Portfolio LWS1204C 0338651 User manual

1
MODEL #LWS1204C
ITEM #0338651
WALL LANTERN
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. -
5 p.m., EST, Friday.
ATTACH YOUR RECEIPT HERE
Serial Number Purchase Date
Portfolio ® is a registered trademark
of LF, LLC. All Rights Reserved.
EB1528 Lowes.com/portfolio

PART DESCRIPTION QUANTITY
A
B Fixture Body
Fixture Loop Assembly 1
1
PACKAGE CONTENTS
2
B
A
B
B
Lowes.com/portfolio

HARDWARE CONTENTS (shown actual size)
Mounting
Screw
Qty. 2
Outlet
Box
Screw
Qty. 2
Crossbar
Qty. 1
EEDD FFCC
Hex Nut
Qty. 2
3
SAFETY INFORMATION
AA BB
Wire
Connector
Qty. 3
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not
attempt to assemble the product.
Estimated Assembly Time: 20 - 30 minutes
Tools Required for Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers,
Wire cutters, Electrical tape, Safety goggles, Ladder and Caulk.
Helpful Tools (not included): Wire strippers
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
WARNING
• RISK OF ELECTRIC SHOCK - Before beginning installation, turn off electricity at the circuit
breaker box or the main fuse box.
• RISK OF FIRE - Use bulbs specified by the markings and/or labels on the fixture.
CAUTION
• For your safety, read instructions completely before beginning installation.
• If in doubt about electrical installation, consult a licensed electrician.
• Turn off electricity to fixture before replacing the bulb(s).
Green Ground
Screw
[preassembled
to Crossbar (GG)]
Qty. 1
GG
Mounting
Ball
Qty. 2
Lowes.com/portfolio

4
ASSEMBLY INSTRUCTIONS
1. Thread the fixture loop assembly (A) into the
hex coupling on the top of fixture body (B). hand
tighten until snug.
2. Rotate the flat scroll to the top of the fixture. pull
the scroll end into the fixture loop (A). Flat Scroll
1
2
Hex Coupling
B
A
A
Lowes.com/portfolio

5
Hardware Used
DD x 2
Outlet Box
Screw
4. Secure the crossbar (GG) to the outlet box (not
included) with outlet box screws (DD).
I
4
Outlet Box GG DD
ASSEMBLY INSTRUCTIONS
3. Install the mounting screws (CC) in the
aligned threaded holes on the crossbar (GG),
threading the hex nuts (FF) onto the mounting
screws (CC) as shown.
3
CC FF
GG
Hardware Used
CC x 2
Mounting
Screw
Hex Nut
FF x 2
Crossbar
GG x 1
Lowes.com/portfolio

Hardware Used
x 2
EE
EE
CCGG
Mounting
Ball
Outlet Box
B
6
6
ASSEMBLY INSTRUCTIONS
5. Attach ground fixture wire to either the green
ground screw (AA) on crossbar (GG) or to the
ground wire in the outlet box (usually GREEN
or BARE). If attaching fixture ground wire to
the crossbar (GG), it is imperative the outlet
box in your home be properly grounded.
Connect the neutral WHITE or RIBBED side
fixture wire to the neutral usually WHITE wire
from the outlet box. Connect the hot BLACK
or SMOOTH side fixture wire to the hot
usually BLACK wire from the outlet box.
Fasten wires together with a wire
connector (BB) and tightly wrap wire connector
(BB) with electrical tape (not included).
6. Carefully tuck all wires into the outlet box and
position the backplate of the fixture body (B)
over the outlet box. Align the holes in the
backplate of the fixture body (B) with the
mounting screws (CC) attached to the crossbar
(GG). Pass the fixture over the mounting screws
(CC) and secure by threading mounting balls
(EE) onto end of mounting screws (CC). Tighten
until snug.
5
White Wire
From Outlet Box
Black Wire
From Outlet Box
Bare, or Green
Ground Wire Bare, or Green
Fixture Ground Wire
From Outlet Box
Bare, or Green
Ground Wire
From Outlet Box
White or
Ribbed Side
From Fixture
From Fixture
Black or
Smooth Side
OR AA
BB
Hardware Used
AA x 1
Green
Ground
Screw
BB x 3
Wire
Connector
Lowes.com/portfolio

7Bulb
7
ASSEMBLY INSTRUCTIONS
GK
J
I
EE
8
9
8. To prevent moisture from entering the wire
compartment, apply a small amount of silicone
sealer (not included) to the threaded side of the
mounting balls (EE) and then install them onto the
mounting screws (CC). Wipe off excess caulk.
Silicone Sealer
Silicone Sealer
9. Make sure exterior wall surface and fixture
backplate are free of dirt before applying caulk.
Using silicone sealer, start on one side of fixture
backplate and follow contour, where the fixture
backplate meets the exterior wall surface upward.
Proceed to caulk over top of backplate and down
other side.
Do not caulk bottom of fixture backplate to ensure
proper moisture drainage.
Outdoor Fixture
Backplate
Exterior Wall
Surface
SILICONE SEALER
SILICONE SEALER
SILICONE SEALER
Lowes.com/portfolio
7. Install (2) 60-watt max. candelabra-base
incandescent bulbs or use (2) 13-watt max. spring
self-ballasted candelabra-base CFLs (none included).

8
CARE AND MAINTENANCE
• Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives
to clean fixture as they may damage the finish.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Bulbs will not light. 1. Bulb is burned out.
2. Power is off.
3. Faulty wire connection.
4. Faulty switch.
1. Replace light bulb.
2. Make sure power supply is on.
3. Check wiring.
4. Test or replace the switch.
Fuse blows or the
circuit breaker trips
when light is turned
on.
Crossed wires or power wire is
grounding out. Check wire connection.
WARRANTY
The manufacturer warrants all of its lighting fixtures against defects in materials and workmanship for
five (5) years from the date of purchase. If within this period the product is found to be defective in
material or workmanship, the product must be returned, with a copy of the original sales receipt as
proof of purchase in the original carton, to the place of purchase. The manufacturer will, at its option,
repair, replace or refund the original purchase price to the consumer. This warranty does not cover
fixtures becoming defective due to misuse, accidental damage, improper handling and/or installation
and specifically excludes liability for direct, incidental or consequential damages. As some states do
not allow exclusions or limitations on an implied warranty, the above exclusions and limitations may
not apply to you. This warranty gives you specific legal rights. You may have other rights that vary
from state to state.
Lowes.com/portfolio

9
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST,
Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday.
PART DESCRIPTION PART #
AA Green Ground Screw
BB Wire Connector
CC Mounting Screw
DD Outlet Box Screw
EE Hex Nut
FF
Mounting Ball
GG Crossbar
HH Candle Cover
II
9451KIT
M2227CCK
AA
EE
FF
GG
HH
BB
CC
DD
Printed in China
Portfolio ® is a registered
trademark of LF, LLC.All
Rights Reserved.
Lowes.com/portfolio
2015-01-12