PotteryBarn HUDSON BED User manual

Page 1of 3
HUDSON BED QUEEN, KING & CALKING
Date : 21-April-16
Rev : -www.potterybarn.com

Page 2of 3
Important Safety Instructions:
Please read all instructions carefully before assembling.
Foryoursafety, assembly by two ormore adults is strongly recommended.
Keep instructions for future use.
Use only vendor supplied hardware to assemble. Using unauthorized hardware could jeopardize the structural
integrity of the item.
Parts Enclosed Box 1:
(A) Headboard –1x
(B) Footboard –1x
1. Attach theSide Rails (C) to Headboard and Footboard by insertingthe hooks ends into the correspondingslots.
Makesure that theconnections are secure as shown in fig. 1, illustration. 1.
2. Attach the Leg Supports (D) to the Slats (E) by inserting the hanger bolts intothe inserts on theSlats (E). Hand
tighten until snug as shown in fig. 2, illustration. 2.
NOTE: Legsupports have adjustable glides at the bottom and can be adjusted to allow the slats to sit/stay evenly.
F.
Screw 8 x 1 ¼” – 10x
Parts Enclosed Box 2:
(C) Side Rails - 2x
(D) Leg Supports - 5x
(E) Slats - 5x
L
e
g
S
u
p
p
o
r
t
Fig. 2
Fig. 1
Illustration. 1
Hardware Enclosed Box 2:
D
E
Illustration. 2
A
B
C
D
E

Page 3of 3
3. Lay the Slats (E) in place over themattresssupport and insert theScrews (F) into the holes at the end ofthe Slats
(E). Tighten with a Screwdriver (Not Included) as shown in fig. 3, illustration. 3.
Care Instructions:
Dust often using aclean, soft, dry and lint-free cloth.
Blotspills immediately and wipe with aclean, damp,cloth.
We do not recommend the use ofchemical cleansers, abrasives or furniture polish on our lacquered finish.
Fig. 3
Illustration. 3
Thank you for your purchase
stores | catalog | www.pott erybarn.com