PRASTEL EASYBKA Operating instructions

EASYBKA/R SIMPLIFIED PROGRAMMING ACCESS CONTROL
1) Wiring:
EASYBKA / EASYBKR
Red wire / + = +VDC
Black wire / -= Ground
Purple wire / COM = COM
Grey wire / NO = NO Contact
Brown wire / NC = NC Contact
Green wire / REX1 = Command
Black wire / - = Ground
White wire / REX2 = Command
Black wire / - = Ground
Blue wire / COM = COM
Yellow wire / NO = NO Contact
Orange wire / NC = NC Contact
12-24 VAC/DC
Main Relay Contact
Main Relay Pushbutton
Auxiliary Relay
Auxiliary Relay Contact
2) Programming:
By default the programmed codes are:
• Programming code = 1234
• Unique User code (Locking relay) = 2580
• Unique User code (Auxiliary relay) = 0852
ZI Athélia, II
225, impasse du Serpolet
13704 La Ciotat Cedex
Tél. [phone]
www.prastel.com
ISEASYBK_EN_S_07_18.pdf

EASYBKA/R SIMPLIFIED PROGRAMMING ACCESS CONTROL
A) Programming code modification:
•Press the # touch twice: “the left indicator turns off and the right indicator
turns red”.
•Enter the master code: 1 2 3 4: “the right indicator turns green”.
•Press touch 3: “both indicator turns green”.
•Enter the new 4-digit master code: “the keypad beeps 3 times and the right
indicator goes off”.
B) RELAY 1’s code modification:
•Press the # touch twice: “the left indicator turns off and the right indicator
turns red”.
•Enter the master code: “the right indicator turns green”.
•Press touch 1: “the left indicator turns red”.
•Enter the new 4-digit unique user code: “the keypad beeps 3 times, the
left indicator turns green and the right indicator goes off”.
C) RELAY 2’s code modification:
•Press the # touch twice “the left indicator turns off and the right indicator
turns red”.
•Enter the master code “the right indicator turns green”.
•Press touch 2 “the left indicator turns orange”.
•Enter the new 4-digit unique user code: “the keypad beeps 3 times, the left
indicator turns green and the right indicator goes off”.
Return to factory default settings:
- Unplug the power supply.
- Plug simultaneously the green and black wire.
- Re-plug the power supply.
During 15 seconds the programming code is 1234.
- Press the # touch twice , the right indicator turns red.
- Enter the programming code (4 digits), the right indicator turns green.
- Press touch 0 twice, both indicators blinks red.
- Enter the programming code (4 digits): “the keypad beeps 3 times, the left
indicator turns green and the right indicator turns off.
- Unplug the green wire.
ZI Athélia, II
225, impasse du Serpolet
13704 La Ciotat Cedex
Tél. [phone]
www.prastel.com
ISEASYBK_EN_S_07_18.pdf