PT W2262 User manual

WARNING
It is the owner and/or operators’ responsibility to study all WARNINGS, operating,
and maintenance instructions contained on the product label and instruction
manual prior to operation of this light. The owner/operator shall retain product
instructions for future reference.
The owner and/or operator are responsible for maintenance, maintaining all decals
or warning labels and while in use, maintaining the unit in good working order. If the
owner and/or operator are not fluent in English, the product warnings and
instructions shall be read and discussed with the operators’ native language by the
purchaser/owner or his designee. Make sure that the operator comprehends its
contents. Safety information shall be emphasized and understood prior to usage.
The service jack shall be inspected per the operating instructions.
Protect yourself and others by observing all safety information.
Failure to comply with instructions could result in personal injury and/or property
damage!
If you encounter any problems or difficulties, please contact our customer service
department at: 1-800-426-1262 between 6:30 a.m. and 4:30 p.m. Pacific time.
20 FT DROP LIGHT
OWNERS MANUAL
Stock Number W2262
On occasion, after printing of our literature is completed, our manufacturers may make changes and/or
modifications to merchandise which will not be reflected in this manual. Although we strive to maintain complete
and accurate information, it is possible in some instances, that the product may differ slightly from printed
specifications. Illustrations are intended for reference only. Actual merchandise may vary. Wilmar is not
responsible for typographical errors.
Please read these instructions carefully and retain them for future use.
1 YEAR LIMITED WARRANTY
PERFORMANCE TOOL® extends only the following warranties, and only to original
retail purchasers. These warranties give specific legal rights. Except where prohibited
by local law, the law of the State of Washington governs all warranties and all
exclusions and limitations of warranties and remedies. There may be other rights
which vary from state to state.
PERFORMANCE TOOL® warrants the product to be free from defects in materials and
workmanship under normal use and service. A defective product may be returned for
a free replacement within 90 days from the date of purchase, provided that product is
returned to place of purchase immediately after discovery of defect. After 90 days and
up to one year from date of purchase, PERFORMANCE TOOL® will replace at no
charge any parts which our examination shall disclose to be defective and under
warranty. These warranties shall be valid only when a sales receipt showing the date of
purchase accompanies the defective product or defective part (s) being returned. For
part (s) after 90 days, please remit your request, postage prepaid to:
PERFORMANCE TOOL, P.O. Box 88259 Tukwila, WA 98138
These warranties exclude blades, bits, punches, dies, bulbs, fuses, hoses, and other
consumables which must be replaced under normal use and service. These
warranties shall not apply to any product or part which is used for a purpose for
which it is not designed, or which has been repaired or altered in any way so as to
affect adversely its performance or reliability, nor shall these warranties apply to any
product or part which has been subject to misuse, neglect, accident or wear and tear
incident to normal use and service.
PERFORMANCE TOOL® does not authorize any other person to make any warranty
or to assume any liability in connection with its products.
Except for warranties of title and the limited express warranties set forth above,
PERFORMANCE TOOL® makes no express or implied warranties of any kind with
respect to its products. In particular, PERFORMANCE TOOL® makes no implied
warranty of merchantability and no implied warranty of fitness for any particular
purpose, except that for goods purchased primarily for personal, family or household
use and not for commercial or business use, PERFORMANCE TOOL® makes an
implied warranty of merchantability (and, if otherwise applicable, an implied warranty
of fitness for a particular purpose), but only for the particular qualities or
characteristics, and for the duration, expressly warranted above.
The laws on limitation of implied warranties may differ from state to state, so the
above limitations may not apply in all cases.
PERFORMANCE TOOL® shall not be liable for consequential, incidental or special
damages resulting from or in any manner related to any product, or to the design, use,
or any inability to use the product. The sole and exclusive remedy for a defective
product or part shall be the repair, or replacement thereof as provided above. The
laws on limitation of remedies or on consequential, incidental or special damages may
vary from state to state, so the above limitations may not apply in all cases.
© Copyright 2014 WILMAR CORPORATION, P.O. Box 88259 Tukwila, WA 98138

After opening the carton, unpack your new product and related parts & accessories.
Please inspect it carefully for any damage that may have occurred during transit. Please
check it against the photograph on carton. If any parts are missing, please call customer
service at 1-800-426-1262 between 6 a.m. and 5 p.m. Pacic time.
WARNING! DO NOT operate this product if damaged during shipment, handling
or misuse. Do not operate the product until the parts have been replaced or the fault
rectied. Failure to do so may result in serious personal injury or property damage. All
damaged parts must be repaired or replaced as needed prior to operating this product.
Check to see that all nuts, bolts and ttings are secure before putting this product into
service. If you have any questions, or require assistance with damaged or missing parts,
please contact our factory customer service department at: 1-800-426-1262.
Please have the serial number, model number, and date of purchase available for
reference when calling.
DANGER: Do not use product near gas, combustible or explosive materials.
1. Always use common sense and pay particular attention to all the DANGER,
WARNING, CAUTION and NOTICE statements of this manual. The safety instructions
provided are not intended to cover all possible conditions and practices that may occur
when operating, maintaining and cleaning power tools.
2. Observe work area conditions. Do not use machines or power tools in damp or
wet locations. Don’t expose to rain or snow. Keep work area well lighted. Do not use
electrically powered tools in the presence of ammable gases or liquids. Do not bring
combustible materials near the tools. Power tools create sparks, which may ignite the
dust or fumes. Do not immerse tool in liquids. Keep work area clean, well ventilated and
well lit. Cluttered work areas invite accidents.
3. Use personal protective equipment. Wear ANSI approved safety goggles. Protective
equipment such as dusk mask, non-skid safety shoes, hard hat, heavy duty work gloves
or hearing protection used for appropriate conditions will reduce personal injuries.
4. Keep bystanders, children and visitors away while operating this product.
Distractions can cause you to lose control.
5. Stay alert. Watch what you are doing, and use common sense when operating
this tool. Do not use this product while tired or under the inuence of drugs, alcohol, or
medication. A moment of inattention while operating this product may result in serious
personal injury. Keep proper footing and balance at all times. Do not reach over or across
running machines, hoses, cords, etc.
6. This product is not intended for use as a power source. Do not exceed electrical
rating of this product.
7. Work Safe. Operate tool a safe distance from yourself and others in the work area.
Keep proper footing and balance at all times. Do not overreach, especially on ladders.
Be certain ladders being used are sturdy, stable, on a rm surface and erected as safe
working angles. Do not reach over or across running machines, hoses, cords, etc.
8. Inspect tool before every use; do not use if parts are loose or damaged.
9. Do not alter, splice, repair or modify this product in any way.
10. Power tool plugs must match the outlet. Never modify the plug in any way. Do
not use any adapter plugs with earthed (grounded) power tools. Unmodied plugs and
matching outlets will reduce risk of electric shock.
11. People with pacemakers should consult their physician(s) before use.
Electromagnetic elds in close proximity to heart pacemaker could cause pacemaker
interference or pacemaker failure. In addition, people with pacemakers should:
• Avoid operating alone.
• Properly maintain and inspect to avoid electrical shock.
• Any power cord must be properly grounded. Ground Fault Circuit Interrupter
(GFCI) should also be implemented – it prevents sustained electrical shock.
12. Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
13. Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
14. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock. Always grasp plug, not cord, when
unplugging from an outlet.
15. When operating a power tool outdoors, use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
16. Use power tool ONLY on adequately rated circuits to avoid overheating of
electrical systems.
17. Prevent accidental starting. Ensure switch is in the “OFF” position before
connecting to power source and/or battery pack, picking up or carrying the tool.
Carrying power tools with your nger on the switch or energizing power tools that
have the switch “ON” invites accidents.
18. Do not use the power tool if the switch does not turn it on and off. Any power tool
that cannot be controlled with the switch is dangerous and must be repaired.
19. Maintain labels and nameplates on the tool. These carry important safety
information. If unreadable or missing, contact Performance Tool® for a replacement.
20. Disconnect the plug from the power source before any adjustments or changing
bulbs. Such preventive safety measures reduce the risk of starting the power tool
accidentally. Unplug work light and any connected equipment when not in use.