Pro-Form 831.288300 User manual

USER'S MANUAL
Patent Pending
SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
Model No. 831.288300
Serial No. _
Write the serial number in the space
above for future reference.
Serial
Number
Decal

2
FULL 90 DAY WARRANTY
For 90 days from the date of purchase, if failure occurs due to defect in material or workmanship in this
SEARS BIKE EXERCISER, contact the nearest SEARS Service Center throughout the United States
and SEARS will repair or replace the BIKE EXERCISER, free of charge.
This warranty does not apply when the BIKE EXERCISER is used commercially or for rental purposes.
This warranty gives you specific legal rights, and you may also have other rights which vary from state
to state.
SEARS, ROEBUCK AND CO., DEPT. 817WA, HOFFMAN ESTATES, IL 60179
TABLE OF CONTENTS
FULL 90 DAY WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
HOW TO USE THE PROFORM¨990S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
MAINTENANCE AND STORAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
NOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of serious injury, read the following important precautions before
using the PROFORM¨990S.
1. Read all instructions in this manual before
using the 990S.
2. It is the responsibility of the owner to
ensure that all users of the 990S are
adequately informed of all precautions.
3. Use the 990S indoors, on a level surface.
Keep the 990S away from moisture and
dust. Place a mat under the 990S to protect
the floor or carpet.
4. Inspect and tighten all parts regularly.
Replace any worn parts immediately.
5. Keep children and pets away from the 990S
at all times.
6. The 990S should not be used by persons
weighing more than 250 pounds.
7. Wear appropriate clothing when exercising;
do not wear loose clothing that could
become caught on the 990S.
8. Always wear athletic shoes when using the
990S.
9. Always keep your back straight when using
the 990S. Do not arch your back.
10. If you feel pain or dizziness at any time
while exercising, stop immediately and
begin cooling down.
11. Use the 990S only as described in this
manual.
12. The 990S is intended for in-home use only.
Do not use the 990S in a commercial, rental,
or institutional setting.
WARNING: Before beginning this or any exercise program, consult your physician. This is espe-
cially important for persons over the age of 35 or persons with pre-existing health problems. Read
all instructions before using. SEARS assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
The decal shown at the right
has been placed on the 990S. If
the decal is missing, or if it is
not legible, please call our toll-
free HELPLINE at 1-800-736-
6879 to order a free replace-
ment decal. Apply the decal in
the location shown.
3
Do not allow children on or
around machine.
Keep hands and feet away
from moving parts and contact
points.
Read owner's manual and
follow instructions.

4
BEFORE YOU BEGIN
Thank you for selecting the innovative PROFORM¨
990S. The 990S offers a unique form of low-impact
exercise that works both the upper body and the
lower body for greater cardiovascular benefits and
increased muscle toning. The 990S features
adjustable resistance to let you tailor your exercise
to the level thatÕs perfect for you. And when youÕre
not exercising, the 990S can be folded for compact
storage.
For your benefit, read this manual carefully before
you use the PROFORM¨ 990S. If you have addition-
al questions, please call our toll-free HELPLINE at
1-800-736-6879, Monday through Saturday, 7 a.m.
until 7 p.m. Central Time (excluding holidays). To help
us assist you, please note the product model number
and serial number before calling. The model number
is 831.288300. The serial number can be found on a
decal attached to the 990S (see the front cover of this
manual for the location of the decal).
Before reading further, please look at the drawing
below and familiarize yourself with the parts that are
labeled.
Handlebar
Resistance Knob
Pedaling Resistance Dial
FRONT
RIGHT SIDE
Seat
Seat Frame
Pedal
Pedal Strap
Lock Knob
Console
Wheels

5
ASSEMBLY
Place all parts of the PROFORM¨990S in a cleared area and remove the packing materials. Do not dispose of
the packing materials until assembly is completed.
Assembly requires the included tools and your own adjustable wrench .
36
36
1
2
1
1. Refer to the inset drawing. Loosen the Lock Knob (36)
on the right side of the Frame (1).
Slide the Seat Frame (2) out until it stops. Retighten
the Lock Knob (36).
2. Attach the Seat Bracket (58) to the Seat Frame (2)
with the two Seat Bracket Bolts (59) and 3/8Ó Nylon
Locknuts (37).
3. Set the two Seat Spacers (46) on the Seat Frame (2).
Attach the Seat (53) and the Seat Spacers to the Seat
Frame with the four Seat Screws (55).
2
58 2
59
37
353
46
2
55

6
4. Identify the Left Pedal (48) (there is an ÒLÓ on the
Left Pedal for identification). Using an adjustable
wrench, tighten the Left Pedal counterclockwise into
the left arm of the Crank (14). Tighten the Right
Pedal (not shown) clockwise into the right arm of the
Crank.
Adjust the Pedal Strap (30) on the Left Pedal (48) to
the desired position. Press the Pedal Strap onto the
adjustment tab on the Left Pedal. Adjust the Pedal
Strap on the Right Pedal (not shown) in the same
manner.
5. Remove the four stickers from the brackets on the
left and right sides of the Seat Frame (2).
Hold the Left Handlebar (6) inside the left bracket.
Insert the Long Carriage Bolt (13) through the
bracket and the Left Handlebar. Hold the Right
Handlebar (5) inside the right bracket. Insert the
Long Carriage Bolt through the bracket and the
Right Handlebar. Make sure that the Handlebars
are on the correct sidesÑthe ends should bend
outward slightly. Slide the Star Washer (11) onto
the Long Carriage Bolt and tighten the Resistance
Knob (7) onto the Long Carriage Bolt. Make sure
that the head of the Long Carriage Bolt is resting
in the square hole in the left bracket.
Note: To attach the Resistance Knob (7) on the left
side, reverse the positions of the Long Carriage Bolt
(13), Star Washer (11), and Resistance Knob.
6. If there is a rubber band around the Console (29),
remove it.
The Console (29) requires two ÒAAÓ batteries (not
included)Ñalkaline batteries are recommended.
Open the battery cover on the back of the Console.
Press two batteries into the battery clip. Make sure
that the negative (Ð) ends of the batteries are
touching the springs. Place the battery clip in the
Console and close the battery cover.
4
5
48
Adjustment Tab
30
6
13 Bracket
Bracket
11 7
2
5
14
Make sure that all parts are properly tightened before you use the PROFORM ¨990S.
6
29
Battery Clip
Battery
Cover

7
HOW TO USE THE PROFORM¨990S
HOW TO ADJUST THE POSITION OF THE SEAT
FRAME
The Seat Frame (2) can be adjusted to the position
that is the most comfortable for you. To adjust the
Seat Frame, first loosen the Lock Knob (36) on the
right side of the frame. Slide the Seat Frame forward
or backward to the desired position. Retighten the
Lock Knob.
HOW TO ADJUST THE PEDAL STRAPS
To adjust each Pedal Strap (31), first pull the end of
the Pedal Strap off the adjustment tab on the Pedal
(47). Align a different hole in the Pedal Strap with the
adjustment tab. Press the Pedal Strap onto the
adjustment tab.
HOW TO ADJUST THE PEDALING RESISTANCE
The pedaling
resistance can
be adjusted
with the
Resistance Dial
(8) located in
front of the
console. To
increase the
resistance, turn
the Resistance
Dial clockwise; to decrease the resistance, turn the
Resistance Dial counterclockwise.
HOW TO USE THE HANDLEBARS
For lower-body exercise only, hold the Handlebars
(5, 6) in a stationary position as you pedal.
For a full-body workout, move the Handlebars (5, 6)
up and down as you pedal. Be sure to keep your back
straight and your knees bent slightly. To vary the
intensity of your upper body exercise, the resistance
of the Handlebars can be adjusted. The resistance is
controlled with the Resistance Knob (7). To increase
the resistance, turn the Resistance Knob clockwise; to
decrease the resistance, turn the Resistance Knob
counterclockwise.
5
7
36
2
6
31
47
8
Adjustment
Tab

DIAGRAM OF THE CONSOLE
DESCRIPTION OF THE CONSOLE
The innovative console offers a manual mode and
three pacer programs. The pacer programs are
designed to help you achieve specific exercise goals
by pacing your exercise. The programs include a
stamina-building Interval program, an Aerobic
program, and a special Fat Burn program. Whether
you select the manual mode or one of the three pacer
programs, the consoleÕs six monitor modes will
provide continuous exercise feedback during your
workouts.
DESCRIPTION OF THE MONITOR MODES
¥ SpeedÑThis mode shows your pedaling pace, in
miles per hour.
¥ TimeÑIf you select the manual mode, this mode
will count up the length of time you have exercised.
If you select one of the three pacer programs, this
mode will count down the time remaining in the
program. Note: If you stop exercising, the time
mode will pause after a few seconds.
¥ DistanceÑThis mode shows the total distance you
have pedaled, up to 99.99 miles. The display will
then reset to zero and continue counting.
¥ Fat calories (FAT CALS)ÑThis mode shows the
approximate number of fat calories you have
burned. (See FAT BURNING on page 10 for an
explanation of fat calories.)
¥ Calories (CALS)ÑThis mode shows the approxi-
mate number of calories you have burned. (This
number includes both fat calories and carbohydrate
calories. See FAT BURNING on page 10.)
¥ ScanÑThis mode displays the calories, fat calories,
speed, time, and distance modes, for 5 seconds
each, in a repeating cycle.
HOW THE PACER PROGRAMS OPERATE
When you use a
pacer program,
two columns of
bars will appear in
the display. The
left column will
show a target
pace; the right
column will show
your actual
pedaling pace. The
target pace will change periodically during the
program; as the target pace changes, simply adjust
your pedaling pace to keep both columns at the same
height. Important: The target pace is a goal pace.
Your actual pace may be slower than the target
pace, especially during the first few months of
your exercise program. Be sure to exercise at a
pace that is comfortable for you.
The graphs at the bottom of the console show how the
target pace will change during the programs. Look at
the graphs for a moment (see the drawing at the left).
Each graph is divided into ten columns, with six bars in
each column. The columns represent two-minute time
periods, and the red bars show what the target pace
will be. In the first column of the Interval graph, for
example, there is one red bar. This shows that during
the first two minutes of the Interval program, the target
pace will be about 5 miles per hour (see the scale at
the left end of the graph). In the second column there
are five red bars. This shows that during the second
two-minute time period, the target pace will be about
25 miles per hour. Note: Because there are ten two-
minute periods, each program will last for twenty
minutes.
8
Target Pace Actual Pace

9
STEP-BY-STEP CONSOLE OPERATION
Before the console can be operated, two ÒAAÓ bat-
teries must be installed. (See assembly step 6 on
page 6 for installation instructions.) Follow the steps
below to operate the console.
Turn on the power
To turn on the
power, press
the on/reset
button or
simply begin
pedaling.
When the
power is turned on, the entire display will appear
for two seconds. The console will then be ready
for use. Note: If batteries were just installed, the
power will already be on.
Select one of the three pacer programs or the
manual mode
To select one of
the pacer
programs,
repeatedly
press the
program button.
The program
indicator will
show which
program you
have selected.
To select the
manual mode, press the program button until the
program indicator disappears. The programs will
be selected in the following order: program 1
(Interval), program 2 (Aerobic), program 3 (Fat
Burn), manual mode.
Begin your workout
If you selected
the manual
mode, go to
step 4. If you
selected one of
the pacer
programs, two
columns of bars
will appear in
the display. The
left column will
show one bar, showing that the target pace is
about 5 miles per hour. The right column will
show your actual pace. Adjust your pedaling pace
until only one bar appears in the right column. As
the program progresses, the target pace will
change periodically; as the target pace changes,
adjust your pedaling pace to keep both columns
at the same height. Important: The target pace
is a goal pace. Your actual pace may be slower
than the target pace, especially during the first
few months of your exercise program. Be sure
to exercise at a pace that is comfortable for
you.
Follow your progress with the monitor modes
To select the
scan mode,
repeatedly
press the mode
button until a
mode indicator
appears under
the word Òscan.Ó
A flashing mode
indicator will
show which
mode is
currently displayed.
To select the speed, time, distance, fat calories,
or calories mode for continuous display,
repeatedly press the mode button until the
desired mode indicator appears. (Make sure that
the scan mode is not selected.)
If desired, the display can be reset by pressing
the on/reset button.
Turn off the power
To turn off the power, simply wait for about
four minutes. If the pedals are not turned and
the console buttons are not pressed for four
minutes, the power will turn off automatically.
1
2
3
4
5
Program Indicator
Mode Indicators
Actual Pace
Target Pace

10
CONDITIONING GUIDELINES
The following general guidelines will help you to plan
your exercise program. Remember that proper nutri-
tion and adequate rest are essential for successful
results.
EXERCISE INTENSITY
Whether your goal is to burn fat or strengthen your
cardiovascular system, the key to achieving the
desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows recom-
mended heart rates for fat burning, maximum fat
burning, and cardiovascular (aerobic) exercise.
To find the proper heart rate for you, first find your age
near the top of the chart (ages are rounded off to the
nearest ten years). Next, look below your age and
find the three numbers in boxes. The three numbers
are your Òtraining zone.Ó The lowest number is the
recommended heart rate for fat burning; the middle
number is the recommended heart rate for maximum
fat burning; the highest number is the recommended
heart rate for aerobic exercise.
Fat Burning
To burn fat effectively, you must exercise at a rela-
tively low intensity level for a sustained period of time.
During the first few minutes of exercise, your body
uses easily accessible carbohydrate calories for
energy. Only after the first few minutes of exercise
does your body begin to use stored fat calories for
energy. If your goal is to burn fat, adjust the intensity
of your exercise until your heart rate is near the
lowest number in your training zone as you exercise.
For maximum fat burning, adjust the intensity of your
exercise until your heart rate is near the middle
number in your training zone as you exercise.
Aerobic Exercise
If your goal is to strengthen your cardiovascular
system, your exercise must be Òaerobic.Ó Aerobic
exercise is activity that requires large amounts of
oxygen for prolonged periods of time. This increases
the demand on the heart to pump blood to the
muscles, and on the lungs to oxygenate the blood.
For aerobic exercise, adjust the intensity of your
exercise until your heart rate is near the highest
number in your training zone.
HOW TO MEASURE YOUR HEART RATE
To measure your heart rate, first exercise for at least
four minutes. Then, stop exercising and place two
fingers on your
wrist as
shown. Take a
six-second
heartbeat
count, and
multiply the
result by 10 to
find your heart
rate. For
example,
if your six-
second heart-
beat count is 14, your heart rate is 140 beats per
minute. (A six-second count is used because your
heart rate will drop rapidly when you stop exercising.)
Adjust the intensity of your exercise until your heart
rate is at the desired level. You can adjust the inten-
sity of your exercise by changing your pedaling pace,
adjusting the pedaling resistance, or moving the
handlebars as you pedal.
WORKOUT GUIDELINES
Each workout should include the following three parts:
A warm-up, consisting of 5 to 10 minutes of stretch-
ing and light exercise. A proper warm-up increases
your body temperature, heart rate, and circulation in
preparation for strenuous exercise. (See
SUGGESTED STRETCHES on page 11.)
WARNING: Before beginning this or any exer-
cise program, consult your physician. This is
especially important for persons over the age
of 35 or persons with pre-existing health
problems.

11
SUGGESTED STRETCHES
The correct form for several basic stretches is shown in the
drawings below. Move slowly as you stretchÑnever bounce.
1. Toe Touch Stretch
Stand with your knees bent slightly and slowly bend forward
from your hips. Allow your back and shoulders to relax as you
reach down toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times. Stretches: Hamstrings,
back of knees, and back.
2. Hamstring Stretch
Sit with one leg extended. Bring the sole of the opposite foot
toward you and rest it against the inner thigh of your extended
leg. Reach toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times for each leg. Stretches:
Hamstrings, lower back, and groin.
3. Calf/Achilles Stretch
With one leg in front of the other, reach forward and place
your hands against a wall. Keep your back leg straight and
your back foot flat on the floor. Bend your front leg, lean for-
ward and move your hips toward the wall. Hold for 15 counts,
then relax. Repeat 3 times for each leg. To cause further
stretching of the achilles tendons, bend your back leg as well.
Stretches: Calves, achilles tendons, and ankles.
4. Quadriceps Stretch
With one hand against a wall for balance, reach back and
grasp one foot with your other hand. Bring your heel as close
to your buttocks as possible. Hold for 15 counts, then relax.
Repeat 3 times for each leg. Stretches: Quadriceps and hip
muscles.
5. Inner Thigh Stretch
Sit with the soles of your feet together and your knees out-
ward. Pull your feet toward your groin area as far as possible.
Hold for 15 counts, then relax. Repeat 3 times. Stretches:
Quadriceps and hip muscles.
1
2
3
4
5
Training zone exercise, consisting of 20 to 30
minutes of exercise with your heart rate in your
training zone.
A cool-down, with 5 to 10 minutes of stretching.
Thorough stretching helps to prevent problems caused
when you stop exercising suddenly. Stretching for
increased flexibility is also most effective after exercis-
ing. A proper cool-down should leave you feeling
relaxed and comfortably tired.
EXERCISE FREQUENCY
To maintain or improve your condition, plan three
workouts each week, with at least one day of rest
between workouts. After a few months of regular
exercise, you may complete up to five workouts each
week, if desired.
Remember, the key to success is make exercise a
regular and enjoyable part of your everyday life.

12
Inspect and tighten all parts of the PROFORM¨990S
regularly. The 990S can be cleaned with a soft, damp
cloth. To prevent damage to the console, keep liquids
away from the console and keep the
console out of direct sunlight.
BATTERY REPLACEMENT
If the console does not function properly, the batteries
should be replaced. To replace the batteries, refer to
assembly step 6 on page 6.
HANDLEBAR LUBRICATION
If a squeak is heard when the handlebars are moved,
a small amount of grease should be applied.
Turn the Resistance Knob (7) counterclockwise until
you can remove it. Remove the Star Washer (11).
Using pliers, grip the head of the Long Carriage Bolt
(13) and remove it. Apply a thin film of grease to both
sides of the Handlebar Housings (10). Reattach all
parts, making sure that they are in the positions
shown.
CRANK ADJUSTMENT
If the arms of the Crank (14) become loose, they
should be tightened in order to prevent excessive
wear. Loosen the crank nut on the left arm of the
Crank. Place the end of a standard screwdriver in one
of the slots in the slotted crank nut. Lightly tap the
screwdriver with a hammer to turn the slotted crank
nut counterclockwise until the arms are no longer
loose. Do not overtighten the slotted crank nut.
When the slotted crank nut is properly tightened,
tighten the crank nut.
HOW TO STORE THE PROFORM¨990S
When the PROFORM¨990S is not in use, it can be
folded for compact storage. Refer to the drawing
below. Loosen the Lock Knob (36) on the right side of
the frame. Slide the Handlebar Frame (2) into the
Frame (1) as far as it will go. Tighten the Lock Knob.
Store the PROFORM¨990S indoors, away from
moisture and dust.
MAINTENANCE AND STORAGE
36
2
1
13
7
11
Crank Nut
Slotted Crank Nut
14
Lubricate
Lubricate
10
10

13
NOTES

14
PART LISTÑModel No. 831.288300 R0497A
Key Part
No. Qty. No. Description
1 1 NSP Frame
2 1 NSP Seat Frame
3 1 134613 Idler Bracket
4 1 134717 Idler Wheel
5 1 134546 Right Handlebar
6 1 134545 Left Handlebar
7 1 134258 Resistance Knob
8 1 134274 Resistance Dial Assembly
9 1 132699 Belt
10 2 134376 Handlebar Housing
11 1 104345 Star Washer
12 2 134273 Friction Pad
13 1 134533 Long Carriage Bolt
14 1 134377 Crank
15 1 122898 Pulley
16* 1 110465 Crank Bearing Assembly
17 1 012150 M8 Nut
18 2 014041 Washer
19 1 135425 Axle Bushing
20 2 136121 Star Washer
21 2 133616 Seat Frame Endcap
22 1 134263 Flywheel
23 2 014132 M10 Flat Washer
24 1 134374 Left Side Shield
25 1 134375 Right Side Shield
26 9 135426 M4 x 8mm Screw
27 5 127597 Tree Fastener
28 1 134314 Flywheel Axle
29 1 132828 Console
30 1 134260 Left Pedal Strap
31 1 134259 Right Pedal Strap
32 1 013547 Idler Pivot Bolt
33 2 134267 Wheel Hub
Key Part
No. Qty. No. Description
34 2 134268 Wheel
35 2 134269 Wheel Bushing
36 1 134272 Lock Knob
37 3 012149 3/8Ó Nylon Locknut
38 4 012042 M8 Nylon Locknut
39 1 106106 Extension Spring
40 1 013225 M5 Screw
41 2 134534 Grip
42 2 134276 Stabilizer Endcap
43 4 133918 Handlebar Endcap
44 1 134277 Seat Frame Bushing
45 1 134278 Frame Bushing
46 2 137911 Seat Spacer
47 1 134367 Right Pedal w/Strap
48 1 134368 Left Pedal w/Strap
49 1 134312 Idler Spring
50 1 134602 Reed Switch Wire
51 1 128348 Push Nut
52 2 134366 M8 x 60mm Bolt
53 1 134535 Seat
54 1 134536 Backrest
55 4 121560 Seat Screw
56 4 013468 1/4Ó x 5/8Ó Screw
57 2 134316 Wheel Screw
58 1 134539 Seat Bracket
59 2 137912 Seat Bracket Bolt
60 4 014063 1/4Ó Flat Washer
61 1 134317 Magnet Bracket
62 4 120001 1/4Ó x 9/16Ó Screw
63 1 134548 Backrest Cover
64 1 119222 Flywheel Spacer
# 1 045004 Tool Set
# 1 134550 UserÕs Manual
Note: Ò*Ó Includes all parts shown in box. Ò#Ó indicates a non-illustrated part. Specifications are subject to change
without notice. See the back cover of this manual for information about ordering replacement parts.

27
27
24
25
31
47
14
15
8
61
39 29
50
42
42
1
26
30
48 14
26
38
18
64
28 22
52
26
45
26
36
38
18 49
3223 23
37
3
4
51
40
52
38
26
44
6
41
5
10
12
11
7
10
12
13
43
43
9
57
33
34 35
2
35
34 33 57
43
54
59
37
56
56
58
62
62
53
55
55
63
17
26
26
46
60
60
21
20
20
41
43
16*
19
EXPLODED DRAWINGÑModel No. 831.288300 R0497A
15

Part No. 134550 G00963-C R0497A Printed in Taiwan © 1997 Sears, Roebuck and Co.
The model number and serial number of your PROFORM¨990S
are listed on a decal attached to the frame. See the front cover of
this manual to find the location of the decal.
All replacement parts are available for immediate purchase or
special order when you visit your nearest SEARS Service Center.
To request service or to order parts by telephone, call the toll-free
numbers listed at the left.
When requesting help or service, or ordering parts, please be
prepared to provide the following information:
¥ The NAME OF THE PRODUCT (PROFORM¨990S)
¥ The MODEL NUMBER OF THE PRODUCT (831.288300)
¥ The PART NUMBER OF THE PART (see page 14)
¥ The DESCRIPTION OF THE PART (see page 14)
Model No. 831.288300
QUESTIONS?
If you find that:
¥ you need help assembling or
operating the PROFORM¨990S
¥ a part is missing
¥ or you need to schedule repair
service
call our toll-free HELPLINE
1-800-736-6879
MondayÐSaturday, 7 amÐ7 pm
Central Time (excluding holidays)
REPLACEMENT
PARTS
If parts become worn and need to
be replaced, call the following
toll-free number
1-800-FON-PART
(1-800-366-7278)