Pyramid DIG-4B User manual

PYRAMID DIG-4B, DIG-6B DIGITAL CLOCK
Operation Instructions
I2009 REV. G 888.479.7264
SET TIME
Plug clock into standard electrical outlet. Clock displays 88:88 (DIG-4B) or 88:88:88 (DIG-6B).
To set time, hold clock display facing towards you and locate two buttons on back of clock.
With clock display facing you, press left hand button to set hour. Press right hand button to set
minute. PM is indicated by the PM indicator light in upper left hand corner.
To change clock from 12 Hour to 24 Hour mode, locate two buttons on back of clock.
Press both buttons at same time and hold until clock displays “24” then release
buttons. Clock will display 00:00. Set time per “SET TIME”instructions above.
To return to 12 Hour mode, press two buttons again at the same time until clock
displays “12”, then release buttons. Clock will display 12:00 when ready to set time.
24 HOUR MODE (MILITARY TIME)

PYRAMID DIG-4B, DIG-6B DIGITAL CLOCK
Operation Instructions
I2009 REV. G 888.479.7264
INTERFACE
LIMITED WARRANTY
1-YEAR LIMITED WARRANTY
The DIG-4B and DIG-6B are able to interface with Pyramid time clock models 4000, 5000,
5000HD and Elite Series Time Clock Systems, PSDLAUBKK, TTPROXEK and TTELITEEK.
Each clock may also be connected to the Pyramid TimeTrax Sync™7000 Master Clock as part
of a synchronized clock system. Connection is made with RJ45 cable to any of these devices.
The manufacturer warranties this equipment to the original user against defective material or
workmanship for a period of one year from the date of purchase. The manufacturer’s
responsibility under this warranty is limited to the repair or replacement of the defective part
or parts.
The manufacturer reserves the right to determine whether the parts failed because of
defective material, workmanship, or other causes. Failure caused by accident, alteration,
misuse or improper packaging of returned unit is not covered by this warranty. All warranty
repairs must be done by Pyramid Time Systems, LLC. Any repair to the equipment other than
Pyramid Time Systems voids the warranty. Users in countries other than the USA should
contact the Dealer from whom the unit was purchased. The rights under this warranty are
limited to the original user and may not be transferred to subsequent owners.
Should you need to speak live to one of our representatives, please call toll-free (US/Canada)
at 888.479.7264 during regular business hours: 8am-5pmEST, M-F, or email
[e-mail].
TECHNICAL SUPPORT