PROPOINT Pistol-Grip Grease Gun User manual

V1.0 8886434
Please read and understand all instructions before use. Retain this manual for future reference.
GREASE GUN

PISTOL-GRIP

8886434 Pistol-Grip Grease Gun V1.0
2 For technical questions call 1-800-665-8685
SPECIFICATIONS
Max. Operating Pressure 6,000 PSI
Output 0.033 oz/stroke
Capacity
14 oz
Hose/Pipe Type Flexible
Hose/Pipe Length 12 in.
Tube Colour Black
Tube Material Steel
Handle Style Pistol-Grip
Cartridge Loading Yes
Suction Fill Yes
Filler Pump Loading Yes
Bulk Loading Yes
HAZARD DEFINITIONS
Please familiarize yourself with the hazard notices found in this manual.
A notice is an alert that there is a possibility of property damage, injury
or death if certain instructions are not followed.
DANGER! This notice indicates an immediate and specific hazard that
will result in severe personal injury or death if the proper
precautions are not taken.
WARNING! This notice indicates a specific hazard or unsafe practice
that could result in severe personal injury or death if the
proper precautions are not taken.
CAUTION! This notice indicates a potentially hazardous situation that
may result in minor or moderate injury if proper practices are
not taken.
NOTICE! This notice indicates that a specific hazard or unsafe
practice will result in equipment or property damage, but
not personal injury.

V1.0 Pistol-Grip Grease Gun 8886434
Visit www.princessauto.com for more information 3
INTRODUCTION
The Pistol-Grip Grease Gun is ideal for farm, do-it-yourself and
automotive applications. The 12 in. flexible hose can access hard to
reach areas.
SAFETY
WARNING! Read and understand all instructions before using this
tool. The operator must follow basic precautions to reduce the
risk of personal injury and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or
inspection and maintenance instructions.
WORK AREA
1. Operate in a safe work environment. Keep your work area clean,
well-lit and free of distractions. Place lights so you are not working
in a shadow.
2. Keep anyone not wearing the appropriate safety equipment away
from the work area.
3. Store tools properly in a safe and dry location. Keep tools out of
the reach of children.
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the
Canadian Standards Association (CSA) or American National
Standards Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1. Always wear impact safety goggles that provide front and side
protection for the eyes. Eye protection equipment should comply
with CSA Z94.3-07 or ANSI Z87.1 standards based on the type of
work performed.
2. Wear gloves that provide protection based on the work materials or
to reduce the effects of tool vibration.
3. Wear protective clothing designed for the work environment
and tool.
4. Non-skid footwear is recommended to maintain footing and
balance in the work environment.

8886434 Pistol-Grip Grease Gun V1.0
4 For technical questions call 1-800-665-8685
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid
personal injury or damage to the tool.
1. Do not operate any tool when tired or under the influence of drugs,
alcohol or medications.
2. Avoid wearing clothes or jewelry that can become entangled with
the moving parts of a tool. Keep long hair covered or bound.
3. Do not overreach when operating the tool. Proper footing and
balance enables better control in unexpected situations.
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to the tool safety rules.
If you use this tool unsafely or incorrectly, you can suffer serious
personal injury.
1. Use the correct tool for the job. This tool was designed for a
specific function. Do not modify or alter this tool or use it for an
unintended purpose.
2. Do not use the tool if any parts are damaged, broken or misplaced.
Repair or replace the parts.
INJECTION INJURY
DANGER! Seek immediate, professional medical treatment if grease
penetrates your skin. It may feel like a pricking or sting. Do not wait
for the appearance of symptoms. A toxic reaction can occur from
the exposure. Delay in treatment can lead to amputation or death.
Inform the medical staff that you have a grease penetration injury as
soon as you arrive at the medical facility. The severity of the symptoms
will depend on the type of grease injected. Bring the Safety Data Sheet
for the grease with you to the medical facility if possible.
INJECTION PRECAUTIONS
Grease can penetrate the skin at 100 PSI pressure. Grease escaping
under pressure from the tool has sufficient force to penetrate your clothing
and skin. Follow the precautions below to avoid an injection injury.
1. Always check for leaks wearing a face shield, safety goggles,
rubberized gloves and protective clothes.
2. Release all pressure from the system before you inspect it.

V1.0 Pistol-Grip Grease Gun 8886434
Visit www.princessauto.com for more information 5
3. Do not use your hands to detect a fluid leak. Use a large piece of
wood, cardboard or paper and watch for discolouration.
4. Replace damaged parts with identical manufacturer's components
to ensure it is rated to handle the pressure.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace
the missing part before operating. Failure to do so could result in
a malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect for
damage. Make sure that all items in the contents are included.
Contents: • Pistol-Grip Grease Gun • Flexible Pipe • 4-Jaw Coupler
IDENTIFICATION KEY
A Flexible Hose
B Head Unit
C Coupler
D End Cap
E Bulk Loader/Air Release Valve
F Pressure/Volume Lever
G Handle
H Grip
I Barrel
J Plunger Rod Handle
ASSEMBLY & INSTALLATION
CARTRIDGE LOADING
1. Unscrew the grease gun head (B) from the barrel counter-clockwise.
2. Pull back the plunger rod handle (J) all the way.
3. Remove the plastic cap from the open end of the grease cartridge
and fully insert it into the empty barrel (I). Make sure the rim of the
cartridge is seated on the rim of the barrel.
4. Remove the metal pull tab seal from the grease cartridge.
Fig. 1