except 100), and the default subnet mask is
255.255.255.0.
PC / Workstation
with
IE Browser
RJ-45/UTP-Cable
IP Address:
192.168.0.x
IP Address:
192.168.0.100
XGSW Managed Switch
Figure 6-1 IP Management Diagram
Login the Managed Switch
1.Use Internet Explorer 7.0 or above Web browser, enter IP address
http://192.168.0.100 (the factory-default IP address or that you have just
changedinconsole)toaccesstheWebinterface.

10
2.When the following dialog box appears, please enter the default username and
password “admin” (or the password you have changed via console). The login
screeninFigure6-2appears.
DefaultUsername:admin
DefaultPassword:admin
Figure 6-2 Login screen
3.Afterenteringthepassword,themainscreenappearsasFigure6-3.
Figure 6-3 Web Main Screen of XGSW Managed Switch