Pride Mobility Pride Profile INFMANU2127 Assembly instructions

ACN# 088 609 661
Pride Profile

2 Installation and Care Instructions
Pride Profile www.pridemobility.com Rev B/January 2003
The symbols below are used throughout this manual and on the product to
identify warnings, cautions, and notes. It is very important for you to read
and understand the information that follows these symbols completely.
NOTE: Indicates important things to remember when using this
product.
CAUTION: Failure to heed the cautions in this manual may result in
damage to your product.
WARNING: Failure to heed the warnings in this manual may result in
personal injury.
Using this product safely depends upon your diligence in following the
warnings, cautions, notes, and instructions in this owners manual. Safe
operation also depends upon your own good judgement and/or common sense,
as well as that of your provider, caregiver, and/or healthcare professional.
NOTE: Pride is not liable for damage to property or personal injury
arising out of unsafe use of this product. Pride is also not liable for
any property damage or personal injury arising out of the failure of
any person and/or user to following the instructions and
recommendations set forth in this manual or any other instructions
or recommendations contained in other Pride related literature issued
by Pride or contained on the product itself.
NOTE: We have compiled this manual from the latest specifications
and product information available at the time of publication. We
reserve the right to make changes, as they become necessary. Any
changes to our products may cause slight variations between the
illustrations and explanations in this manual and the product you
have purchased.
opyright © 2003
Pride Mobility Products
PRODUCTS SAFETY LABELS

Installation and Care Instructions 3
Pride Profile www.pridemobility.com Rev B/January 2003
INTRODUCTION
Welcome to Pride Mobility Products orporation (Pride). ongratulations
on the purchase of your new Pride Profile cushion. The Pride Profile is
designed with the most advanced state-of-the-art components to deliver
comfort, durability, and health maintenance features for active users.
This manual is intended as a supplement to the in-service training provided
by your authorized Pride provider. If you have any questions or problems
regarding the Pride Profile, please contact your authorized Pride provider.
USE
The Pride Profile is labeled to assure proper placement on the chair.
To place the Pride Profile on the chair:
1. Locate the Front Bottom label on the underside of the cushion.
2. Place the cushion on the seat so that the Front Bottom label is located
on the front of the seat, label side facing down. The zipper on the cushion
will face the rear side of the seat. See figure 1.
ZIPPER FACING
REAR SIDE OF SEAT
Figure 1. Cushion Placement

4 Installation and Care Instructions
Pride Profile www.pridemobility.com Rev B/January 2003
CLEANING
The Pride Profile can be easily cleaned.
To clean the Pride Profile:
1. Locate the zipper on the rear side of the outer cover. See figure 2.
2. Unzip the outer cover and pull out the inner cushion, which is wrapped
in a fluid resistant cover.
3. Wash the outer cover in a washing machine on the OLD setting.
CAUTION: Do not use bleach when washing the outer cover. Doing
so may cause damage to the cover.
4. Spray the inner fluid-resistant cover with a disinfectant, then wipe it clean.
CAUTION: Never submerge the inner cushion of your Pride Profile
in water. Doing so may cause damage to the cushion.
5. Allow both the outer cover and inner covers to air dry.
CAUTION: Do not attempt to put the outer cover in a dryer. This may
cause shrinking.
6. Once dry, put the inner cushion back inside the outer cover. Zip the outer
cover closed, and place the Pride Profile back onto the seat of your chair.
Figure 2. Pride Profile (Inner Cushion Removed)
OUTER COVER
INNER CUSHION WRAPPED
IN FLUID-RESISTANT COVER
ZIPPER ON
REAR SIDE

Installation and Care Instructions 5
Pride Profile www.pridemobility.com Rev B/January 2003
STORAGE
The Pride Profile should not be stored in extreme heat or cold temperatures.
WARRANTY
The Pride Profile cushion is designed and produced to the highest of standards.
Our Pride Profile cushion is guaranteed to be free of defects in material and
workmanship for a period of 24 months. If any defect in material or
workmanship is found, Pride Mobility Products will repair or replace, at our
discretion, the Pride Profile cushion. This warranty does not apply to cushions
abused or misused by the user and deemed such by Pride Mobility Products.
laims and repairs should be processed through the nearest authorized Pride
provider.

Pride Mobility Products Corporation
182 Susquehanna Avenue
Exeter, PA 18643
USA
Pride Mobility Products Company
380 Vansickle Road, Unit 350
St. Catharines, Ontario L2R 6P7
Canada
Pride Mobility Products Ltd.
Unit 106, Heyford Park Camp Road
Upper Heyford, Oxfordshire OX25 5HA
Pride Mobility Products Australia Pty. Ltd.
21 Healey Road
Dandenong, 3175
Victoria, Australia
Pride Mobility Products Italia s.r.l.
Via della Tecnica, 14
Prato della Corte
00065 Fiano Romano
Roma - Italia
Pride Mobility Products Europe B.V.
Tijmuiden 28
1046 AL Amsterdam
The Netherlands
www.pridemobility.com
www.prideservice.com
www.prideprovider.com
INFMANU2127/REV B/JANUARY 2003