Pyle Pro PDWM 2250 User manual

19" Rack Mount Dual VHF wireless
Rechargeable Hand-Held Microphone System
Function
Front Panel
(1) (5)LCD:when power is on, it becomes green which can
show FREQ (receiving frequency ofthe device);OO-30 (rate
ofsound volume).LineAl8 (channel
Aor 8); T (radio fre-
quency indicator) which shows the level ofthe signal when
the microphone is on."
»))) "(acoustical frequency level in-
dicator) it waves with the sound of microphone, from
Od8-35d8 to "iiiiiii"
(2) (6)press button(SET)to set the functions of the device;
forthe volume, press the button, the code number(OO-32)
flashes on the LCD, push the
"L,"or"\l"button to choose
the suitable value ofthe sound, then push the button again,
and the value on the LCD stops flashing,setting is completed.
(3) (7)Volume control key"-"; to be used togetherwith the set
button to
decrease the sound, less value lower sound.
(4) (8)Volume control key "+"; to
be used togetherwith the
set button to increase the sound, biggervalue, lowersound.
(9)power button press this button, the electric powerwill
be
on and the receiver stats to work and the display panel lights.
(1 O)lndicator ofcharging: put the rechargeable battery into
the battery case,the indicatoris on, itwill be dark afterfull
charging.
PDWM 2250 User Manual
Part name (Hand-held microphone)
(1 )headnet (2)indicator
(3)power switch (4 )power case
(5)8attery (6)8attery cover
Operation
1.Please take the following working flow diagram for
reference on using this machine-connect the mix
out of receiver with mic input on the amplifier.
2.Power 11 OV, switch the power, set the volume of
your sound equipment.
3. Adjust the volume in right sound, make MIC1 and
MIC2 harmony, which will make you enjoying the
sound well.
4.Please plug out the power if you will not use the
machine long time.
www.pyleaudio.com ~~LE®
19" Rack Mount Dual VHF wireless
Rechargeable Hand-Held Microphone System
Function
Front Panel
(1) (5)LCD:when power is on, it becomes green which can
show FREQ (receiving frequency ofthe device);OO-30 (rate
ofsound volume).LineAl8 (channel
Aor 8); T (radio fre-
quency indicator) which shows the level ofthe signal when
the microphone is on."
»))) "(acoustical frequency level in-
dicator) it waves with the sound of microphone, from
Od8-35d8 to "iiiiiii"
(2) (6)press button(SET)to set the functions of the device;
forthe volume, press the button, the code number(OO-32)
flashes on the LCD, push the
"L,"or"\l"button to choose
the suitable value ofthe sound, then push the button again,
and the value on the LCD stops flashing,setting is completed.
(3) (7)Volume control key"-"; to be used togetherwith the set
button to
decrease the sound, less value lower sound.
(4) (8)Volume control key "+"; to
be used togetherwith the
set button to increase the sound, biggervalue, lowersound.
(9)power button press this button, the electric powerwill
be
on and the receiver stats to work and the display panel lights.
(1 O)lndicator ofcharging: put the rechargeable battery into
the battery case,the indicatoris on, itwill be dark afterfull
charging.
PDWM 2250 User Manual
Part name (Hand-held microphone)
(1 )headnet (2)indicator
(3)power switch (4 )power case
(5)8attery (6)8attery cover
Operation
1.Please take the following working flow diagram for
reference on using this machine-connect the mix
out of receiver with mic input on the amplifier.
2.Power 11 OV, switch the power, set the volume of
your sound equipment.
3. Adjust the volume in right sound, make MIC1 and
MIC2 harmony, which will make you enjoying the
sound well.
4.Please plug out the power if you will not use the
machine long time.
www.pyleaudio.com ~~LE®

Rear Panel
(1) (4)ATTN Port:
install ATTN A. ATTN B
(2)Mix out socket
(3)power: 11 OV/60Hz
(5)channel B Audio out
(6)channel AAudio out
System connection flow diagram
1 RECIEVER 1-----'8-----' AMPLIFIER
L KAROKEAMPLIFIER
Installation ofreciever
• Keep the machine 1m above the ground
• Keep the machine away 1m againstthe wall.
• Pull the antenna up rightness fully
• Make the transmitter point to the antenna without barrier
• Keep the reciever away any digital equipment(such as
CD,VCD,PC.orother radio equipment)
Operation Of Hand Held Transmitter
1. First open the battery housing in anti-clockwise direction.
2.Conserve the battery inside
on the + - palarity ofbattery.
3.Fitthe battery compartment back
in clock wise direction.
4.Pull the sliting switch
of the grips to the first stage, to
the out correct signal is sent out, the white LED indicator
is light. pull second stage so as to be ready fortransm-
itting speech.
5. Remove the sliding switch to the "off' side when it is not
used.lfit is not used
for a long time. Please take out
the battery.
6.When filp the LED powerswitch
of grip up. Ifone is light.
the volume
of battery is normal, if the LED indicator is
light all the time. Ifthe LED. indicatoris neither bright,
norlight, the battery is used up recharge the battery.
Specifications
• Professional VHF 2 Channel Wireless System
• Dual Handheld Microphones Included
• Dual Telescoping ReceiverAntennas
• Dual Volume Controls With Digital Readout
• Dual Charging System
• On/OffBroadcasting Switch
• 1/4" Individual line outputs & Mixed 1/4" Outputs
• Carrier Frequency: 174MHz-216MHz
• Dynamic Range: 100dB
• Total Harmonic Distortion: 0.5%
• Frequency Response:
40Hz-18KHz
• Operation Range: 50-180 Meters
• Signal to Noise Ratio: 105dB
• Receiver Power Supply: AC
11 OV/240V
• Microphone PowerSource: 8.4
Vo lt Rechargeable
• Receiver Dimensions: 1.8" X 18.9" X 1.3"
• Microphone Dimensions: 9.6" X 0.7" X 0.5"