Planet EPL-2000 User manual

2 x PON Interface, 2 x GbE SFP + 2 x GbE RJ45,
1 x MGT Port
EPL-2000
Quick Installation Guide

Table of Contents
1. Package Contents ....................................................................................... 3
2. Requirements ............................................................................................. 4
3. MySQL Server Installation ........................................................................... 5
4. EMS Installation ......................................................................................... 9
5. Starting PLANET-EMS Management..............................................................11
6. Customer Support .....................................................................................13

3
1. Package Contents
Thank you for purchasing PLANET GEPON OLT EPL-2000. The term “GEPON OLT”
refers to the Switch mentioned in this Quick Installation Guide.
The box should contain the following items:
zGEPON OLT x 1
zMGB-PX20 SFP Transceiver x 2
zQuick Installation Guide x 1
zUser’s Manual CD x 1
zPower Cord x 1
zTwo Rack-mounting Brackets with Attachment Screws x 1 (set)
If any item is found missing or damaged, please contact your local reseller for
replacement.

4
2. Requirements
PLANET GEPON OLT provides a GUI utility to manage the system; the following
equipment is necessary for further management:
Subscriber PC is installed with Ethernet NIC (Network Card)
MySQL Software (Windows Platform) http://dev.mysql.com/
EMS Software (Windows Platform)
Management Port connection
zNetwork cables - Use standard network (UTP) cables with RJ45 connectors
PON Port connection
zFiber Transceiver - Slot with a 1000BASE-PX20 SFP PON transceiver
zFiber Cable - Use single mode of ber (SC) cable

5
3. MySQL Server Installation
Install the MySQL software with the purpose of saving equipment’s alarm message,
administrator message, system log, etc.
1. Please visit MySQL ofcial website http://dev.mysql.com/ and download MySQL-
Installer-Community-5.5.50.0.msi.
2. Once the Setup program starts running, please click the “Next” button for
starting installation.
Figure 3-1 MySQL License Agreement Screen

6
3. Select Server only and click “Next” button.
Figure 3-2 Selection of a Setup type
4. The Installation window appears. Please click the “Execute” button.
Figure 3-3 Selection of an Installation Type

7
5. Please select a Server type. Keep the default setting of “Development Machine”
and click the “Next” button.
Figure 3-4 Selection of a Server Type
6. Please set the security options. Type the password “1234” for the current root.
Click the “Next” button.
Figure 3-5 Setting of Security Options

8
7. Please keep the default setting and click the “Next” button.
Figure 3-6 Selection of Windows Service
8. Please click the “Execute” button for starting the conguration. And then click
the “Finish” button when the conguration is done.
Figure 3-7 Start of Conguration

9
4. EMS Installation
1. Insert the bundled CD disk into the CD-ROM drive to launch the autorun
program. Once completed, a welcome screen will appear. Click the “Utility”
button and the InstallShield Wizard dialog box will appear as shown below.
2. Once the Setup program starts running, please click the “Next” button for
starting installation.
Figure 4-1 EMS Setup Wizard Screen
3. During the installation, it will ask for the place to put the EMS folder.
Figure 4-2 EMS Folder Installation Screen

10
4. Click “Install” for starting installation.
Figure 4-3 EMS Installation Screen
5. Click the “Finish” button for completing the EMS Setup.
Figure 4-4 EMS Installation Completed Screen
6. When the EMS installation is done, the icon will appear on the desktop.

11
5. Starting PLANET-EMS Management
Figure 5-1 IP Management Diagram
The following shows how to start up the EMS Management of the GEPON OLT.
Please note the GEPON OLT is congured through an Ethernet connection, making
sure the manager PC must be set to the same IP subnet address.
For example, the default IP address of the GEPON OLT is 192.168.1.10 (the
factory default IP address), then the manager PC should be set to 192.168.1.x
(where x is a number between 1 and 254, except 10), and the default subnet
mask is 255.255.255.0.
Logging to the GEPON OLT
1. Double-click the PLANET-EMS icon on the PC desktop and a window will pop
up asking you to enter the user name and password. Please enter the default
user name “admin” and password “admin” as the login screen in Figure 5-2
appears.
Figure 5-2 PLANET-EMS Icon and Login Window

12
2. After entering the user name and password, the PLANET-EMS utility main screen
will appear as in Figure 5-3.
Figure 5-3 Main Screen of EPL-2000 GEPON OLT

13
6. Customer Support
Thank you for purchasing PLANET products. The above steps show the simple
installation and conguration of the EPL-2000. For further congurations of EMS
Utility, please refer to the user manual in the CD-ROM. If you have further
questions, you can browse our online FAQ resource on the PLANET Website rst
to check if it could solve your issue. If you need more support information, please
contact PLANET switch support team.
PLANET online FAQ :
http://www.planet.com.tw/en/support/faq.php?type=1
Switch support team mail address :
[email protected]

14
Copyright © PLANET Technology Corp. 2016.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their
respective owners.