Promeba PC-618 User manual

USER GUIDE
STRETCHER // PC-618 & PC-658
Review 12/18

USER MANUAL // STRETCHER PC-618 & PC-658
Review 12/18
3
01 INTRODUCTION
01.1 Using this manual 5
01.2 Technical data sheet 6
02 INSTALATION
02.1 Transporting and unpacking 11
03 OPERATING
03.1 Elements 13
03.2 Commands 18
03.3 Loading and unloading operation 19
03.4 Pushrod 21
04 MOUNTING AND COMPONENTS
04.1.1 General view STRETCHER PC-618 y PC-618/H 22
04.1.2 General view STRETCHER PC-658 y PC-658/H 23
04.2.1 Bunk set PC-618 y PC-618/H 24
04.2.2 Bunk set PC-658 y PC-658/H 26
04.3 Backrest set PC-618 // PC-618/H y PC-658 // PC-658/H 30
04.4.1 Set guide rods PC-618 y PC-618/H 32
04.4.2 Set guide rods PC-658 y PC-658/H 34
04.5 Telescopic hand grips PC-618 // PC-618/H y PC-658 // PC-658/H 36
04.6 Regulator backup set PC-618 y PC-618/H 38
04.7 Folding handrails set PC-618 y PC-618/H 40
04.8 Folding handrails and folding railings set PC-658 y PC-658/H 42
04.9 Folding pole set PC-618 // PC-618/H y PC-658 // PC-658/H 44
04.10.1 Standard rotating set with brake PC-618 y PC-658 46
04.10.2 Standard rotating set with brake PC-618/H y PC-658/H 48
04.11.1 Inverted rotating leg set with brake PC-618 y PC-658 50
04.11.2 Inverted rotating leg set with brake PC-618/H y PC-658/H 52
05 GENERAL MAINTENANCE 54
06 LEGAL NOTICES 55
07 PRODUCT WARRANTY 56
INDEX
MODEL PC-618
STANDARD CONFIGURATION
MODEL PC-618/H
HIGH CONFIGURATION
MODEL PC-658
STANDARD CONFIGURATION
MODEL PC-658/H
HIGH CONFIGURATION

USER MANUAL // STRETCHER PC-618 & PC-658
Review 12/18
5
01 INTRODUCTION
01.1 Using this manual
This manual provides using and maintenance instruc-
tions of the product, as well as the way of xing minor
faults that could appear.
It is recommended before the operation of the product
to read carefully this manual in order to avoid damages
caused by a misuse.
Do not lose this document, it should be accessible to
any doubt that could appear by medical personnel.
Remember that a good use and maintenance are ne-
cessary for the proper operation of the product.
Each product incorporates an identication sticker with
the serial number and the model. Keep these numbers
so that they can be indicated to the dealer if necessary.

USER MANUAL // STRETCHER PC-618 & PC-658
Review 12/18
6
1920
580
880
800
01 INTRODUCTION
01.2 Technical data sheet
MEASURES AND FEATURES // PC-618
LENGHT 1920 mm INTERMEDIATE STOP 500-580 mm
WIDTH 580 mm FOLDED HEIGHT 300-330 mm
HEIGHT 800-880 mm MAX. LOAD 250 Kg
WEIGHT 46 Kg
300
330

USER MANUAL // STRETCHER PC-618 & PC-658
Review 12/18
7
01.2 Technical data sheet
MEASURES AND FEATURES // PC-618/H
LENGHT 1920 mm INTERMEDIATE STOP 600-680 mm
WIDTH 580 mm FOLDED HEIGHT 300-330 mm
HEIGHT 900-980 mm MAX. LOAD 250 Kg
WEIGHT 47 Kg
01 INTRODUCTION
980
578
900
1920
300
330

USER MANUAL // STRETCHER PC-618 & PC-658
Review 12/18
8
1920
580
880
800
01 INTRODUCTION
01.2 Technical data sheet
MEASURES AND FEATURES // PC-658
LENGHT 1920 mm INTERMEDIATE STOP 500-580 mm
WIDTH 580 mm FOLDED HEIGHT 300-330 mm
HEIGHT 800-880 mm MAX. LOAD 250 Kg
WEIGHT 50 Kg
300
330

USER MANUAL // STRETCHER PC-618 & PC-658
Review 12/18
9
01.2 Technical data sheet
MEASURES AND FEATURES // PC-658/H
LENGHT 1920 mm INTERMEDIATE STOP 600-680 mm
WIDTH 580 mm FOLDED HEIGHT 300-330 mm
HEIGHT 900-980 mm MAX. LOAD 250 Kg
WEIGHT 51 Kg
01 INTRODUCTION
980
578
900
1920
300
330

USER MANUAL // STRETCHER PC-618 & PC-658
Review 12/18
11
02 INSTALATION
02.1 Transporting and unpacking
First remove the packaging carefully to prevent dama-
ge to the exterior of the stretcher.
1. Transporting
· Always x the load, if piling up is necessary always
follow the scheme shown.
· Transport the leveled load and following all precepts
and rules for the transport of loads.
2. Unpacking
· Place the box on a at, stable surface and open the
seal being careful not to damage the inside.
· Remove the stretcher from the inside of the load as
shown in the scheme below.
Each stretcher has been minutely examined when lea-
ving the factory. To ensure that it has not been dete-
riorated during transport, please carefully inspect the
outside and the inside, and in case of nding any im-
perfection, immediately contact the installer.
For an optimum operation, the stretcher must be leve-
led.
PACKING UNIT
RRESPECT THE PACKING’S TRANSPORT POSITION
PRODUCT’S UNPACKING
ALWAYS USE A FLAT BASE SUPPORT

USER MANUAL // STRETCHER PC-618 & PC-658
Review 12/18
13
03 OPERATING
03.1 Elements PC-618 y PC-618/H
1. Folding handrails
2. Belts with front push-button
3. Rear leg operating lever
4. Front leg operating lever
5. Third anchor point
6. Rear rotating leg brake
7. Front rotating leg brake
9. Front leg holding position operating lever
10. Telescopic handles
11. Folding pole
12. Adjustable brackrest
1
2
3
4
5
6
7
8
9
10
11

USER MANUAL // STRETCHER PC-618 & PC-658
Review 12/18
15
03 OPERATING
03.1 Elements PC-658 y PC-658/H
1. Folding handrails and folding railings
2. Belts with front push-buttonr
3. Legs system action by rods
4. Rear leg operating lever
5. Front leg operating lever
6. Third anchor point
7. Rear rotating leg brake
8. Front rotating leg brake
9. Front leg holding position operating lever
10. Telescopic handles
11. Folding pole
12. Adjustable brackrest assisted by gas spring
1
2
4
5
6
7
8
9
10
11
12
3

USER MANUAL // STRETCHER PC-618 & PC-658
Review 12/18
16
03.1 Elements PC-618 // PC-618/H & PC-658 // PC-658/H
03 OPERATING
11 8 10
12

USER MANUAL // STRETCHER PC-618 & PC-658
Review 12/18
17
1
03 OPERATING
13 3
03.1 Elements PC-618 & PC-618/H
03.1 Elements PC-658 & PC-658/H
13
1

USER MANUAL // STRETCHER PC-618 & PC-658
Review 12/18
18
03 OPERATING
03.2 Commands PC-618 & PC-658
01. REAR LEGS UNLOCKING LEVER
Green, located on the stretcher’s left side. The legs of the
rear side will unlock by operating the lever in order to place
the stretcher in loading and unloading position.
02. FRONT LEGS UNLOCKING LEVER
Red, located on the stretcher’s right side. The legs of the
front side will unlock by operating it in order to place the
stretcher in loading and unloading position.
03. HOLDING POSITION LEVER
Red, located on the front right side. It allows a second posi-
tion which facilitates the loading of the patient.
01 02 03
01
02
03

USER MANUAL // STRETCHER PC-618 & PC-658
Review 12/18
19
03 OPERATING
03.3 Loading and unloading operation
LOADING
· Open the loading ramp of the bench/rail (A)
· Place the stretcher head-on in relation to the loading axle of the bench (A)
· Approach the stretcher until the front wheels have contact with the loading ramp (B)
· Operate the right lever (RED) to unlock the front wheels (C)
· Decisively push to slide the stretcher into the ambulance (D)
· As the rear leg approaches, press the left lever (GREEN) to release the legs (E)
· Keep pushing until the stretcher is fully loaded (E)
· Pay attention to the third anchor point, you may heard a CLICK (in case of being installed)
· Close the loading ramp
UNLOADING
· Open the loading ramp of the bench/rail
· Release the stretcher’s closure by operating the lever (in case of being installed)
· Pull the stretcher. It will slide outward, hold it with the hands
· Fold the loading ramp
A B
C D
E F