PROEL PLLEDMLBG User manual

MANUALE UTENTE –USER’S MANUAL
Rev. 11/2006
PLLEDMLBG
LED MOVING HEAD

3
INTRODUCTION................................................................................ 12
SPECIFICATION................................................................................ 12
SAFETY COMMAND......................................................................... 13
ACCESSORIES INCLUDED.............................................................. 13
FIXING INSTRUCTION...................................................................... 13
CONTROL TUNNEL.......................................................................... 17
APPENDIX 1: adapting system from 5 core to 3 core plug.................. 18
APPENDIX 2: function settings........................................................... 18
APPENDIX 3: Setting Of All Functions................................................ 19

12

INTRODUCTION
Thank you for selecting our products named LED Move Head Light ,
In the sake of your safety and better use of this product, please read
this user’s manual carefully and note the rules strictly before you
use this product:
It adopts advanced design and processing technics and has trim
appearance. It use high quality glass and RGBsystem and DMX512,
that make it can create unlimited color. It can work according to the
program solidified itself. It use LEDlamp, suitable for outdoor view
of supermarket and disco, theme park, historic sits, castles, hotels,
skyscrapers, holiday, village and stage background.
SPECIFICATION
Voltage: AC 220V/50Hzor AC120V/60Hz
Power:50 W
Lamp:LED(1W×36 LED)
Number of channels:10 Channel
Control model:DMX512 Single/controller/main-follower
Color effected:RGB –16 million colors
Angle of beam:horizontal 540evertical 270 e
Size:300×280×350 mm
Net weight:6Kgs
Others:Function of inspecting itself and working
according to the program.

13
SAFETY COMMAND
130
High Temperature Lamp
Avoid Current-Passing
•Repaired by regular maintenance only.
•Please disconnect power supply before equip parts or moving
•Please choose correct voltage and lamp size
•Do not touch the lamp with your hand directly.
•Make sure that it is 1m between light and object.
•Don’t see the lamp directly when it works.
ACCESSORIES INCLUDED
•LED Move Head Light
•XLR control line (pc.1)
•Omega Holders (pcs.2)
FIXING INSTRUCTION
This product can works outdoor or indoor. Air temperature must be
under 35°C.
Please read this user’s manual carefully before fixing, operation or
maintain.
Confirm if the product has been shattered during shipment.
Confirm that the power supply is disconnected and the lamp is cool
before you change lamp.
the side has bleb is up , do not touch the lamp with key and digital
display.
Put the light at breezy and confirm fans is ok .
Put the yellow / green 2 color wire on the ground

14
LED Move Head Lightuse 6A / 250V fuse.
RIGGING
DANGER TO LIFE: Please consider the respective national norms
during the installation. The installation must only be carried out by
an authorized dealer.
The installation must always be secured with a secondary safety
attachment safety rope). This secondary safety attachment must be
constructed in a way that no part of the installation can fall down if the
main attachment fails. A safety rope which already hold the strain of a
crash or which is defective must not be used again.
1.Omega-holders
2.Clamps (optional)
3.Screws
4.Safety-rope
Unscrews 4 screws (3) on the base. Screw one clamp each via a M12
screw and nut onto the Omega-holders. Insert the quick-lock
fasteners of the first Omega-holder into the respective holes on the
bottom ofthe device. Tighten the quick-lock fasteners fully clockwise.
Install the second Omega-holder.
Use 2 appropriate clamps to rig the fixture on the truss; make sure
that the device is fixed properly; make sure that the structure (truss)
to which you are attaching the fixture is secure.

15
1.Omega Holders
2.Aliscaf
3.Screws
4.Safety cable

16
OPERATION INSTRUCTIONS
The LEDmoving head uses LED digital display method to control
the channel setting.
The LEDmoving head adopts international standard DMX-512
signal, multiple lights can be controlled by the controller due to use
the channel setting (the details are listed in Appendix 2
Use the XLR-XLR cable from the signal output port of the consol to
connect the signal input port of the first light, connect the signal
output port of the first light with the signal input port of the second
light, and so on, until all lights are connected.
For all installation, having long
signal cables or in the presence of
electrical noise, for example a
discotheque, it is recommended
practice to use a DMX terminator:
this assist in preventing corruption
of the digital control signal by
external noise. The DMX terminator
is simply an XLR connector with a 120Ω(Ohm) resistor connected
across pins 2 and 3, which is then plugged into the DIGITAL THRU
socket on the last projector in the chain.
The LEDmoving head uses core XLR outlet (plug). A transfer line

17
from 5 core to 3 core will be needed if the controller you use is 5
core outlet (plug). (Please refer to Appendix 1).
When power is on, the equipment will undertake self-examination,
and can undertake operation after the self-examination is finished.
Please don’t shake the equipment when it is in operation.
CONTROL TUNNEL
LED Move Head Lightadopts DMX512 , is has 10 tunnel as
following:
Channel
DMX value
Control
1
STOBE
0 -255
Slow –fast
2
RED
0 -255
0 –100%
3
GREEN
0 -255
0 –100%
4
BLUE
0 -255
0 –100%
5
AUTO
0 –254
255
255 Preset color chases
Continue color scrolling
6
SPEED
0 -255
Adjust color scrolling speed
7
PAN
0 –255
0 –540°
8
TILT
0 –255
0 –270°
9
PAN fine
0 –255
16 bit
10
TILT fine
0 –255
16 bit

18
APPENDIX 1: adapting system from 5 core to 3 core plug
Pin 1:GND(SCREEN)
Pin 2:Signal(+)
Pin 3:Signal(-)
3Core Plug
Û
Pin 1:GND(SCREEN)
Pin 2:Signal(+)
Pin 3:Signal(-)
Pin 1:GND(SCREEN)
Pin 2:Signal(+)
Pin 3:Signal(-)
Pin 1:GND(SCREEN)
Pin 2:Signal(+)
Pin 3:Signal(-)
Pin 4:N/C
Pin 5:N/C
Pin 1:GND(SCREEN)
Pin 2:Signal(+)
Pin 3:Signal(-)
Pin 1:GND(SCREEN)
Pin 2:Signal(+)
Pin 3:Signal(-)
Pin 4:N/C
Pin 5:N/C
APPENDIX 2: function settings
UP key
DOWN key
Mmeans menuÈthe menus Enter, it will be used to
confirm every function
Exit
DISPLAYÖÖ
ADDR
Setting the No. of starting channels of the lightÄ1—
512ChannelsÅ
TEST
Setting the self-examination for all channels
XDIR
Setting +/-direction for X Axis (OBVSis + ; REVSis -)
YDIR
Setting +/-direction for Y Axis (OBVSis +; REVSis -)

19
CHSL
CHSL is defined as Channels Switch which total are two
option include ON & OFF. When it is in “ON”position, the
light is maximum channels. When it shows “OFF”, the
light is the last two channels. 16 Bit is useless.
PERF
PERF is defined as light working speed adjustment with
MAX and NOMA. Which MAX means the fast speed and
NOMA means 80% of MAX speed.
RSET
Reset function.
TIME
Indicates the work time of the projector.
DISP
AOFF: ON means no display. AOFF: OFF means display.
NDSP
OFF:display is in normal position. ON: display is
inverted.
APPENDIX 3: Setting Of All Functions
TIME:
DISP:
DISP
OFF\ON
DISP
OFF\ON
TIME
LAMP
TTME
TIME

PROEL S.p.A.
(World Headquarters –Factory)
Via alla Ruenia 37/43
64027 Sant’Omero (TE) –Italy
Tel. [phone]
Fax. [phone]
e-mail: [e-mail]
www.proelgroup.com