Promeba PA-20 User manual

Body Splint
PA-20/ PA-168
INSTRUCTIONS MANUAL

1. Manual Introduction
What referred to here is a part of the manual. Please read the manual carefully, because it provides
important information about safety use and maintenance procedures of the product. The
description and pictures in the manual are not binding, PROMEBA has the right to modify any
information in this manual, with the purpose of renewing the quality of the product in the manual.
The diagrams and pictures in the manual are just examples, they may also be further modified.
2. Application Scope
This product is for the emergency rescue of patients with spine, ribs, or cervical injuries.
3. Product Features
1. This product use a splint which encompasses the back of the patient to immobilize the patient.
2. The belts on the splint are with three colors, they can be used to fix the patient quickly. The
splint is also be equipped with nylon buckles and safety belts.
3. This product is easy to carry and easy to clean.
4. It can be used together with cervical collar.
4. Technical Parameters
Model
PA-20
Unfold size (L×W)
82×71cm
Model
PA-168
Unfold size (L×W)
62x20 cm
5. Usage
1. Unfold the Body Splint (see Figure 1)

2. Check the patient’s injury. Put the splint at the back of the patient when the patient is sitting.
Close up the fixing pieces for body as shown in figure 2 and connect them through fixing belts and
buckles. Fold and fix the rest belts as shown in the circle in figure 2. If the patient is injured in
cervical, first fix the patient with a cervical collar, then wrap up patient’s head by the fixing
pieces(use together with cushion if needed, put the cushion at the back of the patient before
use),fix patient’s forehead and chin by fixing belts (as shown in figure 3).
Figure 2 Figure 3
3. After use, clean, disinfect and dry the splint, fold it according to the way before folding, then
put into storage.
6. Cautions
1. Injury state of the patient must be confirmed before using the splint. The operators should be
qualified and be familiar with the operation process.
2. Make sure the patient is well fixed before transport.

7. Maintenance
1. Always be kept clean (including disinfection);
2. Always check if the belts are worn, if there are, change it in time.
8. Storage
1. Store this stretcher in the place of damp proof and non-corrosion;
2. When in storage and transportation, stack it as shown in the packing.
9. Transport
1. Be transported by air, sea and land.
2. The stretcher may be carried by manual.
10. Packing and Accessories
No.
Item Name
Quantity
1
Pillow
1
2
Belt for forehead and chin
2