Planmeca PlanScan User manual

Planmeca PlanScan
User Manual

Table of Contents
Introduction...............................................................................................6
Associated Documentation.............................................................................................................................6
Indications for Use..............................................................................................................................................6
Contraindications................................................................................................................................................6
Turn ON Laptop ......................................................................................................................... 7
Opening Romexis....................................................................................................................... 7
Scanner ...................................................................................................................................... 7
Removable Components..................................................................................................................................7
Connecting the Thunderbolt™ Adapter.............................................................................................7
Disconnecting the Thunderbolt™ Adapter .......................................................................................7
Scanner Indication Lights ................................................................................................................................8
Cradle ......................................................................................................................................................................8
Moving/Viewing the 3D Model ................................................................................................. 8
Using the Mouse..................................................................................................................................................8
Rotating the Model....................................................................................................................................8
Changing the Model Size ........................................................................................................................8
Moving the Model......................................................................................................................................9
System Options and Default Settings ...................................................................................... 9
Screenshots...........................................................................................................................................................9
The Settings Screens..........................................................................................................................................9
Version............................................................................................................................................................9
Reset Warnings............................................................................................................................................9
Sprue Angle Method ............................................................................................................................. 10
Margin Ramp ............................................................................................................................................ 10
Spacer Thickness ..................................................................................................................................... 10
Dropper Tool ............................................................................................................................................. 10
Spaceball Settings................................................................................................................................... 10
Network Settings..................................................................................................................................... 10
Workbook Exercises................................................................................................................................ 10
Mill Notication Settings ...................................................................................................................... 10
Milling Settings ........................................................................................................................................ 10
Auto or Occlusal POI............................................................................................................................... 10
Administration.........................................................................................11
Relocating the Laptop and/or Scanner .................................................................................. 11
System Information and Upgrades ........................................................................................ 11
Software and Hardware................................................................................................................................. 11
Connecting the Scanning Tip.................................................................................................. 11
Disconnecting the Scanning Tip ............................................................................................. 11
Cleaning the Scanner Tip......................................................................................................... 12
Tip Identication...................................................................................................................................... 12
Instructions for Autoclaveable Tips ........................................................................................................... 13
Instructions for High Level Disinfection Tips.......................................................................................... 14
Storage........................................................................................................................................................ 14
Cleaning the System ................................................................................................................ 14
© 2015 E4D Technologies All rights reserved
10828200.B 3
Planmeca

For intraoral scanning systems only....................................................................................... 14
Additional Assistance .............................................................................................................. 15
Scanning Safety.......................................................................................16
Patients ....................................................................................................17
Managing Patients in Planmeca Romexis.............................................................................. 17
Creating new patients .................................................................................................................................... 17
Searching Patients ........................................................................................................................................... 17
Sorting patients................................................................................................................................................ 17
Selecting and opening patients ................................................................................................................. 18
Managing Cases ....................................................................................................................... 18
Deleting Files............................................................................................................................ 19
Starting a New Restoration..................................................................................................... 19
Setup tab .................................................................................................................................. 19
Scanning ..................................................................................................20
Scan Tab Layout ....................................................................................................................... 20
Scanner Tips ............................................................................................................................. 21
Scanning Tip Sizes............................................................................................................................................ 21
Scanner Indicators .......................................................................................................................................... 22
Portrait/Landscape Indicators ............................................................................................................ 22
Session Usage........................................................................................................................................... 22
Autoclave Indicator................................................................................................................................. 22
Color Indicator.......................................................................................................................................... 22
Scanning Speed ....................................................................................................................................... 22
Positioning the Scanner for the First Scan............................................................................. 23
Scanning Overview.................................................................................................................. 23
Scanning Live View .................................................................................................................. 24
Scanning Options..................................................................................................................... 25
Adjust Live View Window Size ............................................................................................................ 25
Adjust the Scanning Field of View..................................................................................................... 26
Evaluating Your Model............................................................................................................. 26
Checking Your Model For Missing Data ................................................................................................... 26
Eraser Tool ................................................................................................................................ 27
Reset Model.............................................................................................................................. 27
Delete Model ............................................................................................................................ 27
Scanning Occlusion Data......................................................................................................... 28
Scanning a Bite Registration................................................................................................... 28
Bite registration preparation........................................................................................................................ 28
Bite registration scanning ............................................................................................................................. 29
Goals ............................................................................................................................................................ 29
Selecting the Bite Registration .............................................................................................. 30
Scanning Buccal/Opposing ..................................................................................................... 31
Scan Opposing.................................................................................................................................................. 31
Scan Buccal Bite................................................................................................................................................ 32
Model Alignment ..................................................................................................................... 32
Rotating the Models........................................................................................................................................ 33
Scanning a Pre-op.................................................................................................................... 34
Scanning Impressions ............................................................................................................. 35
Positioning the Scanner................................................................................................................................. 35
Scanning the Impression............................................................................................................................... 36
Margin Tab...............................................................................................37
Orientation ............................................................................................................................... 37
Margin Tool............................................................................................................................... 37
Margin Aids ........................................................................................................................................................ 38
View ICE Preparation.............................................................................................................................. 38
4 Planmeca PlanScan User Manual

Show Features .......................................................................................................................................... 38
Creating the Margin ........................................................................................................................................ 38
Paint tool .................................................................................................................................................... 38
Trace tool.................................................................................................................................................... 39
Lasso tool.................................................................................................................................................... 40
Margin Tab Settings................................................................................................................. 40
ICE Margin Mode.............................................................................................................................................. 40
For intraoral cases only................................................................................................................................... 40
Modifying the Margin.............................................................................................................. 40
Toggle Margin........................................................................................................................................... 40
Move Margin tool .................................................................................................................................... 41
Add Segments tool................................................................................................................................. 41
Preview Library......................................................................................................................................... 41
Retract....................................................................................................................................... 42
Multiple Restorations .............................................................................................................. 43
Selection Area Tool .................................................................................................................. 43
Drawing Pontic Margins .......................................................................................................... 44
Exporting Data ........................................................................................45
Exporting a CAD/CAM Case..................................................................................................... 45
Exporting 3D Models............................................................................................................... 45
3D Model Export .............................................................................................................................................. 45
DDX Export ............................................................................................................................... 45
Scanner Specications.............................................................................47
Cables .......................................................................................................................................................... 47
Applicable Standards .............................................................................................................. 47
Product Safety .......................................................................................................................................... 47
EMC............................................................................................................................................................... 47
Laser Product Safety............................................................................................................................... 47
Packaging and Environmental............................................................................................................ 48
Biocampatibility....................................................................................................................................... 48
European Standards ............................................................................................................................... 48
Canadian Standards ............................................................................................................................... 48
US Food and Drug Administration.................................................................................................... 48
International Standards ........................................................................................................................ 48
Approvals (All Systems)........................................................................................................... 48
Guidance and Manufacturer’s Declaration - Electromagnetic Emissions ........................... 49
Guidance and Manufacturer’s Declaration - Electromagnetic Immunity............................ 49
Recommended Separation Distances ...................................................................................................... 51
PlanScan Optical Specications.................................................................................................................. 52
Labels........................................................................................................................................ 53
Symbols ............................................................................................................................................................... 53
Firewire Warning Label................................................................................................................................... 54
Product Identication Labels....................................................................................................................... 54
External Components and Connectors.................................................................................................... 55
Internal Fuse.............................................................................................................................................. 55
UL Listing............................................................................................................................................................. 55
UL Medical Equipment Listing............................................................................................................ 55
Troubleshooting/Repair ..........................................................................56
10828200.B 5

6 Introduction Planmeca PlanScan User Manual
Planmeca
1 Introduction
The Planmeca FitTM System is a complete optical impression system for CAD/CAM of dental
restorations intended for dental oces or laboratories. The system comprises a Planmeca
PlanScan digital impression scanner, Planmeca Romexis CAD/CAM design software module,
and Planmeca PlanMill40 mill.
The Planmeca PlanScan scanner takes digital impressions which can be designed and
customized on the Planmeca Romexis CAD/CAM design software. The impressions can be sent
via Planmeca Romexis Cloud to Planmeca or a certied laboratory for design and milling or
exported to a third party.
Note: Caution: US Federal law restricts the Planmeca PlanScan to sale by or on the
order of a dentist.
The Planmeca Fit System requires Planmeca Romexis software revision 3.4.0.R or later.
Associated Documentation
Planmeca Romexis User’s Manual (publication number 10014593).
Note: Throughout the documentation, important notes and items of interest are
formatted like this example.
Warning The orange Warning denotes something that can cause personal injury or
physical damage to the equipment.
Some of the screenshots may have been taken in earlier software versions and may not exactly
match your screen.
Indications for Use
The Planmeca PlanScan System is an optical impression system for CAD/CAM of dental
restorations. It is a device used for recording topographical characteristics of teeth, dental
impressions, or stone models by digital methods for use in computer aided design and
manufacturing of dental restorative prosthetic devices.
Contraindications
The Planmeca impression system is not indicated for orthopedics or any indication beyond
dentistry.

10828200.B Introduction 7
Turn ON Laptop
Press the power button to start the laptop.
The Windows 8 Start screen appears. On your keyboard, press the key to make the
standard desktop appear if desired.
Opening Romexis
Click the Romexis icon on your desktop to open the software.
Scanner
Removable Components
The PlanScan system has a set of removable components.
Connecting the Thunderbolt™ Adapter
Properly connecting and disconnecting the scanner prevents damage to your devices.
1 Insert the Thunderbolt adapter into the adapter slot on the side of the
laptop. (The adapter should remain attached, even when not in use.)
2 After opening the Scan tab, connect the red FireWire connector of the
scanner into the white Thunderbolt™ adapter.
The laptop gives an audible signal to conrm that the connection is fully
seated.
To remove the scanner, hold the red end with one hand and with
the other hand grasp the Thunderbolt adapter. Gently pull apart to
disconnect. Leave the white Thunderbolt adapter attached to the
computer.
Disconnecting the Thunderbolt™ Adapter
If you wish to remove the adapter from the laptop:
1 Disconnect the scanner and exit Romexis to the Windows desktop.
2 Navigate to the Eject Media icon in the lower left corner of the desktop.
3 Click the icon and choose Eject IEEE 1394 Controller.
4 Remove the Thunderbolt adapter from the laptop.
Note: Failure to follow this procedure may result in an inoperable scanner.
For additional questions or concerns please contact Customer Support at
800.537.6700.

8 Introduction Planmeca PlanScan User Manual
Scanner Indication Lights
There are colored LED lights in the button on the scanner.
• Green - Ready for Use. Scanner is connected, but not actively scanning.
• Blue - Laser ON. Scanner is actively scanning.
If scanner light is not illuminated, the scanner is not ready or it is not connected.
Cradle
The system comes with a standalone cradle for the scanner.
The cradle can be separated and inserted into a 5/8 inch (16 mm) holder in your operatory
equipment (i.e. the slow speed suction holder).
Moving/Viewing the 3D Model
Use the mouse to zoom in or out, move, and rotate the composite model.
Using the Mouse
Rotating the Model
1 Click and hold down the right mouse button.
2 Drag the mouse horizontally, vertically, or diagonally to
rotate the image.
Drag in small increments for more control.
3 Release the mouse button to stop rotating. Repeat as needed.
Changing the Model Size
Use the scroll wheel on the mouse to zoom in and out
on the model.
1 Position the pointer on your model.
2 Rotate the mouse wheel downward, toward your wrist.
3 Rotate the mouse wheel upward, away from your wrist.
Rotate Model
press and hold the
right button, then
drag
Zoom Model
rotate the wheel
button to change the
size of the model on
the screen

10828200.B Introduction 9
The model becomes larger.
Moving the Model
The model can be moved without being rotated.
1 Position the pointer on the model.
2 Press and hold down the mouse wheel.
3 Drag the model to the desired position and release the
mouse wheel.
System Options and Default Settings
Individual tabs are used to design the restoration: Setup, Scan, Margin, Design, and Mill. The
tabs are dynamic. The choices you make on each tab aect the options available on that and
related tabs. The typical restoration utilizes the tabs from left to right. Moving backwards in
the process (e.g., modifying the settings in the Margin tab after completing the design in the
Design tab) can cause settings and designs to be discarded. The system warns you when your
actions will cause design data to be discarded.
Some system congurations will restrict the use and access of individual tabs.
Screenshots
Save an image of the screen for communicating with associates or Customer Support. To take
and save a screenshot:
ASUS: Press + Prt Sc keys simultaneously.
HP: Press + Fn + Prt Sc keys simultaneously.
The computer takes a screenshot and saves it in Libraries - Pictures - Screenshots.
The screenshots are automatically numbered. You can rename them if desired.
The Settings Screens
Click the Settings button on the CAD/CAM screen or
the Settings button on each tab. These screens contain
preference settings that modify the default behavior of the
software. The settings are based on each screen. Use the
arrows to scroll right or left. Click a category to select it.
Selected categories display in the bottom of the screen.
Click Restore Factory Defaults to revert to original settings,
click Save to save changes, or click Cancel to exit without
saving.
Version
Displays the version of the software and imaging systems.
Reset Warnings
The warning and reminder screens have an option to Do Not Show This Message Again. If a
new operator is using the system, you can reactivate these warnings.
Move Model
up/down, left/right:
press and hold the
wheel button, then
drag.

10 Introduction Planmeca PlanScan User Manual
Sprue Angle Method
(For mill systems)
Margin Ramp
(For design systems)
Spacer Thickness
(For design systems)
Dropper Tool
(For design systems)
Spaceball Settings
(Optional accessory)
Network Settings
This screen should be used only under the supervision of a customer service representative.
These settings are pre-congured and should not be changed.
Workbook Exercises
(For Classic systems)
Mill Notication Settings
(For Classic systems)
Milling Settings
(For mill systems)
Auto or Occlusal POI
(For mill systems)

Administration
This chapter describes the administrative functions associated with the Planmeca PlanScan
System.
Relocating the Laptop and/or Scanner
The laptop can be unplugged and moved as needed. The software does not need to be shut
down. The scanner can be disconnected at any time.
System Information and Upgrades
Software and Hardware
System software and hardware upgrades are initiated through Planmeca only. Nosoftware or
hardware should be added or deleted to/from the Planmeca systems without prior approval of
Planmeca. Doing so may result in damage to the system and will void the product warranty.
Connecting the Scanning Tip
(After disinfection if scanning intraorally. See insert with scanning
tips for further details.)
1 Grasp the body of the scanner with one hand.
2 Use the other hand to press the scanning tip onto the scanner as
shown. A locking click is heard once the tip is fully seated.
Disconnecting the Scanning Tip
1 Grasp the body of the scanner with one hand.
2 With your other hand depress the green button on the
underside of the scanner. Gently pull the tip from the
scanner.
To prevent damage to the scanner, pull the pieces
apart gently and without twisting or bending.
When the scanner is not in use, place the non-functional protective scanner tip on the scanner.
(Included with the scanner during shipping.)
Note: Failure to follow this procedure can in damage to scanner and scanningtip.
10828200.B Administration 11
E4D
Planmeca
2

12 Administration Planmeca PlanScan User Manual
Cleaning the Scanner Tip
For intraoral scanning systems only.
The following instructions are for the removable tip of the scanner. It is not for the entire
scanner. See “Cleaning the System”on page 14 for cleaning the base of the scanner.
The scanning tips have been manufactured and tested for specic disinfection protocols.
Operational, maintenance and replacement instructions should be followed for the
product to perform as designed. Cleaning the scanner tip incorrectly may result in
incomplete disinfection and/or permanent damage to the tip.
Tip Identication
Autoclave Tips have the autoclave
symbol. See “Instructions for
Autoclaveable Tips” on page 13.
High Level Disinfection Tips have no
symbol. See “Instructions for High Level
Disinfection Tips” on page 14.
Note: Autoclavable tips compatible with PlanScan version 5.5 or later.

10828200.B Administration 13
Instructions for Autoclaveable Tips
DO NOT use a chemical sterilant on tips with the autoclave symbol.
DO NOT Autoclave tips without the autoclave symbol.
DO NOT place in Ultrasonic Cleaner.
Excessive cycle times may prematurely reduce the life and function of the tip.
Note: These instructions were validated using a Class B autoclave and the
sterilization pouch HSD # 112-4854 with a minimum cycle of 132° C (269°F) with a
sterilization time of 5 minutes. You may use an autoclave pouch with comparable
materials and the same dimensions.
Look for the temperature symbol engraved on autoclaveable
tips. If the tip does not have this symbol, see “Instructions for
High Level Disinfection Tips”on page 14.
1 Clean the tip for 2 minutes under running tap water to remove
debris.
2 Individually pouch each scanner tip using an autoclave pouch
(ex. HSD # 112-4854 or a comparable product).
Note: Autoclave baskets are not indicated for this cleaningprocedure.
3 Place one to three pouches per tray or cassette.
4 Select the Wrapped, Wrapped Instruments, or Pouch cycle on the autoclave with a minimum
cycle of 132° C (269° F) with a sterilization time of 5 minutes. After cycle completion, store for
later use.
Note: Autoclave cycle names dier among manufacturers. Autoclave cycle times
exceeding 10 minutes could be considered excessive and may damage the
internal components and pin connector points. Referenceyour manufacturer’s
manual to select the cycle for sterilizing wrappedinstruments.
5 Prior to scanning, visually conrm the scanning
mirror and scanner connection points of the
scanning tip are clean and dry. To clean either
surface, use an optical cloth or 2x2 gauze with a
small amount of alcohol to gently remove residue.
Ensure each surface is dry before connecting it to
the scanner.

14 Administration Planmeca PlanScan User Manual
Instructions for High Level Disinfection Tips
DO NOT use a chemical sterilant on tips with the autoclave symbol.
DO NOT Autoclave tips without the autoclave symbol.
DO NOT place in Ultrasonic Cleaner.
Note: These instructions were validated using MaxiCide Plus w/ Activator (3.4%
Gluteraldehyde) disinfectant available from Henry Schein Dental (#102-2865).
1 Clean the tip for 2 minutes under running tap water at 22 - 25°C (4 liters/minute) to remove
debris.
2 Test the potency of your activated MaxiCide Plus prior to disinfection. (Recommend MetriTest
Strips by Metrex (HSD #602-3437)
3 Immerse the tip in activated MaxiCide Plus for 120 minutes (2hours).
Note: Do not leave the tips soaking overnight.
4 Remove tip from the disinfectant.
5 Rinse disinfected part in three separate copious amounts of distilled water (1000ml volume of
water; minimum of 2” head height while part is immersed).
Agitate the tip in the water for 30 seconds and then let it stand in the water for another 30
seconds.
6 Repeat the agitation and soak in each of the other two containers with fresh distilled water.
Storage
1 Wipe water o mirror using non-woven optical wipes (recommend Kimwipes Lens Cleaning
#101-7070).
2 Optional: Insert tip into a sterilization pouch. (recommend Self Seal Sterilization Pouch 5 ¼” x
10” [200/box] #112-4854)
3 Store for later use.
4 Prior to scanning, visually conrm the scanning
mirror and scanner connection points of the
scanning tip are clean and dry. To clean either
surface, use an optical cloth or 2x2 gauze with a
small amount of alcohol to gently remove residue.
Ensure each surface is dry before connecting it to
the scanner.
Cleaning the System
For intraoral scanning systems only.
Protect the keyboard with a disposable barrier.
Cleaning Cycle: Before and after each use, clean all areas of the Planmeca PlanScan System.

10828200.B Administration 15
Warning: Before and after each use, follow these instructions to disinfect the
Planmeca PlanScan System. Do not substitute any other cleaning solution or procedure.
Under no circumstances should you use any paint thinner, solvents, or harsh chemicals.
Use only a non-woven sponge or pre-moistened germicidal cloths when cleaning the
Planmeca PlanScan System.
1 Using a clean, non-woven sponge that has been saturated with a hospital grade, TB-rated
germicide or pre-moistened germicidal cloths, apply the germicide to the entire surface of the
scanner base, scanner holder, mouse, mousepad, and any other surfaces that you touch that
were not covered by a disposable barrier. Do not spray the germicide directly on the items and
do not submerge the scanner or mouse in the germicide.
2 Follow the germicide manufacturer’s instructions.
Additional Assistance
Go to http://e4d.com for videos and downloadable documentation. If you have questions,
please contact Customer Support at:
Toll Free 800-537-6070
E-mail [email protected]
Fax [phone]
Hours of Operation 7 am – 7 pm CT (Monday - Thursday)
8 am – 5 pm CT (Friday)
Web site www.e4d.com
Mailing Address
D4D Technologies LLC dba E4D Technologies
650 International Pkwy
Richardson, TX 75081 USA

Scanning Safety
Warning: Failure to adhere to all safety warnings may result in personal injury, equipment damage, or
data loss.
Do not use the Planmeca products for any purpose other than its intended and labeled use.
To prevent electrical shock, do not open any sealed or user restricted access panels or connectors.
In case of emergency unplug the computer power cord from the wall or from the computer.
Do not make any unauthorized repairs or modications to the system software or hardware. This includes
installing unauthorized software on the host computer system or altering or bypassing any safety
switches or mechanisms. Changes or modications not expressly approved by Planmecacould void the
user’s authority to operate the equipment and/or void the warranty.
Do not install or operate the Planmeca products in an environment where an explosion hazard exists, e.g.,
high oxygen area.
Comply with all applicable regulations when disposing of waste materials from the Planmeca products.
Do not attach any equipment or devices to the Planmeca products unless their use has been specically
authorized by Planmeca or E4D Technologies.
Medical electrical equipment requires special precautions regarding EMC (Electromagnetic Compatibility).
The Planmeca products must be installed and placed into service according to the EMC information
provided in the documentation that accompanies the Planmeca products.
Portable and mobile RF (Radio Frequency) communications equipment can aect medical electrical
equipment.
The wireless components in the Planmeca products may be interfered with by other equipment,
even if the other equipment is fully compliant with CISPR (International Special Committee on Radio
Interference) emission requirements.
When possible, electrical equipment should not be used when adjacent to other electrical equipment.
If adjacent use is necessary, the equipment should be observed to verify normal operation in the
conguration in which it will be used.
When connecting the Planmeca components, use only the cables supplied with the products.
Failure to do so may result in increased electromagnetic emissions or reduced immunity to external
electromagnetic emissions.
If you suspect equipment malfunction or failure, discontinue using the Planmeca products and contact
Technical Support immediately. Do not attempt to make any repairs on the Planmeca products.
Read and comply with all safety, warning, and instructional labels on the Planmeca products.
Avoid eye exposure while using the color tip. LEDs contained in this device pulse at a frequency that may
elicit reactions in sensitive individuals. These reactions may include seizures.
16 Scanning Safety Planmeca PlanScan User Manual
Planmeca
3

Patients
Managing Patients in Planmeca Romexis
Creating new patients
1 In Patient Management, click the Add Patient button.
The Add Patient screen opens.
2 Enter the necessary information and add a face photo if desired.
Note: The obligatory elds are in bold text. See the Romexis User Manual for more
information.
3 To save the patient into the database click the Save button in any section.
Note: The changes are not saved unless Save button is used.
Note: To view the newly created patient on the list, perform new patient search.
Searching Patients
Patients can be searched by ID or by name.
In Patient Management, type any part of the patient’s name or ID number into the Search eld.
Matching items automatically appear as you type.
Note: The system looks for the letters or numbers anywhere in the patient’s name
or ID. Angela, Angie, and Dangereld are all matches for“ang”in the Search eld.
Sorting patients
Patients in the patient list can be sorted by the Date their records were previously accessed,
their ID number, or their last Name.
10828200.B Patients 17
E4D
Planmeca
4

18 Patients Planmeca PlanScan User Manual
To sort patients click the desired sort button.
Selecting and opening patients
1 Click the patient name in the patient list.
The patient’s le opens.
The name of the active patient is always visible in the upper right corner of the screen. Several
patient records can be open at a time but only one of the open records is active at a time.
To close the active patient click the Close Patient button.
To view all open patients click the arrow of the drop-down menu.
To select and modify another open patient, select the name from the drop-down menu.
2 Click Go to CAD/CAM in the Next Steps section at the bottom of the screen.
Managing Cases
1 Open the desired patient.
2 Click Go to CAD/CAM.
Select what you want to do:
• Start a new restoration - See below for more information
• Open an existing restoration - See below for more information
• Import 3D models - See Planmeca Romexis User’s manual for more information
• Export 3D models - See Planmeca Romexis User’s manual for more information

10828200.B Patients 19
Deleting Files
To delete an image (stl le) from the patient’s case les right-click on the le and select
Inactivate STL.
To delete a case from the patient’s case les right-click on the case and select Inactivate
restoration.
To reactivate or permanently delete a case from the database see the Romexis User Manual.
Starting a New Restoration
1 To start a new scan, click New Scan and Design.
Note: Click New Scan Only if you do not have a design license.
2 To open an existing scan or restoration (crown, inlay, onlay, etc.) double-click a case on the list
or click the Open Restoration button.
The case opens in the Planmeca PlanScan Setup tab.
Setup tab
Use the Setup screen to set the restoration type, occlusal data type, material, and tooth library.
If you open an existing restoration, many of these settings may already be selected.
Note: The Setup tab must be lled out for Margin, Design, and Milling. For Scan
Only cases, click the Scan tab at the top to skip the Setup tab.
See the PlanCAD manual for details on lling out the Setup tab.

Scanning
Warning The scanner is a high precision Class 2 laser scanning instrument. Always store the
scanner in its cradle when not in use. To prevent damage or misalignment, do not drop or strike
the scanner. Follow all stated precautions when using the scanner.
The scanner captures the restoration site with a laser system and delivers live images to the
monitor. As you capture images, the system creates a composite model, revealing any areas
that need further scanning.
Ensure the power cord is being used on the laptop while scanning.
Scan Tab Layout
1 Scan Type
2 Scanner Indicators
3 Model Editing Tools
4 Evaluation Tools
5 Alignment Tools
1
3
4
5
2
20 Scanning Planmeca PlanScan User Manual
Planmeca
5