Plantronics Savi W745 Installation guide

Savi W745
Multi Device Wireless Headset System
A Complete Overview for Conversation Users

Savi745 Wireless Headset: A Complete Overview For Nemsys Conversation Clients
Nemsys LLC : 122 S. St Clair, Toledo, Ohio 43604 : 419-243-3603 : www.nemsys.com
2
Contents
Hardware ............................................................................................3
Charging Device ................................................................................4
Headset Controls ...............................................................................4
Answering a Call ................................................................................4
Spare Battery ......................................................................................5
To use the spare battery in headset .....................................................5
Connecting Mobile to Headset ................................................................5

Savi745 Wireless Headset: A Complete Overview For Nemsys Conversation Clients
Nemsys LLC : 122 S. St Clair, Toledo, Ohio 43604 : 419-243-3603 : www.nemsys.com
3
Hardware

Savi745 Wireless Headset: A Complete Overview For Nemsys Conversation Clients
Nemsys LLC : 122 S. St Clair, Toledo, Ohio 43604 : 419-243-3603 : www.nemsys.com
4
Charging Device
To charge your device:
Place your heard set in the cradle, making
sure to align the charging cradle pins.
The headset and battery charging LEDs
flash green when charging the headset and
battery.
The charging LEDs turn solid green,
independently of each other, when the
headset/battery is full charged
Headset Controls
Answering a Call
To answer an incoming call from the desk
phone, mobile phone, or computer is to press
the headset call button when you hear an
incoming call.
1. Headset charging LED
2. Spare battery charging
LED
1. Volume/Mute button
a. Increase the volume: Press volume
button up.
b. Decrease the volume: Press volume
button down.
c. Mute/Unmute a call: Press the volume
button in.
d. Go between calls: Press the volume
button up or down for 1.5 seconds
2. Call button: Place, answer or end a call
with a short press of this button.
3. Headset LED: Flashes white when in use

Savi745 Wireless Headset: A Complete Overview For Nemsys Conversation Clients
Nemsys LLC : 122 S. St Clair, Toledo, Ohio 43604 : 419-243-3603 : www.nemsys.com
5
Spare Battery
The headset does not need to be docked for the spare battery to charge
To use the spare battery in headset
Step 1: Open the battery compartment door on the side of
the charging cradle, by pressing the handle down and remove
the battery.
Step 2: Slide the battery off the headset to disconnect.
Step 3: Slide the charged battery on the headset until you hear a click.
Step 4: Place the used battery in the battery compartment and close the
door.
Connecting Mobile to Headset
Step 1: Press and hold the Bluetooth pairing button
on the Save base for approx. 4 seconds, until the
indicator LED flashed blue and red. The base should
remain in this mode for 10 minutes; if it goes off,
you will need to press again
Step 2: Place Bluetooth on mobile device into
search mode, select SAVI W745 from the list of
found devices.
Step 3: If prompted for a passcode, type 0000.
Step 4: Bluetooth indicator on LED base will turn solid blue when base has
an active connection with the mobile phone.